A: B: C: D: E: F: G: H: I: J: K: L: M: N: O: P: Q: R: S: T: U: V: W: X: Y: Z: d: l: v: Á: Å: Ç: Ö: Ü:

go to papers go to Journals go to keywords go to templates and targets switch to patents switch to inventors switch to theses and dissertations back to top
RSS feed

This file created: 09/07/2011

Zabetakis D

Markowitz MA et al., Functionalized silica gel particles for molecular imprinting.
Abstracts of Papers of the American Chemical Society, 215, (COLL), 179-179, (1998)

Singh A et al., Book chapter, Incorporation of nano-particle sites in polymer matrix by metal ion imprinting,
In: Surface-controlled nanoscale materials for high added value, Gonsalves KE, Baraton M-I, Singh R, Hofmann H, Chen JX, Akkara JA (Eds.) Materials Research Society: Warrendale, Ch. 57, 199-207, (1998)

Trammell SA et al., Electrochemical detection of TNT with in-line pre-concentration using imprinted diethylbenzene-bridged periodic mesoporous organosilicas.
Sensors and Actuators B: Chemical, 155, (2), 737-744, (2011)

Zabrocki K

Wulff G et al., Enzyme-analogue built polymers and their use for the resolution of racemates.
Tetrahedron Letters, 14, (44), 4329-4332, (1973)

Wulff G et al., Über enzymanalog gebaute Polymere, 11) Bindungsstellen im Polymer mit unterschiedlicher Zahl der Haftgruppen.
Makromolekulare Chemie-Macromolecular Chemistry And Physics, 181, (3), 531-544, (1980)

Zaccheroni N

Zattoni A et al., Characterization of titanium dioxide nanoparticles imprinted for tyrosine by flow field-flow fractionation and spectrofluorimetric analysis.
Inorganica Chimica Acta, 360, (3), 1063-1071, (2007)

Zacharis CK

Theodoridis G et al., Automated sample preparation based on the sequential injection principle - Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography.
Journal of Chromatography A, 1030, (1-2), 69-76, (2004)

Zaera F

Lee I et al., Chiral templating of surfaces: Adsorption of (S)-2-methylbutanoic acid on Pt(111) single-crystal surfaces.
Journal of the American Chemical Society, 128, (27), 8890-8898, (2006)

Zagatto EAG

Dias ACB et al., Molecularly imprinted polymer as a solid phase extractor in flow analysis.
Talanta, 76, (5), 988-996, (2008)

Zagorodni AA

Molochnikov LS et al., Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation.
Polymer, 44, (17), 4805-4815, (2003)

Zai YH

Liu YW et al., Highly selective determination of methylmercury with methylmercury-imprinted polymers.
Analytica Chimica Acta, 575, (2), 159-165, (2006)

Zaidi SA

Zaidi SA et al., Robust open tubular layer of S-ketoprofen imprinted polymer for chiral LC separation.
Journal of Separation Science, 31, (16-17), 2962-2970, (2008)

Zaidi SA et al., Preparation of an open-tubular capillary column with a monolithic layer of S-ketoprofen imprinted and 4-styrenesulfonic acid incorporated polymer and its enhanced chiral separation performance in capillary electrochromatography.
Journal of Chromatography A, 1216, (14), 2947-2952, (2009)

Zaidi SA et al., Open tubular layer of S-ofloxacin imprinted polymer fabricated in silica capillary for chiral CEC separation.
Journal of Separation Science, 32, (7), 996-1001, (2009)

Zaidi SA et al., Long open tubular molecule imprinted polymer capillary columns with excellent separation efficiencies in chiral and non-chiral separation by capillary electrochromatography.
Electrophoresis, 30, (9), 1603-1607, (2009)

Zaidi SA et al., Comparison of enantioselective CEC separation of OT-MIP capillary columns with templates of various camphor derivatives made by the pre-established general preparation protocol.
Bulletin of the Korean Chemical Society, 31, (10), 2934-2938, (2010)

Zaidi SA et al., Preparation of open tubular molecule imprinted polymer capillary columns with various templates by a generalized procedure and their chiral and non-chiral separation performance in CEC.
Electrophoresis, 31, (6), 1019-1028, (2010)

Zaidi SA et al., Open tubular capillary columns with basic templates made by the generalized preparation protocol in capillary electrochromatography chiral separation and template structural effects on chiral separation capability.
Journal of Chromatography A, 1218, (9), 1291-1299, (2011)

Zaidi SA et al., Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol.
Chromatographia, 73, (5), 517-525, (2011)

Zaitsu K

Hamase K et al., Enantio-selective derivatization of amino compounds in the presence of a molecular imprint polymer.
Analytical Sciences, 15, (5), 411-412, (1999)

Hamase K et al., Selective masking of amino groups during fluorescence derivatization in the presence of a molecular imprint polymer.
Analytical Sciences, 16, (4), 417-419, (2000)

Zaitz MM

Tobiasz A et al., Cu(II)-imprinted styrene-divinylbenzene beads as a new sorbent for flow injection-flame atomic absorption determination of copper.
Microchemical Journal, 93, (1), 87-92, (2009)

Zakaria ND

Zakaria ND et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for 2, 4-Dinitrophenol.
International Journal of Molecular Sciences, 10, (1), 354-365, (2009)

Zakaria ND et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for 2, 4-Dinitrophenol Uptake Using 4-Vinylbenzoic Acid as the Complexing Monomer.
Asian Journal of Chemistry, 23, (6), 2456-2460, (2011)

Zaker B

Jafari MT et al., Ion Mobility Spectrometry as a Detector for Molecular Imprinted Polymer Separation and Metronidazole Determination in Pharmaceutical and Human Serum Samples.
Analytical Chemistry, 81, (9), 3585-3591, (2009)

Zalacain A

Garde-Cerdán T et al., Molecularly Imprinted Polymer-Assisted Simple Clean-Up of 2, 4, 6-Trichloroanisole and Ethylphenols from Aged Red Wines.
American Journal of Enology and Viticulture, 59, (4), 396-400, (2008)

Zaltsman A

Marx S et al., Molecular imprinting of sol gel polymers for the detection of paraoxon in water.
International Journal of Environmental Analytical Chemistry, 83, (7-8), 671-680, (2003)

Marx S et al., Parathion sensor based on molecularly imprinted sol-gel films.
Analytical Chemistry, 76, (1), 120-126, (2004)

Zamaratskaia G

Hjertén S et al., Gels mimicking antibodies in their selective recognition of proteins.
Chromatographia, 44, (5-6), 227-234, (1997)

Zambonin PG

Malitesta C et al., Molecularly imprinted electrosynthesized polymers: New materials for biomimetic sensors.
Analytical Chemistry, 71, (7), 1366-1370, (1999)

Zamora O

Zamora O et al., Determination of benzimidazole fungicides in water samples by on-line MISPE–HPLC.
Analytical and Bioanalytical Chemistry, 393, (6), 1745-1753, (2009)

Zandanel C

Curcio P et al., Semi-Covalent Surface Molecular Imprinting of Polymers by One-Stage Mini-emulsion Polymerization: Glucopyranoside as a Model Analyte.
Macromolecular Bioscience, 9, (6), 596-604, (2009)

Zandanel C et al., Permethacrylated carbohydrates: synthesis and reactivity in glycosidation reaction.
Tetrahedron, 65, (45), 9395-9402, (2009)

Zander A

Zander A et al., Analysis of nicotine and its oxidation products in nicotine chewing gum by a molecularly imprinted solid phase extraction.
Analytical Chemistry, 70, (15), 3304-3314, (1998)

Zandieh A

Kaffashi B et al., Drug release study of systems containing the tragacanth and collagen composite: Release characterization and viscoelastic measurements.
Macromolecular Symposia, 239, (1), 120-129, (2006)

Zandler ME

Pietrzyk A et al., Melamine Acoustic Chemosensor Based on Molecularly Imprinted Polymer Film.
Analytical Chemistry, 81, (24), 10061-10070, (2009)

Pietrzyk A et al., Molecularly imprinted poly[bis(2, 2'-bithienyl)methane] film with built-in molecular recognition sites for a piezoelectric microgravimetry chemosensor for selective determination of dopamine.
Bioelectrochemistry, 80, (1), 62-72, (2010)

Pietrzyk A et al., Molecularly imprinted polymer (MIP) based piezoelectric microgravimetry chemosensor for selective determination of adenine.
Biosensors and Bioelectronics, 25, (11), 2522-2529, (2010)

Zang T

Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)

Zanganeh AR

Zanganeh AR et al., Polypyrrole-modified electrodes with induced recognition sites for potentiometric and voltammetric detection of copper(II) ion.
Sensors and Actuators B: Chemical, 135, (1), 358-365, (2008)

Zanin GM

Soares CMF et al., Molecular imprinting of b-cyclodextrin/cholesterol template into a silica polymer for cholesterol separation.
Journal Of Inclusion Phenomena And Macrocyclic Chemistry, 57, (1), 79-82, (2007)

Zapadinskii BI

Losev VV et al., An acoustic study of the selective absorption of vapors by microporous polymer films (Original Russian Text published in Khimicheskaya Fizika, 2009, Vol. 28, No. 11, pp. 79–92.).
Russian Journal of Physical Chemistry B, Focus on Physics, 3, (6), 990-1003, (2009)

Zapf PJ

Chesnut DJ et al., Organic/inorganic composite materials: the roles of organoamine ligands in the design of inorganic solids.
Coordination Chemistry Reviews, 190-192, (1), 737-769, (1999)

Zare M

Alizadeh T et al., Multivariate optimization of molecularly imprinted polymer solid-phase extraction applied to parathion determination in different water samples.
Analytica Chimica Acta, 638, (2), 154-161, (2009)

Alizadeh T et al., A novel high selective and sensitive para-nitrophenol voltammetric sensor, based on a molecularly imprinted polymer-carbon paste electrode.
Talanta, 79, (5), 1197-1203, (2009)

Alizadeh T et al., Development of a voltammetric sensor based on a molecularly imprinted polymer (MIP) for caffeine measurement.
Electrochimica Acta, 55, (5), 1568-1574, (2010)

Alizadeh T et al., A new molecularly imprinted polymer (MIP)-based electrochemical sensor for monitoring 2, 4, 6-trinitrotoluene (TNT) in natural waters and soil samples.
Biosensors and Bioelectronics, 25, (5), 1166-1172, (2010)

Alizadeh T et al., Application of an Hg2+ selective imprinted polymer as a new modifying agent for the preparation of a novel highly selective and sensitive electrochemical sensor for the determination of ultratrace mercury ions.
Analytica Chimica Acta, 689, (1), 52-59, (2011)

Alizadeh T et al., A carbon paste electrode impregnated with Cd2+ imprinted polymer as a new and high selective electrochemical sensor for determination of ultra-trace Cd2+ in water samples.
Journal of Electroanalytical Chemistry, 657, (1-2), 98-106, (2011)

Zatolochnaya OA

Karakhanov EA et al., Oxidation of 2-naphthol in the presence of catalysts based on modified ?-cyclodextrins.
Petroleum Chemistry, 47, (6), 402-408, (2007)

Zattoni A

Zawadzka I

Rodziewicz L et al., Determination of chloramphenicol residues in milk powder using molecular imprinted polymers (MIP) by LC-MS/MS [Zastosowanie polimerów z odwzorowaniem czasteczkowym do oznaczania pozostalosci chloramfenikolu w mleku w proszku metoda LC-MS/MS.].
Roczniki Panstwowego Zakladu Higieny, 61, (3), 249-252, (2010)

Zayas HA

Zayas HA et al., Synthesis of biaryl-styrene monomers by microwave-assisted Suzuki coupling.
Tetrahedron Letters, 50, (43), 5894-5895, (2009)

Zayats M

Sallacan N et al., Imprinting of nucleotide and monosaccharide recognition sites in acrylamidephenylboronic acid-acrylamide copolymer membranes associated with electronic transducers.
Analytical Chemistry, 74, (3), 702-712, (2002)

Zayats M et al., Imprinting of specific molecular recognition sites in inorganic and organic thin layer membranes associated with ion-sensitive field-effect transistors.
Tetrahedron, 58, (4), 815-824, (2002)

Pogorelova SP et al., Analysis of NAD(P)+/NAD(P)H cofactors by imprinted polymer membranes associated with ion-sensitive field-effect transistor devices and Au-quartz crystals.
Analytical Chemistry, 75, (3), 509-517, (2003)

Raitman OA et al., Analysis of NAD(P)+ and NAD(P)H cofactors by means of imprinted polymers associated with Au surfaces: A surface plasmon resonance study.
Analytica Chimica Acta, 504, (1), 101-111, (2004)

Zayats M et al., Molecular Imprinting of Maltose Binding Protein: Tuning Protein Recognition at the Molecular Level.
Macromolecules, 44, (10), 3966-3972, (2011)

Zdyrko B

Zdyrko B et al., Protein imprinting through reactive reading.
Abstracts of Papers of the American Chemical Society, 229, (COLL), 258-258, (2005)

Zdyrko B et al., Protein imprinting via solvent assisted grafting of polymer brush.
Abstracts of Papers of the American Chemical Society, 230, 412-POLY, (2005)

Zdyrko B et al., Protein imprinting via solvent assisted grafting of polymer brush.
Polymer Preprints, 46, (2), 76-77, (2005)

Zdyrko B et al., Nano-patterning with polymer brushes via solvent-assisted polymer grafting.
Soft Matter, 4, (11), 2213-2219, (2008)

Zdyrko B et al., Toward protein imprinting with polymer brushes.
Biointerphases, 4, (2), FA17-FA21, (2009)

Zeidan RK

Margelefsky EL et al., Book chapter, Heterogeneous Catalyst Design by Multiple Functional Group Positioning in Organic-Inorganic Materials: On the Route to Analogs of Multifunctional Enzymes,
In: Model Systems in Catalysis, Rioux RM (Ed.) Springer: New York, Ch. 23, 495-516, (2010)

Zeinali M

Jayasundera S et al., Investigation of Surface Interactions in Molecular Recognition of Phosphonate Imprinted Organosilicates and the Role of Water.
Journal of Physical Chemistry B, 110, (37), 18121-18125, (2006)

Johnson-White B et al., Detection of organics using porphyrin embedded nanoporous organosilicas.
Biosensors and Bioelectronics, 22, (6), 1154-1162, (2007)

Johnson-White B et al., Sunlight-catalyzed conversion of cyclic organics with novel mesoporous organosilicas.
Catalysis Communications, 8, (7), 1052-1056, (2007)

Trammell SA et al., Nanoporous Organosilicas as Preconcentration Materials for the Electrochemical Detection of Trinitrotoluene.
Analytical Chemistry, 80, (12), 4627-4633, (2008)

Borghard WG et al., Characterization and Testing of Periodic Mesoporous Organosilicas as Potential Selective Benzene Adsorbents.
Langmuir, 25, (21), 12661-12669, (2009)

Zeldin M

Fife WK et al., Pyridinyl-substituted and 1-oxypyridinyl-substituted silanes and siloxanes - new catalysts for interfacial transacylation reactions.
Advances in Chemistry Series, (224), 99-111, (1990)

Zeng AG

Zhang QQ et al., Preparation and Evaluation of Propranolol-Imprinted Monolithic Stationary Phase by In Situ Technique and Application in Analysis of Propranolol in Biological Samples.
Analytical Letters, 42, (3), 536-554, (2009)

Amut E et al., In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study.
Journal of Polymer Research, 17, (3), 401-409, (2010)

Zeng G

Chen H et al., To Construct "Ion Traps" for Enhancing the Permselectivity and Permeability of Polyelectrolyte Multilayer Films.
Macromolecules, 40, (3), 653-660, (2007)

Zeng G et al., Combining Hydrogen-Bonding Complexation in Solution and Hydrogen-Bonding-Directed Layer-by-Layer Assembly for the Controlled Loading of a Small Organic Molecule into Multilayer Films.
Langmuir, 23, (23), 11631-11636, (2007)

Zeng GM

Gong JL et al., A novel electrosynthesized polymer applied to molecular imprinting technology.
Talanta, 61, (4), 447-453, (2003)

Gong JL et al., Capacitive chemical sensor for fenvalerate assay based on electropolymerized molecularly imprinted polymer as the sensitive layer.
Analytical and Bioanalytical Chemistry, 379, (2), 302-307, (2004)

Huan SY et al., Determination of heavy metal ions in mixed solution by imprinted SAMs.
Electrochimica Acta, 49, (25), 4273-4280, (2004)

Huan SY et al., Selective electrochemical molecular recognition of benzenediol isomers using molecularly imprinted TiO2 film electrodes.
Analytica Chimica Acta, 506, (1), 31-39, (2004)

Zeng H

Peng L et al., Molecularly imprinted polymer for solid-phase extraction of rutin in complicated traditional Chinese medicines.
Analyst, 136, (4), 756-763, (2011)

Zhu HB et al., Development and characterization of molecularly imprinted polymer microspheres for the selective detection of kaempferol in traditional Chinese medicines.
Analytical Methods, 3, (2), 348-355, (2011)

Zeng HA

Yuan Y et al., Development and characterization of molecularly imprinted polymers for the selective enrichment of podophyllotoxin from traditional Chinese medicines.
Analytica Chimica Acta, 695, (1-2), 63-72, (2011)

Zeng HH

Liu C et al., Synthesis of Lidocaine Molecularly Imprinted Polymers and Application on Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 38, (11), 1652-1656, (2010)

Zeng JB

Zeng JB et al., Recent Development of Laboratory-made Solid-phase Microextraction Fibers on the Application of Food Safety Analysis.
Food Science and Biotechnology, 18, (3), 579-585, (2009)

Zeng JX

Liu K et al., Application of a novel electrosynthesized polydopamine-imprinted film to the capacitive sensing of nicotine.
Analytical and Bioanalytical Chemistry, 385, (4), 724-729, (2006)

Zeng LG

Cheng GX et al., The surface imprinted polystyrene beads prepared via emulsion templates.
Chinese Chemical Letters, 15, (2), 242-245, (2004)

Zeng QB

Zeng QB et al., Synthesis of Metalloporphyrin-Based Molecularly Imprinted Polymer and Its Recognition Properties for Triazole Fungicides.
Acta Polymerica Sinica, (8), 809-814, (2009)

Zeng QL

Chen LG et al., Preparation of magnetic molecularly imprinted polymer for the separation of tetracycline antibiotics from egg and tissue samples.
Journal of Chromatography A, 1216, (18), 3710-3719, (2009)

Chen LG et al., On-line Coupling of Solid-Phase Extraction to Liquid Chromatography-A Review.
Journal of Chromatographic Science, 47, (8), 614-623, (2009)

Chen LG et al., Fast and Selective Extraction of Sulfonamides from Honey Based on Magnetic Molecularly Imprinted Polymer.
Journal of Agricultural and Food Chemistry, 57, (21), 10073-10080, (2009)

Zhang XP et al., Determination of [beta]-lactam antibiotics in milk based on magnetic molecularly imprinted polymer extraction coupled with liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 878, (32), 3421-3426, (2010)

Zeng SJ

Liu HM et al., Uniformly sized [beta]-cyclodextrin molecularly imprinted microspheres prepared by a novel surface imprinting technique for ursolic acid.
Analytica Chimica Acta, 628, (1), 87-94, (2008)

Liu HM et al., Solid-phase extraction of ursolic acid from herb using b-cyclodextrin-based molecularly imprinted microspheres.
Journal of Separation Science, 31, (20), 3573-3580, (2008)

Zeng T

Zeng T et al., Evaluation of the Bovine Hemoglobin Molecularly Imprinted Polymer Membrane by QCM.
Materials Science and Engineering, 33, (5), 63-67, (2011)

Zeng WP

Yao LD et al., An Electrochemical Sensor for Phenylephrine Based on Molecular Imprinting.
Analytical Sciences, 25, (9), 1089-1093, (2009)

Zeng XF

Zeng XF et al., Synthesis and characterization of site-selective ion-exchange resins templated for lead(II) ion.
Separation Science And Technology, 31, (17), 2403-2418, (1996)

Zeng XF et al., Templated polymers for the selective sequestering and sensing of metal ions.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 146-146, (1997)

Zeng XF et al., A lead ion-imprinted polymer and its application in a lead ion-selective electrode.
Abstracts of Papers of the American Chemical Society, 213, (IEC), 24-24, (1997)

Bae SY et al., Photometric method for the determination of Pb2+ following separation and preconcentration using a templated ion-exchange resin.
Journal of Analytical Atomic Spectrometry, 13, (10), 1177-1180, (1998)

Zeng XF et al., Book chapter, Imprinted polymers for the selective sequestering and sensing of metal ions,
In: Molecular and Ionic Recognition with Imprinted Polymers, Bartsch RA, Maeda M (Eds.) The American Chemical Society: Washington DC, Ch. 15, 218-237, (1998)

Zeng XS

Lu CY et al., Molecularly imprinted polymer with calix[4]arene derivative for the recognition of acetanilide.
Chinese Journal of Chemistry, 22, (3), 275-278, (2004)

Lu CY et al., Molecularly imprinted polymer with bi-functional monomers of calix arene derivative and acrylamide for selective recognition of hydantoin-based compounds.
Chemical Journal of Chinese Universities, 26, (10), 1820-1824, (2005)

Zeng Y

Wen QA et al., Microwave-assisted Heating for Rapid Preparation and On-line Enrichment Application of Core-shell Uridine Imprinted Polymer.
Acta Chimica Sinica, 69, (2), 209-214, (2011)

Zeng YB

Lei XL et al., Preparation of Rhodamine B Molecularly Imprinted Polymer Microspheres and Its Application in Solid Phase Extraction.
Chinese Journal of Applied Chemistry, 28, (05), 531-536, (2011)

Zeng YN

Zeng YN et al., Preparation and cyclic voltammetry characterization of Cu-dipyridyl imprinted polymer.
Chinese Chemical Letters, 13, (4), 317-320, (2002)

Zeng YN et al., Cyclic voltammetry characterization of metal complex imprinted polymer.
Journal of Molecular Recognition, 15, (4), 204-208, (2002)

Zeng ZL

He LM et al., Novel cyromazine imprinted polymer applied to the solid-phase extraction of melamine from feed and milk samples.
Journal of Chromatography A, 1216, (34), 6196-6203, (2009)

He LM et al., Solid-phase extraction of melamine from aqueous samples using water-compatible molecularly imprinted polymers.
Journal of Separation Science, 32, (19), 3310-3318, (2009)

Guo HB et al., Molecularly imprinted solid-phase extraction for the selective determination of valnemulin in feeds with high performance liquid chromatography.
Journal of Chromatography B, 879, (2), 181-185, (2011)

Zheng YQ et al., Molecularly imprinted solid-phase extraction for determination of tilmicosin in feed using high performance liquid chromatography.
Analytica Chimica Acta, 690, (2), 269-274, (2011)

Zeng ZR

Cai LS et al., Molecularly imprinted polymer for theophylline retention and molecular recognition properties in capillary electrochromatography.
Wuhan University Journal of Natural Sciences, 9, (3), 359-365, (2004)

Zeng ZY

Zeng ZY et al., Synthetic Polymer Nanoparticles with Antibody-like Affinity for a Hydrophilic Peptide.
ACS Nano, 4, (1), 199-204, (2009)

Zentel R

Wulff G et al., Cooperativity and transfer of chirality in liquid-crystalline polymers.
Angewandte Chemie-International Edition In English, 33, (2), 188-191, (1994)

Zeraatkar A

Alizadeh T et al., A novel high selective and sensitive para-nitrophenol voltammetric sensor, based on a molecularly imprinted polymer-carbon paste electrode.
Talanta, 79, (5), 1197-1203, (2009)

Zhai CX

Zhai CX et al., Molecularly imprinted layer-coated silica nanoparticles toward highly selective separation of active diosgenin from Dioscorea nipponica Makino.
Journal of Chromatography A, 1216, (12), 2254-2262, (2009)

Zhai MJ

Zhao WH et al., Preparation of dummy template imprinted polymers at surface of silica microparticles for the selective extraction of trace bisphenol A from water samples.
Journal of Hazardous Materials, 179, (1-3), 223-229, (2010)

Zhu R et al., Molecularly imprinted layer-coated silica nanoparticles for selective solid-phase extraction of bisphenol A from chemical cleansing and cosmetics samples.
Analytica Chimica Acta, 658, (2), 209-216, (2010)

Zhai YH

He Q et al., Preconcentration and separation of Zn2+ using surface zinc(II) imprinted functionalized silica gel sorbent.
Chemia Analityczna, 51, (5), 715-725, (2006)

Chang XJ et al., Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique.
Talanta, 71, (1), 38-43, (2007)

He Q et al., Synthesis and applications of surface-grafted Th(IV)-imprinted polymers for selective solid-phase extraction of thorium(IV).
Analytica Chimica Acta, 605, (2), 192-197, (2007)

Zhai YH et al., Selective solid-phase extraction of trace cadmium(II) with an ionic imprinted polymer prepared from a dual-ligand monomer.
Analytica Chimica Acta, 593, (1), 123-128, (2007)

Chang XJ et al., Silica gel surface-imprinted solid-phase extraction of Zr(IV) from aqueous solutions.
Microchimica Acta, 162, (1), 113-119, (2008)

Zhai YH et al., Metal ion-small molecule complex imprinted polymer membranes: Preparation and separation characteristics.
Reactive and Functional Polymers, 68, (1), 284-291, (2008)

Zhai YH et al., Selective enrichment of trace copper(II) from biological and natural water samples by SPE using ion-imprinted polymer.
Journal of Separation Science, 31, (6-7), 1195-1200, (2008)

Zhan HJ

He JA et al., Preparation and evaluation of molecularly imprinted solid-phase micro-extraction fibers for selective extraction of phthalates in an aqueous sample.
Analytica Chimica Acta, 674, (1), 53-58, (2010)

Zhan J

Zhan J et al., Adsorption of Cr(III) by a membrane molecularly imprinted with Penicillium mycelium.
Journal of Beijing University of Chemical Technology (Natural Science Edition), 37, (4), 94-97, (2010)

Zhan SZ

Zhan SZ et al., Synthesis, recognition and separation of print molecule in molecularly imprinted polymers.
Analytical Letters, 32, (4), 677-687, (1999)

Li P et al., Book chapter, Resolution of amino acid derivative on molecularly imprinted polymer,
In: IEEE-EMBS Asia Pacific Conference on Biomedical Engineering - Proceedings, Pts 1 & 2, Zheng XX, He B, Zhang YT (Eds.) World Publishing Corporation: Beijing, 419-420, (2000)

Zhan YC

Luo XB et al., Novel molecularly imprinted polymer using 1-([alpha]-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1218, (8), 1115-1121, (2011)

Luo XB et al., Removal of water-soluble acid dyes from water environment using a novel magnetic molecularly imprinted polymer.
Journal of Hazardous Materials, 187, (1-3), 274-282, (2011)

Zhan YC et al., Selective Separation of Cu(II) from Aqueous Solution with a Novel Cu(II) Surface Magnetic Ion-Imprinted Polymer.
Industrial & Engineering Chemistry Research, 50, (10), 6355-6361, (2011)

Zhang AD

Du D et al., Recognition of dimethoate carried by bi-layer electrodeposition of silver nanoparticles and imprinted poly-o-phenylenediamine.
Electrochimica Acta, 53, (22), 6589-6595, (2008)

Chen SZ et al., Rational design and application of molecularly imprinted sol-gel polymer for the electrochemically selective and sensitive determination of Sudan I.
Talanta, 84, (2), 451-456, (2011)

Zhang AM

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)

Zhang AQ

Zhang BF

Jin GY et al., Imprinted functionalized silica sol-gel for solid-phase extraction of triazolamin.
Talanta, 84, (3), 644-650, (2011)

Zhang BH

Guo TY et al., Surface metal ion-imprinted resins prepared by emulsifier-free emulsion polymerization using phosphoric diester as functional monomer.
Chinese Journal of Reactive Polymers, 12, (1), 92-96, (2003)

Guo TY et al., Chemically modified chitosan beads as molecularly imprinted polymer matrix for adsorptive separation of proteins.
Chinese Chemical Letters, 15, (11), 1339-1341, (2004)

Guo TY et al., Molecular imprinting polymers for chiral separation of amino acid derivatives.
Progress In Chemistry, 16, (4), 638-642, (2004)

Guo TY et al., Adsorptive separation of hemoglobin by molecularly imprinted chitosan beads.
Biomaterials, 25, (27), 5905-5912, (2004)

Guo TY et al., Uniform-sized molecularly imprinted polymer for N-carbobenzoxy-L-tryptophan and its chromatographic properties.
Chinese Journal of Analytical Chemistry, 32, (6), 705-709, (2004)

Guo TY et al., Preparation of uniform-sized molecularly imprinted polymer microspheres using N-Cbz-L-Trp as template.
Chemical Journal of Chinese Universities, 25, (4), 762-765, (2004)

Guo TY et al., Chemically modified chitosan beads as matrices for adsorptive separation of proteins by molecularly imprinted polymer.
Carbohydrate Polymers, 62, (3), 214-221, (2005)

Guo TY et al., Preparation and properties of uniform-sized polymer beads imprinted with N-CBZ-L-phenylalanine.
International Journal of Polymeric Materials, 54, (8), 743-755, (2005)

Guo TY et al., Chitosan beads as molecularly imprinted polymer matrix for selective separation of proteins.
Biomaterials, 26, (28), 5737-5745, (2005)

Xia YQ et al., Hemoglobin recognition by imprinting in semi-interpenetrating polymer network hydrogel based on polyacrylamide and chitosan.
Biomacromolecules, 6, (5), 2601-2606, (2005)

Xia YQ et al., Selective separation of quercetin by molecular imprinting using chitosan beads as functional matrix.
Reactive and Functional Polymers, 66, (12), 1734-1740, (2006)

Xia YQ et al., Adsorption dynamics and thermodynamics of Hb on the Hb-imprinted polymer beads.
Reactive and Functional Polymers, 68, (1), 63-69, (2008)

Xia YQ et al., Protein recognition onto silica particles using chitosan as intermedium substrate.
Journal of Biomedical Materials Research Part A, 90A, (2), 326-332, (2009)

Zhang BL

Xia YQ et al., Hemoglobin recognition by imprinting in semi-interpenetrating polymer network hydrogel based on polyacrylamide and chitosan.
Biomacromolecules, 6, (5), 2601-2606, (2005)

Xia YQ et al., Selective separation of quercetin by molecular imprinting using chitosan beads as functional matrix.
Reactive and Functional Polymers, 66, (12), 1734-1740, (2006)

Xia YQ et al., Adsorption dynamics and thermodynamics of Hb on the Hb-imprinted polymer beads.
Reactive and Functional Polymers, 68, (1), 63-69, (2008)

Xia YQ et al., Protein recognition onto silica particles using chitosan as intermedium substrate.
Journal of Biomedical Materials Research Part A, 90A, (2), 326-332, (2009)

Zhang C

Busch D et al., Exploiting ultra tight-binding ligands for separations technologies.
Abstracts of Papers of the American Chemical Society, 226, U88-U88, (2003)

Wang S et al., Molecularly imprinted polymer for the determination of trace ractopamine in pork using SPE followed by HPLC with fluorescence detection.
Journal of Separation Science, 32, (9), 1333-1339, (2009)

Duan YQ et al., Optimization of the process parameters of synthesis of oligomeric procyanidins imprinted polymer.
Scientific Research and Essays, 5, (19), 2953-2964, (2010)

Zhang CC

Yu JH et al., Highly selective molecular recognition and high throughput detection of melamine based on molecularly imprinted sol-gel film.
Analytica Chimica Acta, 651, (2), 209-214, (2009)

Yu JH et al., Quantification of Sorbic Acid Using the Molecularly Imprinted Chemiluminescence Method with Rhodanine Derivative.
Analytical Sciences, 25, (11), 1351-1356, (2009)

Yu JH et al., Highly selective determination of phenolphthalein by flow injection chemiluminescence method based on a molecular imprinting polymer.
Luminescence, 24, (6), 444-447, (2009)

Ge SG et al., On-line molecular imprinted solid-phase extraction flow-injection fluorescence sensor for determination of florfenicol in animal tissues.
Journal of Pharmaceutical and Biomedical Analysis, 52, (4), 615-619, (2010)

Yu JH et al., Molecularly imprinted polymeric microspheres for determination of bovine serum albumin based on flow injection chemiluminescence sensor.
Biosensors and Bioelectronics, 26, (2), 632-637, (2010)

Ge SG et al., Layer-by-layer self-assembly CdTe quantum dots and molecularly imprinted polymers modified chemiluminescence sensor for deltamethrin detection.
Sensors and Actuators B: Chemical, 156, (1), 222-227, (2011)

Zhao PN et al., Determination of glyphosate in foodstuff by one novel chemiluminescence-molecular imprinting sensor.
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 78, (5), 1482-1486, (2011)

Zhang CJ

Zhong SA et al., Preparation and separation of cellulose acetate-(S)-naproxen molecularly imprinted composite membrane.
Journal of Central South University (Science and Technology), 37, (6), 1122-1126, (2006)

Zhang CJ et al., Cellulose acetate-based molecularly imprinted polymeric membrane for separation of vanillin and o-vanillin.
Brazilian Journal of Chemical Engineering, 25, (2), 365-373, (2008)

Yang ZP et al., Designing of MIP-based QCM sensor for the determination of Cu(II) ions in solution.
Sensors and Actuators B: Chemical, 142, (1), 210-215, (2009)

Yang ZP et al., Enhanced removal of bilirubin on molecularly imprinted titania film.
Colloids and Surfaces B: Biointerfaces, 87, (1), 187-191, (2011)

Zhang CL

Zhang CL et al., Synthesis of molecularly imprinted polymer for Rifampicin and its adsorption.
The Chinese Journal of Process Engineering, 9, (3), 608-612, (2009)

Zhou YM et al., Molecular imprinting-flow injection chemiluminescence method for determination of doxycycline hydrochloride.
Spectroscopy and Spectral Analysis, 29, (7), 1745-1749, (2009)

Zhang CT

Peng C et al., Preparation of a fragment imprinted polymer for recognition of triazole pesticides and its application to solid-phase extraction.
Chemical Journal of Chinese Universities, 30, (11), 2159-2164, (2009)

Zhang D

Hu XB et al., Construction of Self-Reporting Specific Chemical Sensors with High Sensitivity.
Advanced Materials, 19, (24), 4327-4332, (2007)

Zheng H et al., Highly selective determination of palladium(II) after preconcentration using Pd(II)-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique.
Microchimica Acta, 157, (1), 7-11, (2007)

Lv YK et al., Enrofloxacin-imprinted monolithic HPLC columns synthesized by in situ copolymerization for chromatographic separation.
Journal Of Liquid Chromatography & Related Technologies, 34, (9), 705-718, (2011)

Nie DX et al., Two-dimensional molecular imprinting approach for the electrochemical detection of trinitrotoluene.
Sensors and Actuators B: Chemical, 156, (1), 43-49, (2011)

Zhang DB

Shi XZ et al., Corrigendum to "Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs": [Biomaterials 28 (2007) 3741-3749].
Biomaterials, 28, (29), 4330-4330, (2007)

Shi XZ et al., Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs.
Biomaterials, 28, (25), 3741-3749, (2007)

Shi XZ et al., Molecularly imprinted polymer microspheres for solid-phase extraction of chloramphenicol residues in foods.
Journal of Chromatography B, 850, (1-2), 24-30, (2007)

Qu GR et al., Improvement on Analyte Extraction by Molecularly Imprinted Polymer Microspheres toward Enrofloxacin.
Analytical Letters, 41, (8), 1443-1458, (2008)

Song SQ et al., Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction.
Analytical and Bioanalytical Chemistry, 390, (8), 2141-2150, (2008)

Song SQ et al., Extraction of chlorpromazine with a new molecularly imprinted polymer from pig urine.
Process Biochemistry, 43, (11), 1209-1214, (2008)

Qu GR et al., Metal ion mediated synthesis of molecularly imprinted polymers targeting tetracyclines in aqueous samples.
Journal of Chromatography B, 877, (27), 3187-3193, (2009)

Zheng SL et al., Newly Combined Method of Molecularly Imprinted Solid-Phase Extraction with ELISA for Rapid Detection of Clenbuterol in Animal-Tissue Samples.
Analytical Letters, 42, (3), 600-614, (2009)

Shi XZ et al., Determination of Chloramphenicol Residues in Foods by ELISA and LC-MS/MS Coupled with Molecularly Imprinted Solid Phase Extraction.
Analytical Letters, 43, (17), 2798-2807, (2010)

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)

Zhang DN

Zhang DN et al., Selective adsorption and steric recognition by molecularly imprinted polymers: A study on molecular self-assembly and its effect on selectivity.
High Performance Polymers, 18, (6), 949-960, (2006)

Zhang DN et al., Biomimic recognition and catalysis by an imprinted catalysts: a rational design of molecular self-assembly toward predetermined high specificity.
Catalysis Letters, 115, (3), 169-175, (2007)

Li SJ et al., Rationally Designing Active Molecularly Imprinted Polymer Toward a Highly Specific Catalyst by Using Metal as an Assembled Pivot.
Journal of Inorganic and Organometallic Polymers and Materials, 18, (2), 264-271, (2008)

Zhang F

Yang ML et al., Study on the molecularly imprinted polymers with methyl-testosterone as the template.
Talanta, 81, (1-2), 156-161, (2010)

Zhang FB

Li SA et al., Molecular imprinted membrane with high flux by surface photo-grafting copolymerization.
Chinese Journal of Chemical Engineering, 13, (2), 184-190, (2005)

Zhang FF

Wang JC et al., Preparation of molecularly imprinted polymer and its recognition property for phenylurea herbicides.
Chemical Journal of Chinese Universities, 27, (7), 1227-1231, (2006)

Xiao YS et al., Systematic Separation and Preparation of Standard multi-component Collectives from Traditional Chinese Medicine.
World Science and Technology-Modernization of Traditional Chinese Medicine and Materia Medica, 3, 79-84, (2006)

Zhang FJ

Zhang FJ et al., Emulsion and macromolecules templated alginate based polymer microspheres.
Reactive and Functional Polymers, 66, (7), 712-719, (2006)

Ying XG et al., Effect on rebinding behavior with different composition and structure of the dually imprinted alginate polymer microspheres using proteins and o/w emulsion drops as dual templates.
Journal of Applied Polymer Science, 115, (6), 3516-3526, (2010)

Zhang FX

Xu ZF et al., Exploiting [beta]-cyclodextrin as functional monomer in molecular imprinting for achieving recognition in aqueous media.
Materials Science and Engineering: C, 28, (8), 1516-1521, (2008)

Xu ZF et al., Combination of hydrophobic effect and electrostatic interaction in imprinting for achieving efficient recognition in aqueous media.
Carbohydrate Polymers, 79, (3), 642-647, (2010)

Xu ZF et al., Studies on the Preparation, Mechanism of Recognition and Binding Characteristic of Ferrocenecarboxylic Acid Imprinted Polymers.
Chinese Journal of Applied Chemistry, 27, (4), 384-389, (2010)

Xu ZF et al., Construction and Catalytic Properties of Molecular Imprinting Microreactor on Multiwalled Carbon Nanotubes for Diels-Alder Reaction.
Chemical Journal of Chinese Universities, 32, (5), 1157-1162, (2011)

Zhang G

BelBruno JJ et al., Capacitive sensing of amino acids in molecularly imprinted nylon films.
Sensors and Actuators B: Chemical, 155, (2), 915-918, (2011)

Zhang GJ

Hu XH et al., Hydrogel Contact Lens for Extended Delivery of Ophthalmic Drugs.
International Journal of Polymer Science, 2011, Article ID 814163-(2011)

Zhang GL

Li SA et al., Molecular imprinted membrane with high flux by surface photo-grafting copolymerization.
Chinese Journal of Chemical Engineering, 13, (2), 184-190, (2005)

Zhang GQ

Fan ZL et al., Aminoantipyrine imprinted column prepared by in-situ polymerization and investigation of binding character in aqueous medium.
Acta Chimica Sinica, 62, (12), 1176-1179, (2004)

Li L et al., Adsorption characteristic of acetaniprid-imprinted polymer.
Ion Exchange and Adsorption, 21, (2), 168-173, (2005)

Zhang GQ et al., In-situ polymerization of aminopyrine imprinted column and investigation of binding character in aqueous medium.
Chinese Journal of Analytical Chemistry, 33, (10), 1393-1396, (2005)

Zhang H

Zhang H et al., MIP for Regioselective Huisgen 1, 3-Dipolar Cycloaddition Reaction.
Synfacts, (7), 0742-0742, (2006)

Gai P et al., Development of a highly-sensitive malachite green selective electrode.
Chinese Journal of Sensors and Actuators, 23, (8), 1062-1065, (2010)

Wang YH et al., Preparation and Application of Atrazine Molecularly Imprinted Solid Phase Extraction Pillar.
Chinese Journal of Analytical Chemistry, 38, (5), 678-682, (2010)

Zhang H et al., Characterization of molecularly imprinted monolithic column for recognition of melamine.
Chemistry Bulletin, 73, (6), 545-550, (2010)

Shen ZL et al., Selective Solid-Phase Extraction Using Molecularly Imprinted Polymer for Analysis of Methamidophos in Water and Soil Samples.
Bioscience Biotechnology and Biochemistry, 75, (3), 473-479, (2011)

Zhang HB

Zhang ZH et al., Preparation and characterization of stereoselective L-histidine imprinted microspheres.
Chemical Journal of Chinese Universities, 29, (10), 1941-1946, (2008)

Hu YF et al., Research on Self-assembly MWNTs-clindamycin Molecularly Imprinted Sol-gel Electrochemical Sensor.
Chemical Journal of Chinese Universities-Chinese, 30, (9), 1703-1708, (2009)

Zhang HB et al., Preparation and Application of Chlorogenic Acid Imprinted Solid Phase Extraction Materials Based on Multiwalled Carbon Nanotubes.
Chinese Journal of Analytical Chemistry, 37, (7), 955-959, (2009)

Zhang ZH et al., Preparation and Application of Multi-walled Carbon Nanotube Surface Benzoyl Peroxide Imprinted Composite Solid-phase Extraction Materials.
Acta Chimica Sinica, 67, (24), 2833-2839, (2009)

Zhang ZH et al., Preparation and Evaluation of Caffeine Molecularly Imprinted Composite Membrane.
Acta Chimica Sinica, 67, (18), 2121-2126, (2009)

Zhang HB et al., Preparation and adsorption properties of p-nitrophenol imprinted materials based on multi-walled carbon nanotubes surface.
Chemical Journal of Chinese Universities, 31, (11), 2141-2147, (2010)

Zhang ZH et al., Synthesis and application of core-shell complex-imprinted polymer for the solid-phase extraction of melamine from dairy products.
Journal of Separation Science, 33, (17-18), 2854-2861, (2010)

Zhang ZH et al., Synthesis and application of multi-walled carbon nanotubes-molecularly imprinted sol-gel composite material for on-line solid-phase extraction and high-performance liquid chromatography determination of trace Sudan IV.
Analytica Chimica Acta, 661, (2), 173-180, (2010)

Zhang ZH et al., Novel Layer-by-layer Assembly Multi-walled Carbon Nanotube/Resveratrol Imprinted Sol-gel Electrochemical Sensor.
Acta Chimica Sinica, 68, (5), 431-436, (2010)

Zhang ZH et al., Novel layer-by-layer assembly molecularly imprinted sol-gel sensor for selective recognition of clindamycin based on Au electrode decorated by multi-wall carbon nanotube.
Journal of Colloid and Interface Science, 344, (1), 158-164, (2010)

Zhang ZH et al., Layer-by-layer assembly sensitive electrochemical sensor for selectively probing l-histidine based on molecular imprinting sol-gel at functionalized indium tin oxide electrode.
Biosensors and Bioelectronics, 26, (2), 696-702, (2010)

Zhang ZH et al., Electrochemical layer-by-layer modified imprinted sensor based on multi-walled carbon nanotubes and sol-gel materials for sensitive determination of thymidine.
Journal of Electroanalytical Chemistry, 644, (1), 7-12, (2010)

Zhang ZH et al., Novel surface molecularly imprinted material modified multi-walled carbon nanotubes as solid-phase extraction sorbent for selective extraction gallium ion from fly ash.
Talanta, 82, (1), 304-311, (2010)

Hu YF et al., Imprinted sol-gel electrochemical sensor for the determination of benzylpenicillin based on Fe3O4@SiO2/multi-walled carbon nanotubes-chitosans nanocomposite film modified carbon electrode.
Analytica Chimica Acta, 698, (1-2), 61-68, (2011)

Hu YF et al., Electrochemical determination of l-phenylalanine at polyaniline modified carbon electrode based on [beta]-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film.
Talanta, 84, (2), 305-313, (2011)

Yang XA et al., Preparation and Evaluation Properties of Pb2+ on-Imprinted Polymers on Chitosan Modified Multi-walled Carbon Nanotube.
Chinese Journal of Analytical Chemistry, 39, (1), 34-38, (2011)

Zhang HB et al., Synthesis of a Novel Composite Imprinted Material Based on Multiwalled Carbon Nanotubes as a Selective Melamine Absorbent.
Journal of Agricultural and Food Chemistry, 59, (4), 1063-1071, (2011)

Zhang ZH et al., Novel molecularly imprinted polymers based on multi-walled carbon nanotubes with binary functional monomer for the solid-phase extraction of erythromycin from chicken muscle.
Journal of Chromatography B, 879, (19), 1617-1624, (2011)

Zhang ZH et al., Preparation and adsorption performance of gallium ion complex imprinted polymers.
Chemistry Bulletin, 74, (1), 72-77, (2011)

Zhang HC

Sun T et al., Molecular Imprinting Technology Based on Cyclodextrins.
Progress In Chemistry, 22, (5), 888-897, (2010)

Zhang HG

He YH et al., Molecular imprinting-chemiluminescence determination of analgin.
Chemical Journal of Chinese Universities, 26, (4), 642-646, (2005)

He YH et al., Molecular imprinting-chemiluminescence determination of norfloxacin using a norfloxacin-imprinted polymer as the recognition material.
Microchimica Acta, 149, (3-4), 239-244, (2005)

Zhang HG et al., Molecular imprinting-chemiluminescence determination of phenacetin.
Acta Chimica Sinica, 63, (3), 210-214, (2005)

Lu SL et al., Preparation and characteristics of Tryptophan-imprinted Fe3O4/P(TRIM) composite microspheres with magnetic susceptibility by inverse emulsion-suspension polymerization.
Journal of Applied Polymer Science, 99, (6), 3241-3250, (2006)

Zhang HH

Duan YQ et al., Optimization of the process parameters of synthesis of oligomeric procyanidins imprinted polymer.
Scientific Research and Essays, 5, (19), 2953-2964, (2010)

Zhang HL

Lu F et al., Evaluation of the binding specificity of electrosynthesized poly-ortho-phenylenediamine molecularly imprinted with metal chelates.
Microchimica Acta, 174, (1), 47-54, (2011)

Wang LY et al., Electrosynthesis and Characterization of Metal Chelate Imprinted Poly-o-Phenylenediamine Films.
Acta Physico-Chimica Sinica, 27, (6), 1451-1456, (2011)

Zhang HN

Wang ZH et al., Studies on the permeation characteristics of molecularly imprinted polymer membranes with Zinc(II)-quercetin complex as template.
Acta Chimica Sinica, 65, (18), 2019-2024, (2007)

Kang JW et al., A Novel Amperometric Sensor for Salicylic Acid Based on Molecularly Imprinted Polymer-Modified Electrodes.
Polymer-Plastics Technology and Engineering, 48, (6), 639-645, (2009)

Wang S et al., Solid Phase Extraction Using a Column with a Monolithic Molecularly Imprinted Epoxy Resin-Based Polymeric Stationary Phase. HPLC Determination of Malachite Green in Fish and Water Samples.
Chemia Analityczna, 54, (6), 1339-1353, (2009)

Guo ZY et al., Tetracycline selective electrode based on molecularly imprinted polymer particles.
Chinese Chemical Letters, 21, (10), 1235-1238, (2010)

Zhang HQ

Zhang HQ et al., 9-(Guanidinomethyl)-10-vinylanthracene: a suitable fluorescent monomer for MIPs.
Tetrahedron Letters, 42, (26), 4413-4416, (2001)

Goto H et al., Chiral stimuli-responsive gels: Helicity induction in poly(phenylacetylene) gels bearing a carboxyl group with chiral amines.
Journal of the American Chemical Society, 125, (9), 2516-2523, (2003)

Zhang HQ et al., Application of a parallel synthetic approach in atom-transfer radical polymerization: Set-up and feasibility demonstration.
Macromolecular Rapid Communications, 24, (1), 81-86, (2003)

Zhang HQ et al., Non-covalent molecular imprinting with emphasis on its application in separation and drug development.
Journal of Molecular Recognition, 19, (4), 248-259, (2006)

Zhang HQ et al., Molecularly imprinted nanoreactors for regioselective Huisgen 1, 3-dipolar cycloaddition reaction.
Journal of the American Chemical Society, 128, (13), 4178-4179, (2006)

Chen LG et al., Fast and Selective Extraction of Sulfonamides from Honey Based on Magnetic Molecularly Imprinted Polymer.
Journal of Agricultural and Food Chemistry, 57, (21), 10073-10080, (2009)

Pan GQ et al., Preparation of molecularly imprinted polymer microspheres via reversible addition-fragmentation chain transfer precipitation polymerization.
Polymer, 50, (13), 2819-2825, (2009)

Zu BY et al., Preparation of molecularly imprinted polymer microspheres via atom transfer radical precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 47, (13), 3257-3270, (2009)

Chen LG et al., Determination of fluoroquinolone antibiotics in environmental water samples based on magnetic molecularly imprinted polymer extraction followed by liquid chromatography-tandem mass spectrometry.
Analytica Chimica Acta, 662, (1), 31-38, (2010)

Li JY et al., One-pot synthesis of surface-functionalized molecularly imprinted polymer microspheres by iniferter-induced "living" radical precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (15), 3217-3228, (2010)

Pan GQ et al., An efficient approach to obtaining water-compatible and stimuli-responsive molecularly imprinted polymers by the facile surface-grafting of functional polymer brushes via RAFT polymerization.
Biosensors and Bioelectronics, 26, (3), 976-982, (2010)

Qiu JH et al., Application of surface-initiated atom transfer radical polymerization in membranes technology.
Polymeric Materials Science and Engineering, 26, (7), 167-174, (2010)

Zu BY et al., Preparation of molecularly imprinted polymers via atom transfer radical "bulk" polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (3), 532-541, (2010)

Fang LJ et al., Azobenzene-containing molecularly imprinted polymer microspheres with photoresponsive template binding properties.
Journal of Materials Chemistry, 21, (7), 2320-2329, (2011)

Zhang HS

Lu Y et al., Study on the mechanism of chiral recognition with molecularly imprinted polymers.
Analytica Chimica Acta, 489, (1), 33-43, (2003)

Cheng ZQ et al., Synthesis and characterization of an ion-imprinted polymer for selective solid phase extraction of thorium(IV).
Microchimica Acta, 173, (3), 423-431, (2011)

Zhang HT

Zhang HT et al., The Application of Molecularly Imprinted Polymer Sensor in Pesticide Detection.
Chinese Journal of Pesticide Science, 8, (1), 8-13, (2006)

Zhang HT et al., Retention behavior of phenoxyacetic herbicides on a molecularly imprinted polymer with phenoxyacetic acid as a dummy template molecule.
Bioorganic & Medicinal Chemistry, 15, (18), 6089-6095, (2007)

Zhang HT et al., Synthesis and characterization of molecularly imprinted polymers for phenoxyacetic acids.
International Journal of Molecular Sciences, 9, (1), 98-106, (2008)

Zhang HT et al., Food safety: Monitoring of organophosphate pesticide residues in crops and food.
Phosphorus Sulfur And Silicon And The Related Elements, 183, (2-3), 280-290, (2008)

Zhang HX

Hjertén S et al., Gels mimicking antibodies in their selective recognition of proteins.
Chromatographia, 44, (5-6), 227-234, (1997)

Jiang XM et al., Small organic molecular imprinted materials: their preparation and application.
Analytical and Bioanalytical Chemistry, 389, (2), 355-368, (2007)

Jiang XM et al., A novel sol-gel-material prepared by a surface imprinting technique for the selective solid-phase extraction of bisphenol A.
Talanta, 72, (1), 119-125, (2007)

Guo LY et al., Analysis of sulfamerazine in pond water and several fishes by high-performance liquid chromatography using molecularly imprinted solid-phase extraction.
Analytical and Bioanalytical Chemistry, 391, (6), 2291-2298, (2008)

Guo LY et al., Molecularly imprinted matrix solid-phase dispersion for extraction of chloramphenicol in fish tissues coupled with high-performance liquid chromatography determination.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1431-1438, (2008)

Jiang XM et al., Selective solid-phase extraction using molecular imprinted polymer for the analysis of diethylstilbestrol.
Food Chemistry, 108, (3), 1061-1067, (2008)

Ji YS et al., Preparation of magnetic molecularly imprinted polymer for rapid determination of bisphenol A in environmental water and milk samples.
Analytical and Bioanalytical Chemistry, 395, (4), 1125-1133, (2009)

Zhao CD et al., Novel molecularly imprinted polymer prepared by nanoattapulgite as matrix for selective solid-phase extraction of diethylstilbestrol.
Journal of Chromatography A, 1216, (44), 7546-7552, (2009)

Zhao CD et al., A novel molecularly imprinted polymer for simultaneous extraction and determination of sudan dyes by on-line solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1217, (45), 6995-7002, (2010)

Zhang HY

Su SF et al., HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique.
Talanta, 76, (5), 1141-1146, (2008)

Zhang J

Zhang J et al., Advances in affinity chromatography.
Chinese Journal of Chromatography, 17, (3), 253-256, (1999)

Lu CY et al., Preparation and evaluation of molecularly imprinted polymers using herbicide picloram as template.
Acta Chimica Sinica, 62, (8), 799-803, (2004)

Huang JT et al., Template imprinting amphoteric polymer for the recognition of proteins.
Journal of Applied Polymer Science, 95, (2), 358-361, (2005)

Zhang J et al., Preparation of strychnine molecularly imprinted monolithic column.
Chinese Journal of Analytical Chemistry, 33, (1), 113-116, (2005)

Zhang J et al., Chiral nanotechnology.
Chirality, 17, (7), 404-418, (2005)

Zhang J et al., Concentration and determination of strychnine alkaloid in biological fluids.
Journal of Forensic Chemistry, 21, (1), 36-38, (2005)

Zhang J et al., Chromatographic features and molecular recognition mechanism of a strychnine monolithic molecularly imprinted polymer.
Chromatographia, 62, (5-6), 319-323, (2005)

Zhao BH et al., Formation of ordered macroporous membranes from random copolymers by the breath figure method.
Polymer, 46, (22), 9508-9513, (2005)

Lin LQ et al., Concentration and extraction of sinomenine from herb and plasma using a molecularly imprinted polymer as the stationary phase.
Analytica Chimica Acta, 561, (1-2), 178-182, (2006)

Lin LQ et al., Preparation of molecularly imprinted polymer for sinomenine and study on its molecular recognition mechanism.
Polymer, 47, (11), 3792-3798, (2006)

Wang YJ et al., Specific binding of cholic acid by cross-linked polymers prepared by the hybrid imprinting method.
Polymer, 48, (19), 5565-5571, (2007)

Ali M et al., Proceeding, Templated hydrogels for combination devices: therapeutic contact lenses,
242-245, (2009)

Wang YQ et al., Electrochemical Sensors for Bisphenol A Based on Surface Molecularly Imprinting Technology and Phase Inversion Process.
Acta Chimica Sinica, 67, (13), 1475-1480, (2009)

Zhang J et al., Electrochemical Sensor for Bisphenol A Based on Molecular Imprinting Technique and Electropolymerization Membrane.
Chinese Journal of Analytical Chemistry, 37, (7), 1041-1044, (2009)

Lv RH et al., Preparation and evaluation of a molecularly imprinted polymer for tolazoline.
Journal of Applied Polymer Science, 115, (1), 198-203, (2010)

Zhang J et al., Preparation of molecular imprinted monolithic extraction column and its application to strychnine analysis in Wan Tong Jin Gu troche by HPLC.
Journal Of Liquid Chromatography & Related Technologies, 33, (6), 770-777, (2010)

Zhang J et al., Preparation and Characterization of Tolazoline Sensor Based on Molecularly Imprinted Polymer.
Acta Chimica Sinica, 68, (2), 157-161, (2010)

Zhang J et al., Electrochemical tolazoline sensor based on gold nanoparticles and imprinted poly-o-aminothiophenol film.
Electrochimica Acta, 55, (12), 4039-4044, (2010)

Li HZ et al., Flow-Injection Chemiluminescence Determination of Trace Copper On-Line Separation and Enrichment by Ion Imprinted Polymer.
Spectroscopy and Spectral Analysis, 31, (6), 1472-1475, (2011)

Ma J et al., The study of core-shell molecularly imprinted polymers of 17[beta]-estradiol on the surface of silica nanoparticles.
Biosensors and Bioelectronics, 26, (5), 2791-2795, (2011)

Wang S et al., Construction of uniformly sized pseudo template imprinted polymers coupled with HPLC-UV for the selective extraction and determination of trace estrogens in chicken tissue samples.
Journal of Hazardous Materials, 186, (2-3), 1513-1519, (2011)

Wang YQ et al., Bisphenol A sensing based on surface molecularly imprinted, ordered mesoporous silica.
Electrochimica Acta, 56, (5), 2105-2109, (2011)

Zhang JB

Vaughan AD et al., Enhancing therapeutic loading and delaying transport via molecular imprinting and living/controlled polymerization.
AIChE Journal, 56, (1), 268-279, (2010)

Zhang JH

Peng H et al., Development of a thickness shear mode acoustic sensor based on an electrosynthesized molecularly imprinted polymer using an underivatized amino acid as the template.
Analyst, 126, (2), 189-194, (2001)

Zhang JH et al., Advancement in preparation and application of MIPs.
Fangzhi Gaoxiao Jichukexue Xuebao, 16, (3), 189-194, (2003)

Lü B et al., Selective Solid-phase Extraction of Cholesterol from Different Biological Samples Using Different Molecular Imprinted Polymers.
Acta Medicinae Universitatis Science of Technologiae Huazhong, 34, (5), 639-641, (2005)

Jiang M et al., Determination of ultra-trace bisphenol A in water samples by chromatography with large volume direct injection.
Chinese Journal of Analytical Chemistry, 34, (10), 1419-1422, (2006)

Jiang M et al., Direct enrichment and high performance liquid chromatography analysis of ultra-trace Bisphenol A in water samples with narrowly dispersible Bisphenol A imprinted polymeric microspheres column.
Journal of Chromatography A, 1110, (1-2), 27-34, (2006)

Shi Y et al., Selective solid-phase extraction of cholesterol using molecularly imprinted polymers and its application in different biological samples.
Journal of Pharmaceutical and Biomedical Analysis, 42, (5), 549-555, (2006)

Zhang JH et al., Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples.
Analytical and Bioanalytical Chemistry, 385, (4), 780-786, (2006)

Jiang M et al., Preparation of Mono-disperse Bisphenol A Imprinted Polymer Microspheres and Their Chromatographic Properties.
Chinese Journal of Analytical Chemistry, 36, (8), 1089-1092, (2008)

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)

Zhang JJ

Gao RX et al., Selective extraction of sulfonamides from food by use of silica-coated molecularly imprinted polymer nanospheres.
Analytical and Bioanalytical Chemistry, 398, (1), 451-461, (2010)

Zhang JJ et al., Separation Processes in the Presence of Cyclodextrins Using Molecular Imprinting Technology and Ionic Liquid Cooperating Approach.
Current Organic Chemistry, 15, (1), 74-85, (2011)

Zhang JK

Zhang JK et al., Synthesis of Molecularly Imprinted Polymer for Sensitive Penicillin Determination in Milk.
Analytical Letters, 41, (18), 3411-3419, (2008)

Zhang JL

Zhao KY et al., The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Alginate/Phosphate Hybrid Microspheres Via the Adjustment of pH Values and Salt Concentration.
Macromolecular Symposia, 297, (1), 126-137, (2010)

Zhang JM

Li SJ et al., Selective Adsorption and Molecular Recognition by a Molecularly Imprinted Polymer: Kinetic Study and Analysis.
Journal of the Chinese Chemical Society, 55, (1), 121-128, (2008)

Li SJ et al., Rationally Designing Molecularly Imprinted Polymer Toward a High Specific Recognition by Using a Stoichiometric Self-Assembly.
Polymer-Plastics Technology and Engineering, 47, (9), 936-942, (2008)

Zheng MX et al., Molecularly imprinted polymer: Using the template-monomer strategy towards a highly selective sorbent.
Polymers & Polymer Composites, 16, (1), 47-54, (2008)

Zhang JP

Zhang HT et al., Food safety: Monitoring of organophosphate pesticide residues in crops and food.
Phosphorus Sulfur And Silicon And The Related Elements, 183, (2-3), 280-290, (2008)

Zhang JQ

Huang JT et al., Molecularly imprinting of polymeric nucleophilic catalysts containing 4-alkylaminopyridine functions.
Polymer, 45, (12), 4349-4354, (2004)

Huang JT et al., Template imprinting amphoteric polymer for the recognition of proteins.
Journal of Applied Polymer Science, 95, (2), 358-361, (2005)

Zhang JY

Yang YJ et al., Optimization of polymerization parameters for the sorption of oseltamivir onto molecularly imprinted polymers.
Analytical and Bioanalytical Chemistry, 400, (10), 3665-3674, (2011)

Zhang K

Liu JQ et al., Generation of a glutathione peroxidase-like mimic using bioimprinting and chemical mutation.
Chemical Communications, (2), 199-200, (1999)

Liu JQ et al., Bioimprinted protein exhibits glutathione peroxidase activity.
Analytica Chimica Acta, 504, (1), 185-189, (2004)

Zhang KH

Xie FZ et al., Preparation of Pb2+ Double-template Imprinted Sorbent for Selective Separation of Pb2+ from Environmental Water and Sediment Samples.
Chinese Journal of Analytical Chemistry, 39, (1), 77-81, (2011)

Zhang KJ

Si HZ et al., QSAR Model for Prediction Capacity Factor of Molecular Imprinting Polymer Based on Gene Expression Programming.
QSAR & Combinatorial Science, 26, (1), 41-50, (2007)

Zhang L

Yang J et al., A new molecularly imprinted polymer for solid-phase extraction of cotinine from human urine.
Chinese Chemical Letters, 16, (11), 1503-1506, (2005)

Wang H et al., Study of enantioselective binding and transportation properties of molecularly imprinted membrane for amino acid hydantoins.
Chemical Research and Application, 18, (3), 261-265, (2006)

Liu PY et al., Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin.
Chemistry Bulletin, 71, (2), 132-137, (2008)

Liu PY et al., Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin.
Frontiers of Chemistry in China, 3, (4), 378-383, (2008)

Zhao ZJ et al., Structured Water and Water-Polymer Interactions in Hydrogels of Molecularly Imprinted Polymers.
Journal of Physical Chemistry B, 112, (25), 7515-7521, (2008)

Wang XW et al., Enrichment and separation of silver from waste solutions by metal ion imprinted membrane.
Hydrometallurgy, 100, (1-2), 82-86, (2009)

Cai D et al., A molecular-imprint nanosensor for ultrasensitive detection of proteins.
Nature Nanotechnology, 5, (8), 597-601, (2010)

Chang J et al., The development of molecularly imprinted technology research in forensic science toxicology.
Chinese Journal of Forensic Medicine, 25, (6), 411-413, (2010)

Chang YH et al., Desulfurization of Gasoline using Molecularly Imprinted Chitosan as Selective Adsorbents.
Applied Biochemistry and Biotechnology, 160, (2), 593-603, (2010)

Qiu LJ et al., Preparation and application of solid-phase microextraction fiber based on molecularly imprinted polymer for determination of anabolic steroids in complicated samples.
Journal of Chromatography A, 1217, (48), 7461-7470, (2010)

Qu P et al., Molecularly imprinted magnetic nanoparticles as tunable stationary phase located in microfluidic channel for enantioseparation.
Journal of Chromatography A, 1217, (39), 6115-6121, (2010)

Zhang M et al., Preparation and application of core-shell benzoyl peroxide imprinted sol-gel polymers.
Chemistry Bulletin, 73, (2), 160-165, (2010)

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)

Hua KC et al., Surface hydrophilic modification with a sugar moiety for a uniform-sized polymer molecularly imprinted for phenobarbital in serum.
Acta Biomaterialia, 7, (8), 3086-3093, (2011)

Liu BJ et al., As(III) removal from aqueous solution using [alpha]-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)

Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)

Qu P et al., Convenient enantioseparation by monolithic imprinted capillary clamped in a chip with electrochemical detection.
Electrophoresis, 32, (12), 1522-1529, (2011)

Qu P et al., Simultaneous multiple enantioseparation with a one-pot imprinted microfluidic channel by microchip capillary electrochromatography.
Analyst, 136, (5), 920-926, (2011)

Zhang LF

Zhang LF, Study on Molecular Imprinted Technique and Its Application in Microanalysis.
Journal of Hebei North University (Natural Science Edition), 21, (3), 13-17, (2005)

Zhang LG

Ying XG et al., Specific rebinding property of protein macromolecularly imprinted polymer microspheres based on calcium alginate hydrogel via gas jetting-dropping method.
Journal of Applied Polymer Science, 117, (4), 2331-2339, (2010)

Zhang LH

Deng QL et al., S-Ibuprofen-imprinted polymers incorporating g-methacryloxypropyl-trimethoxysilane for CEC separation of ibuprofen enantiomers.
Electrophoresis, 27, (21), 4351-4358, (2006)

Zheng C et al., Recognition of oxytocin by capillary electrochromatography with monolithic tetrapeptide-imprinted polymer used as the stationary phase.
Analytical and Bioanalytical Chemistry, 388, (5), 1137-1145, (2007)

Liu JX et al., Macroporous molecularly imprinted monolithic polymer columns for protein recognition by liquid chromatography.
Journal of Separation Science, 33, (17-18), 2757-2761, (2010)

Liu JX et al., Preparation of a new type of affinity materials combining metal coordination with molecular imprinting.
Chemical Communications, 47, (13), 3969-3971, (2011)

Zhang LJ

Zhang ML et al., Preparation and Evaluation of Core-Shell Resveratrol Molecularly Imprinted Microspheres.
Chinese Journal of Analytical Chemistry, 38, (1), 129-132, (2010)

Zhang LJ et al., Fabrication and Application of CAP-MIP-OAP Film Electrode for Chloramphenical Detection.
Chinese Journal of Applied Chemistry, 28, (3), 338-342, (2011)

Zhang LM

Wang HF et al., Molecularly Imprinted Functional Materials Based on Polysaccharides.
Progress In Chemistry, 22, (11), 2165-2172, (2010)

Wang HF et al., Study on Enzyme Mimics of Molecularly Imprinted Microgels.
Chemical Journal of Chinese Universities, 31, (12), 2488-2493, (2010)

Wang HF et al., Temperature-sensitive molecularly imprinted microgels with esterase activity.
SCIENCE CHINA Chemistry, 54, (3), 515-520, (2011)

Xin JH et al., Determination of Trace Sudan IV Residues in Foods Through Molecularly Imprinted SPE Coupled with LC.
Chromatographia, 73, (3), 235-242, (2011)

Xu ZX et al., The Biomimetic Immunoassay Based on Molecularly Imprinted Polymer: A Comprehensive Review of Recent Progress and Future Prospects.
Journal of Food Science, 76, (2), R69-R75, (2011)

Zhang LW

Cheng ZY et al., Synthesis of an enzyme-like imprinted polymer with the substrate as the template, and its catalytic properties under aqueous conditions.
Chemistry - A European Journal, 10, (14), 3555-3561, (2004)

Zhang LX

Guo ZF et al., Molecularly imprinted solid-phase extraction of matrine from radix Sophorae tonkinensis.
Analyst, 136, (14), 3016-3022, (2011)

Zhang LY

Cheng GX et al., Molecularly imprinted polymeric microspheres prepared by seed swelling and suspension polymerization.
Chinese Journal of Chromatography, 20, (2), 102-107, (2002)

Zhang LY et al., Preparation and Application of Molecularly Imprinted Polymers Microspheres.
Chinese High Technology Letters, 12, (7), 108-110+107, (2002)

Zhang LY et al., Molecular selectivity of tyrosine-imprinted polymers prepared by seed swelling and suspension polymerization.
Polymer International, 51, (8), 687-692, (2002)

Zhang LY et al., Progress in Preparation and Application of Spherical Molecularly Imprinted Polymers.
Journal of Functional Polymers, 15, (2), 214-218, (2002)

Fu C et al., Molecularly imprinted submicrometer polymeric microspheres via emulsion polymerization.
Ion Exchange and Adsorption, 19, (5), 385-392, (2003)

Zhang LY et al., Molecule selecting property of cimetidine imprinted polymeric microspheres via suspension polymerization.
Chinese Journal of Analytical Chemistry, 31, (6), 655-658, (2003)

Zhang LY et al., Tyrosine imprinted polymer beads with different functional monomers via seed swelling and suspension polymerization.
Polymer Engineering And Science, 43, (4), 965-974, (2003)

Zhang LY et al., Adsorption and regeneration properties of tyrosine-imprinted polymeric beads.
Adsorption Science & Technology, 21, (8), 775-785, (2003)

Zhang LY et al., Synthesis and characteristics of tyrosine imprinted beads via suspension polymerization.
Reactive and Functional Polymers, 56, (3), 167-173, (2003)

Cheng GX et al., The surface imprinted polystyrene beads prepared via emulsion templates.
Chinese Chemical Letters, 15, (2), 242-245, (2004)

Guo TY et al., Molecular imprinting polymers for chiral separation of amino acid derivatives.
Progress In Chemistry, 16, (4), 638-642, (2004)

Guo TY et al., Uniform-sized molecularly imprinted polymer for N-carbobenzoxy-L-tryptophan and its chromatographic properties.
Chinese Journal of Analytical Chemistry, 32, (6), 705-709, (2004)

Guo TY et al., Preparation of uniform-sized molecularly imprinted polymer microspheres using N-Cbz-L-Trp as template.
Chemical Journal of Chinese Universities, 25, (4), 762-765, (2004)

Guo TY et al., Preparation and properties of uniform-sized polymer beads imprinted with N-CBZ-L-phenylalanine.
International Journal of Polymeric Materials, 54, (8), 743-755, (2005)

Li M et al., Molecularly-imprinted microspheres for selective extraction and determination of melamine in milk and feed using gas chromatography-mass spectrometry.
Journal of Chromatography B, 878, (25), 2333-2338, (2010)

Zhang M

Ma XX et al., Binding selectivity and permeation characterization of molecularly imprinted polymer membranes with paracetamol as template.
Acta Chimica Sinica, 64, (23), 2369-2374, (2006)

Ma XX et al., Studies on binding of molecularly-imprinted polymer composite membranes to coumarin-3-carboxylic acid as template and permeable selectivity.
Chemical Journal of Chinese Universities, 27, (7), 1237-1241, (2006)

Cao XM et al., Recognition Properties of the Pipemidic Acid Imprinted Polymer.
Journal of Analytical Science, 23, (1), 61-64, (2007)

Li BL et al., Preparation and property evaluation of molecularly imprinted polymer grafted micro-spherical resin.
Acta Chimica Sinica, 65, (10), 955-961, (2007)

Shi F et al., Surface Imprinting in Layer-by-Layer Nanostructured Films.
Advanced Functional Materials, 17, (11), 1821-1827, (2007)

Zhang M et al., Permeation Characteristics of Molecularly Imprinted Polymer Membranes Synthesized by Compounds of Vanillin Series.
Chemical Journal of Chinese Universities, 28, (3), 422-426, (2007)

Zhang M et al., Coimmobilization of Dehydrogenases and Their Cofactors in Electrochemical Biosensors.
Analytical Chemistry, 79, (6), 2446-2450, (2007)

Liu HN et al., Enrofloxacin-imprinted monolithic columns synthesized using reversible addition-fragmentation chain transfer polymerization.
Journal of Separation Science, 31, (10), 1694-1701, (2008)

Su SF et al., HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique.
Talanta, 76, (5), 1141-1146, (2008)

Zhang M et al., Preparation of protein molecularly imprinted composite membrane by sol-gel coating method and its permeation mechanism.
Chemical Journal of Chinese Universities, 29, (3), 498-504, (2008)

Tang JS et al., Development and Application of Molecularly Imprinted Polymer as Solid Phase Extraction of Imidacloprid in Environmental Samples.
Journal Of Liquid Chromatography & Related Technologies, 32, (1), 59-71, (2009)

Wan FW et al., A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine.
Advanced Materials Letters, 1, (2), 164-169, (2010)

Xu WJ et al., Determination of sulfonamides in bovine milk with column-switching high performance liquid chromatography using surface imprinted silica with hydrophilic external layer as restricted access and selective extraction material.
Journal of Chromatography A, 1217, (46), 7198-7207, (2010)

Zhang M et al., Preparation and application of core-shell benzoyl peroxide imprinted sol-gel polymers.
Chemistry Bulletin, 73, (2), 160-165, (2010)

Xie YT et al., Molecularly imprinted polymer microspheres enhanced biodegradation of bisphenol A by acclimated activated sludge.
Water Research, 45, (3), 1189-1198, (2011)

Zhang ML

Zhang ML et al., On-line solid-phase extraction of ceramides from yeast with ceramide III imprinted monolith.
Journal of Chromatography A, 984, (2), 173-183, (2003)

Dong WG et al., A computational and experimental investigation of the interaction between the template molecule and the functional monomer used in the molecularly imprinted polymer.
Analytica Chimica Acta, 542, (2), 186-192, (2005)

Dong WG et al., Effect of functional monomer on molecular recognition of molecularly imprinted polymer: Quantum chemical calculation and experimental investigation.
Journal of Chemical Industry and Engineering (China), 56, (11), 2131-2136, (2005)

Ren YM et al., Synthesis and properties of magnetic Cu(II) ion imprinted composite adsorbent for selective removal of copper.
Desalination, 228, (1-3), 135-149, (2008)

Ren YM et al., Adsorption character for removal Cu(II) by magnetic Cu(II) ion imprinted composite adsorbent.
Journal of Hazardous Materials, 158, (1), 14-22, (2008)

Zhang ML et al., Preparation and Evaluation of Core-Shell Resveratrol Molecularly Imprinted Microspheres.
Chinese Journal of Analytical Chemistry, 38, (1), 129-132, (2010)

Zhang ZH et al., Microwave-assisted Heating Preparation of Core-shell Ion-imprinted Polymer and Extraction of Cr(III) from Urine.
Chemical Journal of Chinese Universities-Chinese, 31, (9), 1734-1740, (2010)

Wen QA et al., Microwave-assisted Heating for Rapid Preparation and On-line Enrichment Application of Core-shell Uridine Imprinted Polymer.
Acta Chimica Sinica, 69, (2), 209-214, (2011)

Zhang MN

Zhang MN et al., The synthesis and function research of the molecular imprinted polymer of cross-linking sulfhydryl chitosan by Pb2+ as template.
Journal of Hainan Normal University (Natural Science), 19, (3), 251-255, (2006)

Zhang MN et al., Synthesis and Adsorbability of Molecular Imprinted Polymer of Tributyltin.
Natural Science Journal of Hainan University, 25, (1), 46-50, (2007)

Zhang MR

Li YR et al., Progress of Molecularly Imprinted Monolithic Column for HPLC.
Chinese Journal of Pharmaceuticals, 38, (4), 313-317, (2007)

Zhang MS

Zhang MS et al., Preparation and Selective Permeation of Protein Molecularly Imprinted Membranes.
Acta Chimica Sinica, 67, (24), 2840-2844, (2009)

Zhang MS et al., Preparation and Selective Permeation Characterization of Molecularly Imprinted Membranes with Malachite Green as Template.
Chinese Journal of Applied Chemistry, 27, (1), 107-111, (2010)

Zhang MS et al., Preparation and characteristics of protein molecularly imprinted membranes on the surface of multiwalled carbon nanotubes.
Talanta, 81, (1-2), 162-166, (2010)

Zhang MS et al., Preparation of Hydroquinone Molecularly Imprinted Polymer Microspheres by Suspension Polymerization in Two-phase System of Ionic Liquid-based Aqueous.
Chinese Journal of Applied Chemistry, 27, (5), 518-522, (2010)

Zhang N

Zhang N et al., A new ion-imprinted silica gel sorbent for on-line selective solid-phase extraction of dysprosium(III) with detection by inductively coupled plasma-atomic emission spectrometry.
Analytica Chimica Acta, 597, (1), 12-18, (2007)

Zhang N et al., Chromium(III)-imprinted silica gel for speciation analysis of chromium in environmental water samples with ICP-MS detection.
Talanta, 75, (2), 536-543, (2008)

Zheng F et al., Mn(ii) imprinted 3-mercaptopropyltrimethoxysilane (MPTS)-silica coated capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of trace Mn(ii) in biological samples.
Journal of Analytical Atomic Spectrometry, 26, (7), 1521-1525, (2011)

Zhang NW

Zhang NW et al., Preparation of chloramphenicol succinate molecularly imprinted membrane and study of its absorption characteristic.
Acta Chimica Sinica, 66, (17), 1961-1966, (2008)

Zhang NW et al., Molecularly Imprinted Membrane-Based Sensor for the Detection of Chloramphenicol Succinate Residue in Milk.
Chinese Journal of Analytical Chemistry, 36, (10), 1380-1384, (2008)

Zhang P

Zhang P et al., Application of molecularly imprinted polymers in water quality detection.
Water & Wastewater Engineering, 32, (3), 102-107, (2006)

Zhang Q

Wang JC et al., Phenylurea herbicides-selective polymer prepared by molecular imprinting using N-(4-isopropylphenyl)-N'-butyleneurea as dummy template.
Analytica Chimica Acta, 540, (2), 307-315, (2005)

Zhang Q et al., Application of supercritical CO2 on molecular imprinting membrane for uracil recognition by phase separation.
Polymer Preprints, Japan, 54, (1), 1877-(2005)

Kobayashi T et al., Molecularly imprinted polymer membranes having selective binding and separation properties.
Polymer Preprints, Japan, 55, (2), 5032-5033, (2006)

Kobayashi T et al., Bile acid imprinting polymers prepared by covalent-ester monomer-template technique: Synthesis, characterization and fluorescence application for BA recognition.
Journal of Chemical Engineering of Japan, 40, (6), 516-522, (2007)

Zhang QC

Zhang YJ et al., Molecularly Imprinted Electrospinning Polyethersulfone Nano-Scale Fibers for the Binding and Recognition of Bisphenol A.
Separation Science And Technology, 46, (10), 1615-1620, (2011)

Zhang QJ

Guan JG et al., Impedimetric biosensors.
Journal of Bioscience and Bioengineering, 97, (4), 219-226, (2004)

Zheng YQ et al., Preparation of Tilmicosin Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 38, (1), 95-99, (2010)

Zhang QL

Tang F et al., Sample preparation for analyzing traditional Chinese medicines.
TrAC Trends in Analytical Chemistry, 28, (11), 1253-1262, (2009)

Zhang QQ

Li YC et al., Preparation and evaluation of uniform-size (-)-ephedrine-imprinted polymeric microspheres by multi-step swelling and suspension polymerization.
Analytical Sciences, 22, (10), 1355-1360, (2006)

Lin LQ et al., Preparation of molecularly imprinted polymer for sinomenine and study on its molecular recognition mechanism.
Polymer, 47, (11), 3792-3798, (2006)

Zhang QQ et al., Uracil-imprinted membrane prepared under compressed CO2 fluid.
Polymer Preprints, Japan, 55, (2, Disk1), 2PB132-(2006)

Zhang QQ et al., Porous imprinted polymer membranes prepared by phase separation in compressed liquid CO2.
Analytical and Bioanalytical Chemistry, 388, (3), 665-673, (2007)

Kobayashi T et al., Using polystyrene-co-maleic acid for molecularly imprinted membranes prepared in supercritical carbon dioxide.
Journal of Applied Polymer Science, 108, (2), 757-768, (2008)

Fu Q et al., Uniformly sized molecularly imprinted polymers for on-line concentration, purification, and measurement of nimodipine in plasma.
Journal of Applied Polymer Science, 111, (6), 2830-2836, (2009)

Zhang QQ et al., Imprinting Effect Inducing Crystallization of Uracil on Polymer Membrane Prepared in Supercritical CO2 Phase Inversion.
Journal of Chemical Engineering of Japan, 42, (1), 21-28, (2009)

Zhang QW

Li ZY et al., Chiral separation by (S)-naproxen imprinted monolithic column with mixed functional monomers.
Chinese Chemical Letters, 18, (3), 322-324, (2007)

Huang YP et al., Preparation and Characterization of a Low-Density Imprinted Monolithic Column.
Chromatographia, 70, (5), 691-698, (2009)

Huang YP et al., Characterization of Convection for Molecularly Imprinted Monolith.
Chromatographia, 71, (7), 559-569, (2010)

Zhang QY

Meng ZH et al., Application of Molecularly Imprinted Solid Phase Extraction in the Assay of Environmental Samples.
Chinese Journal of Chromatography, 24, (6), 551-554, (2006)

Zhang QY et al., Absorption of TNT by Molecularly Imprinted Polymer.
Chinese Journal of Explosives & Propellants, 30, (1), 64-66, (2007)

Zhang QY et al., Adsorption of TNT using beaded molecularly-imprinted polymer.
Chinese Journal of Energetic Materials, 17, (2), 249-250, (2009)

Zhang R

Zhu L et al., Progress of metal-ion imprinting technology.
Chemistry Bulletin, 73, (4), 326-331, (2010)

Zhang RF

Pan JY et al., Ion-imprinted interpenetrating polymer networks for preconcentration and determination of Cd(II) by flame atomic absorption spectrometry.
Chemia Analityczna, 51, (5), 701-713, (2006)

Pan JY et al., A novel Pb(II)-imprinted IPN for selective preconcentration of lead from water and sediments.
International Journal of Environmental Analytical Chemistry, 86, (11), 855-865, (2006)

Wang S et al., Selective solid-phase extraction of trace copper ions in aqueous solution with a Cu(II)-imprinted interpenetrating polymer network gel prepared by ionic imprinted polymer (IIP) technique.
Microchimica Acta, 154, (1-2), 73-80, (2006)

Zhang RL

Jiang M et al., Selective molecularly imprinted stationary phases for Bisphenol A analysis prepared by modified precipitation polymerization.
Journal of Separation Science, 32, (19), 3265-3273A, (2009)

Zhang RM

Liang RN et al., Potentiometric sensor based on molecularly imprinted polymer for determination of melamine in milk.
Sensors and Actuators B: Chemical, 141, (2), 544-550, (2009)

Liang RN et al., Potentiometric Sensing of Neutral Species Based on a Uniform-Sized Molecularly Imprinted Polymer as a Receptor.
Angewandte Chemie International Edition, 49, (14), 2556-2559, (2010)

Liang RN et al., Potentiometric Sensor Based on an Ion-Imprinted Polymer for Determination of Copper.
Sensor Letters, 9, (2), 557-562, (2011)

Zhang RW

Zhang RW et al., Proceeding, Selective recognition of bile acids by molecular imprints,
In: IEEE Sensors 2007 Proceedings, 1048-1051, (2007)

Zhang S

Xu XL et al., A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.
Talanta, 78, (1), 26-32, (2009)

Xue XH et al., Specific recognition of staphylococcus aureus by staphylococcus aureus protein A-imprinted polymers.
Reactive and Functional Polymers, 69, (3), 159-164, (2009)

Zhang SC

Zhang ZY et al., Recent developments and applications of chemiluminescence sensors.
Analytica Chimica Acta, 541, (1-2), 37-46, (2005)

Zhang SJ

Huang YP et al., Preparation and Characterization of a Low-Density Imprinted Monolithic Column.
Chromatographia, 70, (5), 691-698, (2009)

Zhang SJ et al., On-Line Preconcentration and Analysis of Metribuzin Residues in Corn Fields by Use of a Molecularly Imprinted Polymer.
Chromatographia, 69, (7), 615-619, (2009)

Huang YP et al., Characterization of Convection for Molecularly Imprinted Monolith.
Chromatographia, 71, (7), 559-569, (2010)

Zhang SJ et al., Via protoporphyrin to the synthesis of levofloxacin-imprinted polymer.
Polymers for Advanced Technologies, 22, (2), 286-292, (2011)

Zhang SL

Zhang SL et al., Book chapter, Bioreactors and Bioseparation,
In: Biotechnology in China II, Tsao GT, Ouyang PK, Chen JA (Eds.) Springer: Heidelberg, 105-150, (2010)

Zhang SQ

Yang HH et al., Molecularly imprinted sol-gel nanotubes membrane for biochemical separations.
Journal of the American Chemical Society, 126, (13), 4054-4055, (2004)

Zhang SQ et al., Preparation of molecular imprinting sol-gel nanotubes membrane and its application to biochemical separations.
Chemical Journal of Chinese Universities, 25, (6), 1028-1030, (2004)

Yang HH et al., Surface molecularly imprinted nanowires for biorecognition.
Journal of the American Chemical Society, 127, (5), 1378-1379, (2005)

Zhang SS

Li F et al., One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol-gel process.
Journal of Chromatography A, 1129, (2), 223-230, (2006)

Li F et al., Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic-inorganic hybridization combined with sucrose and polyethylene glycol imprinting.
Analytica Chimica Acta, 585, (2), 211-218, (2007)

Li F et al., An ion-imprinted silica-supported organic-inorganic hybrid sorbent prepared by a surface imprinting technique combined with a polysaccharide incorporated sol-gel process for selective separation of cadmium(II) from aqueous solution.
Talanta, 71, (4), 1487-1493, (2007)

Li F et al., Molecularly imprinted polymer grafted on polysaccharide microsphere surface by the sol-gel process for protein recognition.
Talanta, 74, (5), 1247-1255, (2008)

Zhang SW

Zhang SW et al., Molecularly imprinted monolith in-tube solid-phase microextraction coupled with HPLC/UV detection for determination of 8-hydroxy-2'-deoxyguanosine in urine.
Analytical and Bioanalytical Chemistry, 395, (2), 479-487, (2009)

Zhang SW et al., Determination of urinary 8-hydroxy-2'-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction.
Chinese Chemical Letters, 21, (1), 85-88, (2010)

Zhang SZ

Zhang SZ et al., Selective adsorption of D- and L-phenylalanine on molecularly-imprinted polymerized organogels formed using polymerizable gelator N-octadecyl maleamic acid.
Journal of Separation Science, 31, (21), 3782-3787, (2008)

Xiong Y et al., Selective Adsorption of D- and L-Phenylalanine on the Imprinted Polymerized Organogel Membranes.
Acta Chimica Sinica, 67, (5), 442-446, (2009)

Zhang SZ et al., Cholesterol Imprinted Polymerized Organogel Formed by Polymerizable Gelator and Adsorption Ability.
Acta Polymerica Sinica, (3), 244-248, (2009)

Zhang SZ et al., Preparation of cholesterol imprinted polymerized organogel and selectivity adsorption ability.
Acta Polymerica Sinica, (4), 390-394, (2011)

Zhang SZ et al., Preparation methods and selective adsorption capabilities of cholesterol molecularly imprinted polymers.
Chemistry Bulletin, 74, (2), 137-143, (2011)

Zhang T

Zhuang XL et al., Selective on-line extraction of trans-resveratrol and emodin from Polygonum cuspidatum using molecularly imprinted polymer.
Journal of Chromatographic Science, 46, (8), 739-742, (2008)

Gai QQ et al., The preparation of bovine serum albumin surface-imprinted superparamagnetic polymer with the assistance of basic functional monomer and its application for protein separation.
Journal of Chromatography A, 1218, (22), 3489-3495, (2011)

Zhang TL

Zhang TL et al., Study on the molecular recognition properties of 4-hydroxybenzoic acid-imprinted polymer and salicylic acid-imprinted polymer.
Acta Chimica Sinica, 59, (10), 1623-1627, (2001)

Zhang TL et al., Influence of intramolecular hydrogen bond of templates on molecular recognition of molecularly imprinted polymers.
Analytica Chimica Acta, 450, (1-2), 53-61, (2001)

Zhang TL et al., Molecular recognition properties of salicylic acid-imprinted polymers.
Chromatographia, 55, (7-8), 447-451, (2002)

Zhang TL et al., Molecular Recognition Properties of p-Phenylenediamine-Imprinted Polymers.
Chinese Journal of Analytical Chemistry, 38, (1), 33-38, (2010)

Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)

Zhang TL et al., Influence of the Number and Relative Position of the Interacting Groups in Template Molecule on Molecular Imprinting Effect.
Chemical Journal of Chinese Universities, 31, (6), 1126-1130, (2010)

Zhang W

Zhang W et al., Synthesis of salicylic acid imprinted polymer microspheres via emulsion polymerization.
Journal of Chemical Industry and Engineering (China), 59, (6), 1551-1555, (2008)

Qin L et al., Macroporous Thermosensitive Imprinted Hydrogel for Recognition of Protein by Metal Coordinate Interaction.
Analytical Chemistry, 81, (17), 7206-7216, (2009)

Qin L et al., Surface-modified polystyrene beads as photografting imprinted polymer matrix for chromatographic separation of proteins.
Journal of Chromatography A, 1216, (5), 807-814, (2009)

Zhang W et al., Novel surface modified molecularly imprinted polymer using acryloyl-[beta]-cyclodextrin and acrylamide as monomers for selective recognition of lysozyme in aqueous solution.
Journal of Chromatography A, 1216, (21), 4560-4567, (2009)

Zhang W et al., Protein imprinted polymer using acryloyl-[beta]-cyclodextrin and acrylamide as monomers.
Applied Surface Science, 256, (9), 3000-3005, (2010)

Zhang W et al., Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c.
Biosensors and Bioelectronics, 26, (5), 2553-2558, (2011)

Zhang WB

Ping GC et al., Preparation and application of monolithic columns.
Chinese Journal of Analytical Chemistry, 29, (12), 1464-1469, (2001)

Deng QL et al., S-Ibuprofen-imprinted polymers incorporating g-methacryloxypropyl-trimethoxysilane for CEC separation of ibuprofen enantiomers.
Electrophoresis, 27, (21), 4351-4358, (2006)

Su LQ et al., Preparation and chromatographic study of salicylic acid imprinted polymers in aqueous media.
Chemistry Bulletin, 69, (3), 216-219, (2006)

Su LQ et al., Studies on the synthesis and properties of malachite green imprinted polymer.
Chinese Chemical Letters, 18, (2), 229-232, (2007)

Su LQ et al., Synthesis and Characterization of 2-(Methacryloylamino) ethyoxyl-2-methacrylate Ethandiol Ester Matrix Molecular Imprinting Chiral Separation Medium.
Chinese Journal of Analytical Chemistry, 36, (12), 1732-1734, (2008)

Zhang WY

Zhang WY et al., Advances in preparation of surface molecularly imprinted materials.
Modern Chemical Industry, 25, (12), 20-23, (2005)

Li Q et al., Preparation and Properties of Salicylic Acid-Imprinted Polymers from Emulsions.
Macromolecular Symposia, 261, (1), 91-96, (2008)

Li Q et al., Synthesis and properties of salicylic acid surface molecularly imprinted polymers from aqueous emulsions.
Polymeric Materials Science and Engineering, 26, (8), (2010)

Zhang X

Conrad PGI et al., Functional molecularly imprinted polymer microstructures fabricated using microstereolithography.
Advanced Materials, 15, (18), 1541-1544, (2003)

Chen H et al., To Construct "Ion Traps" for Enhancing the Permselectivity and Permeability of Polyelectrolyte Multilayer Films.
Macromolecules, 40, (3), 653-660, (2007)

Shi F et al., Surface Imprinting in Layer-by-Layer Nanostructured Films.
Advanced Functional Materials, 17, (11), 1821-1827, (2007)

Zhang X, Surface molecular engineering of polymer multilayer films.
Acta Polymerica Sinica, (10), 905-912, (2007)

Luo W et al., Synthesis of surface molecularly imprinted silica micro-particles in aqueous solution and the usage for selective off-line solid-phase extraction of 2, 4-dinitrophenol from water matrixes.
Analytica Chimica Acta, 618, (2), 147-156, (2008)

Niu J et al., Surface-Imprinted Nanostructured Layer-by-Layer Film for Molecular Recognition of Theophylline Derivatives.
Langmuir, 24, (20), 11988-11994, (2008)

Su L et al., Synthesis and evaluation of Armillarisin A -imprinted polymer on silica surface.
Chemistry Bulletin, 72, (8), 749-753, (2009)

Tan F et al., Preparation and evaluation of molecularly imprinted solid-phase microextraction fibers for selective extraction of bisphenol A in complex samples.
Journal of Chromatography A, 1216, (30), 5647-5654, (2009)

Gauczinski J et al., Mechanism of Surface Molecular Imprinting in Polyelectrolyte Multilayers.
Langmuir, 26, (12), 10122-10128, (2010)

Liu ZH et al., Cation-Selective Microcontact Printing Based on Surface-Molecular-Imprinted Layer-by-Layer Films.
Advanced Materials, 22, (24), 2689-2693, (2010)

Hu XH et al., Hydrogel Contact Lens for Extended Delivery of Ophthalmic Drugs.
International Journal of Polymer Science, 2011, Article ID 814163-(2011)

Shi Y et al., Selective determination of trace 17[beta]-estradiol in dairy and meat samples by molecularly imprinted solid-phase extraction and HPLC.
Food Chemistry, 126, (4), 1916-1925, (2011)

Zhang X et al., Preparation of molecularly imprinted microspheres and their recognition properties for punicalagin.
Journal of Beijing University of Chemical Technology (Natural Science Edition), 38, (1), 72-76, (2011)

Zhang XF

Zhang XF et al., Protective effects of ion-imprinted chitooligosaccharides as uranium-specific chelating agents against the cytotoxicity of depleted uranium in human kidney cells.
Toxicology, 286, (1-3), 75-84, (2011)

Zhang XH

Yang KG et al., Molecularly imprinted polyethersulfone microspheres for the binding and recognition of bisphenol A.
Analytica Chimica Acta, 546, (1), 30-36, (2005)

Chen ZQ et al., Progress on construction and research of sensing films of molecularly imprinted electrochemical sensors.
Journal of Instrumental Analysis, 29, (1), 97-104, (2010)

Zhang XJ

Li CX et al., Strontium(II) ion surface-imprinted polymers supported by potassium tetratitanate whiskers: Synthesis, characterization and adsorption behaviours.
Adsorption Science & Technology, 27, (9), 845-859, (2009)

Xu PP et al., Molecularly-imprinted Material for Dibenzothiophene Recognition Prepared by Surface Imprinting Methods.
Adsorption Science & Technology, 27, (10), 975-987, (2009)

Xu PP et al., A surface-imprinted polymer for removing dibenzothiophene from gasoline.
Microchimica Acta, 171, (3), 441-449, (2010)

Zhang XJ et al., A Ce3+-imprinted functionalized potassium tetratitanate whisker sorbent prepared by surface molecularly imprinting technique for selective separation and determination of Ce3+.
Microchimica Acta, 169, (3), 289-296, (2010)

Zhang ZL et al., Analysis of Properties of Cadmium Adsorption onto Whisker Surface Ion-Imprinted Polymer by Inductively Coupled Plasma Atomic Emission Spectrometry.
Spectroscopy and Spectral Analysis, 30, (3), 792-796, (2010)

Zhang XL

Gao MJ et al., Study on 2, 4-D Molecularly Imprinted Polymer.
Analysis and Testing Technology and Instruments, 7, (4), 210-214, (2001)

Ying TL et al., Highly selective technique-molecular imprinting.
Chinese Journal of Analytical Chemistry, 29, (1), 99-102, (2001)

Wu ZY et al., Sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Journal of Hunan University Natural Sciences, 32, (3), 10-14, (2005)

Wu ZY et al., A sensitive nicotine sensor based on molecularly imprinted electropolymer of o-aminophenol.
Frontiers of Chemistry in China, 1, (2), 183-187, (2006)

Yu BY et al., Effect of the template molecules and nonsolvent additives on the recognition property of molecular imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 108, (6), 3859-3866, (2008)

Zhang XM

Chen W et al., The specificity of a chlorphenamine-imprinted polymer and its application.
Talanta, 55, (1), 29-34, (2001)

Huang JD et al., Development of molecularly imprinted electrochemical sensor with titanium oxide and gold nanomaterials enhanced technique for determination of 4-nonylphenol.
Sensors and Actuators B: Chemical, 152, (2), 292-298, (2011)

Huang JD et al., A molecularly imprinted electrochemical sensor based on multiwalled carbon nanotube-gold nanoparticle composites and chitosan for the detection of tyramine.
Food Research International, 44, (1), 276-281, (2011)

Huang JD et al., Electrochemical sensor based on imprinted sol-gel and nanomaterials for sensitive determination of bisphenol A.
Food Control, 22, (5), 786-791, (2011)

Zhang XN

Zhang XP

Chen LG et al., Fast and Selective Extraction of Sulfonamides from Honey Based on Magnetic Molecularly Imprinted Polymer.
Journal of Agricultural and Food Chemistry, 57, (21), 10073-10080, (2009)

Zhang XR

Zhang ZY et al., Recent developments and applications of chemiluminescence sensors.
Analytica Chimica Acta, 541, (1-2), 37-46, (2005)

Zhang XW

Dong XC et al., Synthesis and application of molecularly imprinted polymer on selective solid-phase extraction for the determination of monosulfuron residue in soil.
Journal of Chromatography A, 1057, (1-2), 13-19, (2004)

Wang N et al., Synthesis and the Recognition Properties of the Monosulfuron Imprinted Polymer.
Journal of Instrumental Analysis, 23, (4), 13-17, (2004)

Liu YC et al., Synthesis of uranyl sulphate imprinted ion exchange resin and its recognition characteristics.
Journal of Chemical Engineering of Chinese Universities, 20, (4), 510-514, (2006)

Liu YC et al., Comparison between two commercial uranium resins and a uranyl sulphate imprinted resin based on self-assembling MIT.
Frontiers of Chemical Engineering in China, 1, (4), 327-331, (2007)

Zhang XX

Zhao MP et al., Preparation and the recognition property of molecular imprinted polymer of bisphenol A.
Chemical Journal of Chinese Universities, 24, (7), 1204-1206, (2003)

Guo ZF et al., Molecularly imprinted solid-phase extraction of matrine from radix Sophorae tonkinensis.
Analyst, 136, (14), 3016-3022, (2011)

Zhang Y

Liu XY et al., Fabrication of temperature-sensitive imprinted polymer hydrogel.
Macromolecular Bioscience, 4, (4), 412-415, (2004)

Song WW et al., Preparation of Molecularly Imprinted Film of Chloramphenicol and its Electrochemical Characteristics.
Journal of Shanghai Jiaotong University(Agricultural Science), 24, (6), 499-502, (2006)

Zhang Y et al., Advances in Drug Delivery System Based on Molecularly Imprinted Polymers.
Chinese Pharmaceutical Journal, 41, (21), 1605-1608, (2006)

Guo YS et al., Study on molecular recognition of molecularly imprinted polymers with anticholinergic drugs as templates.
Chinese Pharmaceutical Journal, 42, (12), (2007)

Guo YS et al., Liquid chromatographic behavior of molecularly imprinted polymers with anticholinergic drugs as template.
Pharmaceutical Care and Research, 7, (4), 249-252, (2007)

Wang S et al., Synthesis and Characterization of a Molecularly Imprinted Silica Gel Sorbent for the On-Line Determination of Trace Sudan I in Chilli Powder through High-Performance Liquid Chromatography.
Journal of Agricultural and Food Chemistry, 55, (10), 3869-3876, (2007)

He JX et al., Molecularly Imprinted Polymer Online Solid-Phase Extraction Coupled with High-Performance Liquid Chromatography-UV for the Determination of Three Sulfonamides in Pork and Chicken.
Journal of Agricultural and Food Chemistry, 56, (9), 2919-2925, (2008)

Wang S et al., Separation and determination of estrone in environmental and drinking water using molecularly imprinted solid phase extraction coupled with HPLC.
Journal of Separation Science, 31, (6-7), 1181-1188, (2008)

Xu ZX et al., Advances in molecularly imprinted sorbent immunoassay and its application.
Modern Chemical Industry, 28, (4), 32-35, (2008)

Zhang Y et al., Preparation and characterization of parathion sensor based on molecularly imprinted polymer.
Environmental Science, 29, (4), 1072-1076, (2008)

Hu YL et al., Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system.
Talanta, 79, (3), 576-582, (2009)

Pan GQ et al., Preparation of molecularly imprinted polymer microspheres via reversible addition-fragmentation chain transfer precipitation polymerization.
Polymer, 50, (13), 2819-2825, (2009)

Wang S et al., Development of a Biomimetic Enzyme-Linked Immunosorbent Assay Method for the Determination of Estrone in Environmental Water using Novel Molecularly Imprinted Films of Controlled Thickness as Artificial Antibodies.
Journal of Agricultural and Food Chemistry, 57, (11), 4528-4534, (2009)

Zhang Y et al., Microwave Heating in Preparation of Magnetic Molecularly Imprinted Polymer Beads for Trace Triazines Analysis in Complicated Samples.
Analytical Chemistry, 81, (3), 967-976, (2009)

Zhang YQ et al., Preparation and Characterization of Imprinted Porous Materials with High Selectivity for Luteolin.
Chemical Engineering & Technology, 32, (10), 1512-1519, (2009)

Yang WH et al., Preparation and Application of Core-Shell Magnetic Molecularly Imprinted Polymer Microspheres.
Progress In Chemistry, 22, (9), 1819-1825, (2010)

Zhang Y et al., Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and [beta]-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues.
Journal of Chromatography A, 1217, (47), 7337-7344, (2010)

Zu BY et al., Preparation of molecularly imprinted polymers via atom transfer radical "bulk" polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (3), 532-541, (2010)

Fang LJ et al., Azobenzene-containing molecularly imprinted polymer microspheres with photoresponsive template binding properties.
Journal of Materials Chemistry, 21, (7), 2320-2329, (2011)

Hu YL et al., Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.
Analytical and Bioanalytical Chemistry, 399, (10), 3367-3374, (2011)

Li ZC et al., Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol-gel process for selective removal of cadmium(II) from aqueous solution.
Chemical Engineering Journal, 171, (2), 703-710, (2011)

Zhang YA

Shiigi H et al., Molecularly imprinted overoxidized polypyrrole colloids: Promising materials for molecular recognition.
Microchimica Acta, 143, (2-3), 155-162, (2003)

Zhang YB

Jiang M et al., Preparation of Mono-disperse Bisphenol A Imprinted Polymer Microspheres and Their Chromatographic Properties.
Chinese Journal of Analytical Chemistry, 36, (8), 1089-1092, (2008)

Yu CY et al., Separation of Phthalocyanine-like Substances from Humic Acids Using a Molecular Imprinting Method and Their Photochemical Activity under Simulated Sunlight Irradiation.
Journal of Agricultural and Food Chemistry, 57, (15), 6927-6931, (2009)

Yu CY et al., Photochemical Effect of Humic Acid Components Separated Using Molecular Imprinting Method Applying Porphyrin-like Substances as Templates in Aqueous Solution.
Environmental Science & Technology, 44, (15), 5812-5817, (2010)

Zhang YF

Zhao JC et al., Synthesis of Zn(II) ion-imprinted solid-phase extraction material and its analytical application.
Analytica Chimica Acta, 603, (1), 87-92, (2007)

Zhang YG

Zhang YG et al., Importance of Functional Monomer Dimerization in the Molecular Imprinting Process.
Macromolecules, 43, (15), 6284-6294, (2010)

Zhang YG et al., Suppression of background sites in molecularly imprinted polymers via urea-urea monomer aggregation.
Organic & Biomolecular Chemistry, 9, (1), 120-126, (2011)

Zhang YH

Zhang YH et al., Molecular design and molecular recognition of fluorescent receptors.
Analytical Lab, 21, (5), 93-99, (2002)

Yin JF et al., Molecular recognition in in-situ nateglinide imprinted chiral stationary phase.
Acta Chimica Sinica, 62, (19), 1922-1926, (2004)

Zhang YH et al., Synthesis of molecularly imprinted polymer with 7-chloroethyl-theophylline-immobilized silica gel as template and its molecular recognition function.
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 60, (1-2), 241-244, (2004)

Pang XS et al., Bovine serum albumin-imprinted polyacrylamide gel beads prepared via inverse-phase seed suspension polymerization.
Analytica Chimica Acta, 550, (1-2), 13-17, (2005)

Pang XS et al., Soft-wet polyacrylamide gel beads with the imprinting of bovine serum albumin.
Reactive and Functional Polymers, 66, (10), 1182-1188, (2006)

Yang GL et al., Synthesis and Evaluation of Molecularly Imprinted Polymer of Paclobutrazol.
Journal of Hebei University (Natural Science Edition), 26, (3), 262-265, (2006)

Hu XB et al., Ultrasensitive Specific Stimulant Assay Based on Molecularly Imprinted Photonic Hydrogels.
Advanced Functional Materials, 18, (4), 575-583, (2008)

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone (Translated from: Journal of Tianjin University, 2007, 40(4): 411-415).
Frontiers of Chemistry in China, 3, (3), 320-324, (2008)

Zhang YQ et al., Study on the build of channels in accurate separation membrane and its selective mechanism.
Journal of Membrane Science, 339, (1-2), 100-108, (2009)

Zhang YQ et al., Study on preparation of composite membrane with molecular recognizing property and its selective permeance mechanism.
Separation And Purification Technology, 65, (2), 130-136, (2009)

Zhang YH et al., Adsorptive characterization of the 4-aminoazobenzene imprinted polymer and its application in detection of trace substance.
Analytical Lab, 29, (4), 103-106, (2010)

Zhang YQ et al., Study on composite membranes with high selective permeance properties.
Journal of Membrane Science, 346, (2), 318-326, (2010)

Zhang YJ

Wang DS et al., Molecularly imprinted polyethersulfone microfibers for the binding and recognition of bisphenol A.
Journal of Applied Polymer Science, 114, (6), 4036-4041, (2009)

Dai CM et al., Performance evaluation and application of molecularly imprinted polymer for separation of carbamazepine in aqueous solution.
Journal of Hazardous Materials, 184, (1-3), 156-163, (2010)

Dai CM et al., Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres.
Environmental Pollution, 159, (6), 1660-1666, (2011)

Zhang YK

Ping GC et al., Preparation and application of monolithic columns.
Chinese Journal of Analytical Chemistry, 29, (12), 1464-1469, (2001)

Yan C et al., Capillary electrochromatography: Advances in instrumentation and stationary phases.
Abstracts of Papers of the American Chemical Society, 227, (ANYL), 254-254, (2004)

Ma XX et al., Permeation characteristics of cobalt(II)-complex molecularly imprinted polymer membranes.
Acta Chimica Sinica, 63, (18), 1681-1685, (2005)

Deng QL et al., S-Ibuprofen-imprinted polymers incorporating g-methacryloxypropyl-trimethoxysilane for CEC separation of ibuprofen enantiomers.
Electrophoresis, 27, (21), 4351-4358, (2006)

Li L et al., Solid-phase extraction of active component of Chinese traditional medicine fisetin by using molecularly imprinted polymers.
Chemical Journal of Chinese Universities, 27, (4), 608-611, (2006)

Ma XX et al., Binding selectivity and permeation characterization of molecularly imprinted polymer membranes with paracetamol as template.
Acta Chimica Sinica, 64, (23), 2369-2374, (2006)

Zheng C et al., Separation and Recognition of Biomacromolecule by Molecular Imprinting Technique.
Chinese Journal of Chromatography, 24, (3), 309-314, (2006)

Wang HF et al., Investigations of the interaction between 3-aminophenylboronic acid and bovine serum albumin using fluorimetry.
Acta Chimica Sinica, 65, (1), 43-48, (2007)

Zhang M et al., Permeation Characteristics of Molecularly Imprinted Polymer Membranes Synthesized by Compounds of Vanillin Series.
Chemical Journal of Chinese Universities, 28, (3), 422-426, (2007)

Zheng C et al., Thermodynamic studies on 4-hydroxybenzoic acid-imprinted polymer monolith by frontal analysis.
Chemical Journal of Chinese Universities, 28, (8), 1443-1448, (2007)

Zhou X et al., Recent Advances in the Study of Protein Imprinting.
Separation & Purification Reviews, 36, (4), 257-283, (2007)

Gai QQ et al., Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method.
Frontiers of Chemistry in China, 3, (4), 370-377, (2008)

Gai QQ et al., Preparation of bovine hemoglobin-imprinted polymer beads via photografting surface-modified method.
Chemical Journal of Chinese Universities, 29, (1), 64-70, (2008)

Gai QQ et al., Molecular imprinting technology for protein recognition.
Progress In Chemistry, 20, (6), 957-968, (2008)

Liu QY et al., Matrix molecularly imprinted polymer for enriching lysozyme in protein samples.
Chemical Journal of Chinese Universities, 29, (3), 505-509, (2008)

Liu QY et al., Study of recognition property of molecularly imprinted bovine hemoglobin on surface-modified silica gel.
Acta Chimica Sinica, 66, (1), 56-62, (2008)

Qin L et al., Molecularly imprinted polymer prepared with bonded [beta]-cyclodextrin and acrylamide on functionalized silica gel for selective recognition of tryptophan in aqueous media.
Journal of Chromatography A, 1187, (1-2), 94-102, (2008)

Wang HF et al., Study of bovine serum albumin imprinted polymer fabricated with 3-aminophenylboronic acid as functional monomer on chitosan particles.
Chemical Journal of Chinese Universities, 29, (4), 726-730, (2008)

Wang HF et al., m-Aminophenylboronic acid as a functional monomer for fabricating molecularly imprinted polymer for the recognition of bovine serum albumin.
Reactive and Functional Polymers, 68, (9), 1291-1296, (2008)

Zheng C et al., Mechanism of Molecular Recognition on Tetrapetide-imprinted Monolith by Capillary Electrochromatography.
Chinese Journal of Chemistry, 26, (10), 1857-1862, (2008)

Li H et al., Application of Molecularly Imprinted Column for Separation and Purification of Bioactive Compound from Cirsium segetum Bunge.
Separation Science And Technology, 44, (2), 370-385, (2009)

Li L et al., Preparation of Core-shell Magnetic Molecularly Imprinted Polymer Nanoparticles for Recognition of Bovine Hemoglobin.
Chemistry - An Asian Journal, 4, (2), 286-293, (2009)

Li L et al., Preparation of novel bovine hemoglobin surface-imprinted polystyrene nanoparticles with magnetic susceptibility.
Science in China Series B: Chemistry, 52, (9), 1402-1411, (2009)

Lin Z et al., Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography.
Journal of Chromatography A, 1216, (49), 8612-8622, (2009)

Lin Z et al., Organic-inorganic hybrid silica as supporting matrices for selective recognition of bovine hemoglobin via covalent immobilization.
Journal of Separation Science, 32, (22), 3980-3987, (2009)

Liu QY et al., Studies on chitosan coated on silica for imprinting bovine hemoglobin.
Chemical Journal of Chinese Universities, 30, (4), 691-696, (2009)

Qin L et al., Macroporous Thermosensitive Imprinted Hydrogel for Recognition of Protein by Metal Coordinate Interaction.
Analytical Chemistry, 81, (17), 7206-7216, (2009)

Qin L et al., Surface-modified polystyrene beads as photografting imprinted polymer matrix for chromatographic separation of proteins.
Journal of Chromatography A, 1216, (5), 807-814, (2009)

Sun XL et al., Determination of tetracyclines in food samples by molecularly imprinted monolithic column coupling with high performance liquid chromatography.
Talanta, 79, (3), 926-934, (2009)

Wang HF et al., BSA-imprinted synthetic receptor for reversible template recognition.
Journal of Separation Science, 32, (11), 1981-1986, (2009)

Wang X et al., A molecularly imprinted polymer-coated nanocomposite of magnetic nanoparticles for estrone recognition.
Talanta, 78, (2), 327-332, (2009)

Zhou X et al., Optimum Conditions of Separation Selectivity Based on Molecularly Imprinted Polymers of Bovine Serum Albumin Formed on Surface of Aminosilica.
Chinese Journal of Analytical Chemistry, 37, (2), 174-180, (2009)

Gai QQ et al., Superparamagnetic lysozyme surface-imprinted polymer prepared by atom transfer radical polymerization and its application for protein separation.
Journal of Chromatography A, 1217, (31), 5035-5042, (2010)

Gai QQ et al., The Preparation of BHb-Molecularly Imprinted Gel Polymers and Its Selectivity Comparison to BHb and BSA.
Separation Science And Technology, 45, (16), 2394-2399, (2010)

Gao RX et al., Selective extraction of sulfonamides from food by use of silica-coated molecularly imprinted polymer nanospheres.
Analytical and Bioanalytical Chemistry, 398, (1), 451-461, (2010)

Gao RX et al., Synthesis and evaluation of molecularly imprinted core-shell carbon nanotubes for the determination of triclosan in environmental water samples.
Journal of Chromatography A, 1217, (52), 8095-8102, (2010)

Liu JX et al., Macroporous molecularly imprinted monolithic polymer columns for protein recognition by liquid chromatography.
Journal of Separation Science, 33, (17-18), 2757-2761, (2010)

Sun XL et al., Room temperature ionic liquid-mediated molecularly imprinted polymer monolith for the selective recognition of quinolones in pork samples.
Journal of Separation Science, 33, (23-24), 3786-3793, (2010)

Zhang W et al., Protein imprinted polymer using acryloyl-[beta]-cyclodextrin and acrylamide as monomers.
Applied Surface Science, 256, (9), 3000-3005, (2010)

Gao RX et al., Preparation and characterisation of core-shell CNTs@MIPs nanocomposites and selective removal of estrone from water samples.
Talanta, 83, (3), 757-764, (2011)

Liu JX et al., Preparation of a new type of affinity materials combining metal coordination with molecular imprinting.
Chemical Communications, 47, (13), 3969-3971, (2011)

Qin L et al., Molecularly imprinted beads with double thermosensitive gates for selective recognition of proteins.
Analytical and Bioanalytical Chemistry, 399, (10), 3375-3385, (2011)

Qin L et al., A Thermosensitive Monolithic Column as an Artificial Antibody for the On-line Selective Separation of the Protein.
Chemistry - A European Journal, 17, (5), 1696-1704, (2011)

Zhang W et al., Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c.
Biosensors and Bioelectronics, 26, (5), 2553-2558, (2011)

Zhang YL

Dai CM et al., Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres.
Environmental Pollution, 159, (6), 1660-1666, (2011)

Zhang YM

Hu TP et al., Molecular recognition and adsorption performance of benzothiophene imprinted polymer on silica gel surface.
Journal of Fuel Chemistry and Technology, 38, (6), 722-729, (2010)

Zhang YP

Zhang YP et al., Rapid preparation of molecularly imprinted capillary monolithic columns by microwave polymerization.
Chemical Journal of Chinese Universities, 28, (9), 1654-1656, (2007)

Zhang YP et al., Novel preparation of monolithic imprinted columns for electrochromatographic separation by photopolymerization.
Chinese Chemical Letters, 18, (6), 734-737, (2007)

Zhang YQ

Zhang YQ et al., Synthesis of silica adsorbent and its selective separation for flavone.
Journal of Tianjin University Science and Technology, 40, (4), 411-415, (2007)

Zhang YQ et al., Study of the Preparation of Flavone Imprinted Silica Microspheres and Their Molecular Recognition Function.
Chemical Engineering & Technology, 30, (8), 1014-1019, (2007)

Zhang YQ et al., Study on the build of channels in accurate separation membrane and its selective mechanism.
Journal of Membrane Science, 339, (1-2), 100-108, (2009)

Zhang YQ et al., Preparation and Characterization of Imprinted Porous Materials with High Selectivity for Luteolin.
Chemical Engineering & Technology, 32, (10), 1512-1519, (2009)

Zhang YQ et al., Study on composite membranes with high selective permeance properties.
Journal of Membrane Science, 346, (2), 318-326, (2010)

Zhang YQ et al., Development of a molecularly imprinted membrane for selective separation of flavonoids.
Separation And Purification Technology, 76, (3), 337-344, (2011)

Zhang YW

Qiu JH et al., Application of surface-initiated atom transfer radical polymerization in membranes technology.
Polymeric Materials Science and Engineering, 26, (7), 167-174, (2010)

Zhang YY

Peng H et al., Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine.
Analytica Chimica Acta, 423, (2), 221-228, (2000)

Li CY et al., Electrochemical sensor for the determination of parathion based on p-tert-butylcalix[6]arene-1, 4-crown-4 sol-gel film and its characterization by electrochemical methods.
Sensors and Actuators B: Chemical, 107, (1), 411-417, (2005)

Zhang YZ

Zhang YZ et al., Urea and thiourea based multi-armed functional monomers for molecular recognition and imprinting.
Polymer Preprints, 48, (1), 543-544, (2007)

Zhang Z

Kan XW et al., Molecularly imprinted polymers microsphere prepared by precipitation polymerization for hydroquinone recognition.
Talanta, 75, (1), 22-26, (2008)

Zhang Z et al., Molecular imprinted polymer-based chemiluminescence imaging sensor.
Luminescence, 23, (2), 109-110, (2008)

Liu L et al., Synthesis and evaluation of core-shell molecularly imprinted polymers for the selective recognition of magnolol.
Chemistry Bulletin, 72, (10), 907-911, (2009)

Zhang M et al., Preparation and application of core-shell benzoyl peroxide imprinted sol-gel polymers.
Chemistry Bulletin, 73, (2), 160-165, (2010)

Zhang ZB

Zhang ZB et al., Selective removal of estrogenic compounds by molecular imprinted polymer (MIP).
Water Research, 42, (15), 4101-4108, (2008)

Zhang ZB et al., Effect of Environmental Factors on Estrogenic Compounds Adsorption by MIP.
Water, Air, & Soil Pollution, 210, (1), 255-264, (2010)

Zhang ZC

Yan WY et al., Recognition mechanism of 4-aminopyridine molecularly imprinted polymer-based monolithic capillary column in electrochromatography.
Analytical Lab, 22, (2), 5-7, (2003)

Yan WY et al., Preparation of 4-aminopyridine imprinted polymer-based monolithic capillary column and evaluation of electrochromatography.
Chemical Journal of Chinese Universities, 24, (6), 1026-1030, (2003)

Yan WY et al., Capillary electrochromatographic separation of ionizable compounds with a molecular imprinted monolithic cationic exchange column.
Journal of Separation Science, 26, (6-7), 555-561, (2003)

Zhang ZG

Gao BJ et al., Preparation and recognition performance of creatinine-imprinted material prepared with novel surface-imprinting technique.
Journal of Chromatography B, 878, (23), 2077-2086, (2010)

Zhang ZH

Xu WJ et al., Biomimetic chemsensor based on molecular imprinting technology.
Polymeric Materials Science and Engineering, 18, (6), 16-(2002)

Zhang ZH et al., Microspheres sensor based on molecularly imprinted polymer synthesized by precipitation polymerization.
Chinese Journal of Chemistry, 21, (5), 550-555, (2003)

Liao HP et al., Preparation of the molecularly imprinted polymers-based capacitive sensor specific for tegafur and its characterization by electrochemical impedance and piezoelectric quartz crystal microbalance.
Electrochimica Acta, 49, (24), 4101-4107, (2004)

Liao HP et al., Electrosynthesis of imprinted polyacrylamide membranes for the stereospecific L-histidine sensor and its characterization by AC impedance spectroscopy and piezoelectric quartz crystal technique.
Journal of Biochemical and Biophysical Methods, 59, (1), 75-87, (2004)

Zhang ZH et al., Effect of the size of molecularly imprinted polymers sensing materials on piezoelectric quartz crystal sensor performance.
Analytical Sciences, 20, (2), 291-295, (2004)

Zhang ZH et al., Study of molecularly imprinted post-microspheres as dipyridamole sensors.
Instrumentation Science & Technology, 32, (5), 507-518, (2004)

Li H et al., Separation and purification of chlorogenic acid by molecularly imprinted polymer monolithic stationary phase.
Journal of Chromatography A, 1098, (1-2), 66-74, (2005)

Zhang ZH et al., Influence of cross-linkers' amount on the performance of the piezoelectric sensor modified with molecularly imprinted polymers.
Sensors and Actuators B: Chemical, 105, (2), 176-182, (2005)

Zhang ZH et al., Stereoselective histidine sensor based on molecularly imprinted sol-gel films.
Analytical Biochemistry, 336, (1), 108-116, (2005)

Zhang ZH et al., Effect of the extraction method on the MIP-sensor.
Analytical Letters, 38, (2), 203-217, (2005)

Li H et al., Investigation on the Surface Behavior of Dihydromyricetin Imprinted Polymer Monolith.
Journal of Jishou University(Natural Science Edition), 27, (6), 103-106, 128, (2006)

Zhang ZH et al., Molecularly imprinted thin film self-assembled on piezoelectric quartz crystal surface by the sol-gel process for protein recognition.
Biosensors and Bioelectronics, 21, (7), 1244-1251, (2006)

Zhang ZH et al., Electrodeposited sol-gel-imprinted sensing film for cytidine recognition on Au-electrode surface.
Talanta, 69, (2), 435-442, (2006)

Zhang ZH et al., Preparation and characterization of stereoselective L-histidine imprinted microspheres.
Chemical Journal of Chinese Universities, 29, (10), 1941-1946, (2008)

Hu YF et al., Research on Self-assembly MWNTs-clindamycin Molecularly Imprinted Sol-gel Electrochemical Sensor.
Chemical Journal of Chinese Universities-Chinese, 30, (9), 1703-1708, (2009)

Zhang ZH et al., Synthesis, characterization and evaluation of uniformly sized core-shell imprinted microspheres for the separation trans-resveratrol from giant knotweed.
Applied Surface Science, 255, (23), 9327-9332, (2009)

Zhang ZH et al., Preparation and Evaluation of Caffeine Molecularly Imprinted Composite Membrane.
Acta Chimica Sinica, 67, (18), 2121-2126, (2009)

Zhang ML et al., Preparation and Evaluation of Core-Shell Resveratrol Molecularly Imprinted Microspheres.
Chinese Journal of Analytical Chemistry, 38, (1), 129-132, (2010)

Zhang ZH et al., Preparation and Evaluation of Uniform-Sized Sol-Gel Theophylline Imprinted Microspheres as Solid Phase Extraction Sorbent.
Analytical Letters, 43, (15), 2318-2330, (2010)

Zhang ZH et al., Preparation and Application of Core-Shell Sudan I Imprinted Polymers.
Journal of Instrumental Analysis, 29, (2), (2010)

Zhang ZH et al., Novel Layer-by-layer Assembly Multi-walled Carbon Nanotube/Resveratrol Imprinted Sol-gel Electrochemical Sensor.
Acta Chimica Sinica, 68, (5), 431-436, (2010)

Zhang ZH et al., Preparation of Erythromycin-Imprinted Solid-Phase Extraction Material by Sol-Gel Method and the Selective Adsorption.
Acta Polymerica Sinica, (6), 677-683, (2010)

Hua KC et al., Surface hydrophilic modification with a sugar moiety for a uniform-sized polymer molecularly imprinted for phenobarbital in serum.
Acta Biomaterialia, 7, (8), 3086-3093, (2011)

Wen QA et al., Microwave-assisted Heating for Rapid Preparation and On-line Enrichment Application of Core-shell Uridine Imprinted Polymer.
Acta Chimica Sinica, 69, (2), 209-214, (2011)

Zhang ZH et al., Preparation and adsorption performance of gallium ion complex imprinted polymers.
Chemistry Bulletin, 74, (1), 72-77, (2011)

Zhang ZJ

Zhou HJ et al., Flow chemiluminescence sensor for determination of clenbuterol based on molecularly imprinted polymer.
Analytica Chimica Acta, 523, (2), 237-242, (2004)

Zhang ZJ et al., Chemiluminescence micro-flow-injection analysis on a chip.
Luminescence, 20, (4-5), 377-381, (2005)

Zhou HJ et al., Flow through chemiluminescence sensor using molecularly imprinted polymer as recognition elements for detection of salbutamol.
Sensors and Actuators B: Chemical, 107, (2), 798-804, (2005)

He C et al., Chemiluminescence determination of metformin based on hydroxyl radical reaction and molecularly imprinted polymer on-line enrichment.
Analytical and Bioanalytical Chemistry, 385, (1), 128-133, (2006)

He DY et al., Micro flow sensor on a chip for the determination of terbutaline in human serum based on chemiluminescence and a molecularly imprinted polymer.
Talanta, 69, (5), 1215-1220, (2006)

Xiong Y et al., A chemiluminescence sensor for determination of metformin in urine samples based on molecularly imprinted polymer.
Analytical Lab, 25, (3), 5-8, (2006)

Xiong Y et al., Molecularly imprinted on-line solid-phase extraction combined with flow-injection chemiluminescence for the determination of tetracycline.
Analyst, 131, (7), 829-834, (2006)

Xiong Y et al., A chemiluminescence sensor for determination of metformin in urine samples based on molecularly imprinted polymer.
Chinese Journal of Analysis Laboratory, 25, (3), 5-8, (2006)

Yan X et al., Determination of hydralazine with flow injection chemiluminescence sensor using molecularly imprinted polymer as recognition element.
Journal of Pharmaceutical and Biomedical Analysis, 41, (3), 694-700, (2006)

Wang L et al., Molecular imprinted polymer-based chemiluminescence imaging sensor for the detection of trans-resveratrol.
Analytica Chimica Acta, 592, (2), 115-120, (2007)

Xiong Y et al., Flow-injection chemiluminescence sensor for determination of isoniazid in urine sample based on molecularly imprinted polymer.
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 66, (2), 341-346, (2007)

Yang CY et al., Molecularly Imprinted On-line Solid-phase Extraction Combined with Flow Injection Chemiluminescence for Determination of Chlortetracycline.
Chinese Journal of Applied Chemistry, 24, (3), 273-277, (2007)

Yang CY et al., Molecularly imprinted on-line solid-phase extraction combined with chemiluminescence for the determination of pazufloxacin mesilate.
Microchimica Acta, 159, (3), 299-304, (2007)

Chen SM et al., Molecularly imprinted solid-phase extraction combined with electrochemical oxidation fluorimetry for the determination of methotrexate in human serum and urine.
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 70, (1), 36-41, (2008)

He DY et al., Investigation on a chemiluminescence microfluidic sensor on a chip for determination of chlorpromazine based on molecularly imprinted polymer as recognition elements.
Analytical Lab, 27, (9), 37-40, (2008)

Shi ZL et al., Molecular imprinted polymer-based chemiluminescence for the determination of Sudan I.
Journal of Instrumental Analysis, 27, (10), 1071-1074, (2008)

Wang L et al., The study of oxidization fluorescence sensor with molecular imprinting polymer and its application for 6-mercaptopurine (6-MP) determination.
Talanta, 76, (4), 768-771, (2008)

Wang L et al., Molecularly imprinted polymer based on chemiluminescence imaging for the chiral recognition of dansyl-phenylalanine.
Analytical and Bioanalytical Chemistry, 390, (5), 1431-1436, (2008)

Wang L et al., Chemiluminescence imaging assay dipyridamole based on molecular imprinted polymer as recognition material.
Sensors and Actuators B: Chemical, 133, (1), 40-45, (2008)

Chang PP et al., A Novel Chemiluminescence Array Sensor Based on Molecularly Imprinted Polymer.
Acta Chimica Sinica, 67, (23), 2727-2731, (2009)

Chang PP et al., Molecularly imprinted polymer-based chemiluminescence array sensor for the detection of proline.
Analytica Chimica Acta, 666, (1-2), 70-75, (2010)

Zhang ZL

Li CX et al., Synthesis, characterization, and adsorption performance of Pb(II)-imprinted polymer in nano-TiO2 matrix.
Journal of Environmental Sciences, 21, (12), 1722-1729, (2009)

Zhang ZL et al., Synthesis of highly efficient D-naproxen imprinted polymer and investigation of their specific performance.
Journal of Applied Polymer Science, 113, (2), 1050-1062, (2009)

Li CX et al., Synthesis and characterisation of sodium trititanate whisker surface CdII ion-imprinted polymer and selective solid-phase extraction of cadmium.
International Journal of Materials and Structural Integrity, 4, (2-3), 291-307, (2010)

Liu Y et al., A New Sr(II) Ion-imprinted Polymer Grafted onto Potassium Titanate Whiskers: Synthesis and Adsorption Performance for the Selective Separation of Strontium Ions.
Adsorption Science & Technology, 28, (1), 23-37, (2010)

Pan JM et al., Selective Adsorption of Co(II) Ions by Whisker Surface Ion-Imprinted Polymer: Equilibrium and Kinetics Modeling.
Chinese Journal of Chemistry, 28, (12), 2483-2488, (2010)

Zhang ZL et al., Kinetic and thermodynamic analysis of selective adsorption of Cs(I) by a novel surface whisker-supported ion-imprinted polymer.
Desalination, 263, (1-3), 97-106, (2010)

Zhang ZL et al., Molecular recognition material of D-naproxen imprinted polymers' preparation and their microstructure and properties.
Polymeric Materials Science and Engineering, 26, (9), 112-116, (2010)

Zhang ZL et al., Effect of the synthesis initiation mode on the structure and properties of sulfadiazine molecularly imprinted polymers.
Journal of Applied Polymer Science, 119, (6), 3189-3198, (2011)

Zhang ZM

Huang X et al., Incorporation of glutathione peroxidase active site into polymer based on imprinting strategy.
Biosensors and Bioelectronics, 25, (3), 657-660, (2009)

Zhang ZM et al., Simultaneous determination of trace sterols in complicated biological samples by gas chromatography-mass spectrometry coupled with extraction using [beta]-sitosterol magnetic molecularly imprinted polymer beads.
Journal of Chromatography A, 1218, (28), 4275-4283, (2011)

Zhang ZP

Xie CG et al., Surface Molecular Self-Assembly Strategy for TNT Imprinting of Polymer Nanowire/Nanotube Arrays.
Analytical Chemistry, 78, (24), 8339-8346, (2006)

Gao DM et al., A Surface Functional Monomer-Directing Strategy for Highly Dense Imprinting of TNT at Surface of Silica Nanoparticles.
Journal of the American Chemical Society, 129, (25), 7859-7866, (2007)

Guan GJ et al., Single-Hole Hollow Polymer Microspheres toward Specific High-Capacity Uptake of Target Species.
Advanced Materials, 19, (17), 2370-2374, (2007)

Guan GJ et al., Imprinting of Molecular Recognition Sites on Nanostructures and Its Applications in Chemosensors.
Sensors, 8, (12), 8291-8320, (2008)

Xie CG et al., Molecular Imprinting at Walls of Silica Nanotubes for TNT Recognition.
Analytical Chemistry, 80, (2), 437-443, (2008)

Guan GJ et al., Protein-building molecular recognition sites by layer-by-layer molecular imprinting on colloidal particles.
Analyst, 134, (9), 1880-1886, (2009)

Lu Q et al., Tuning of the vinyl groups' spacing at surface of modified silica in preparation of high density imprinted layer-coated silica nanoparticles: A dispersive solid-phase extraction materials for chlorpyrifos.
Talanta, 81, (3), 959-966, (2010)

Peng Y et al., Molecularly imprinted polymer layer-coated silica nanoparticles toward dispersive solid-phase extraction of trace sulfonylurea herbicides from soil and crop samples.
Analytica Chimica Acta, 674, (2), 190-200, (2010)

Xie CG et al., Surface Molecular Self-Assembly for Organophosphate Pesticide Imprinting in Electropolymerized Poly(p-aminothiophenol) Membranes on a Gold Nanoparticle Modified Glassy Carbon Electrode.
Analytical Chemistry, 82, (1), 241-249, (2010)

Liu RY et al., Core-shell nanostructured molecular imprinting fluorescent chemosensor for selective detection of atrazine herbicide.
Analyst, 136, (1), 184-190, (2011)

Zhou DZ et al., Surface imprinted macroporous film for high performance protein recognition in combination with quartz crystal microbalance.
Sensors and Actuators B: Chemical, 153, (1), 96-102, (2011)

Zhang ZQ

Wang YT et al., Potentiometric sensors based on surface molecular imprinting: Detection of cancer biomarkers and viruses.
Sensors and Actuators B: Chemical, 146, (1), 381-387, (2010)

Zhang ZR

Wang GL et al., Electrodeposition of Sol-gel Imprinted Films Modified Electrode and its Application for 3, 4-Dihydroxybenzoic Acids Determination.
Journal of Electrochemistry (China), 14, (2), 17-21, (2008)

Zhang ZT

Zhang ZT et al., Molecularly imprinted zeolites and molecule sieves.
Abstracts of Papers of the American Chemical Society, 220, (INOR), 347-347, (2000)

Zhang ZT et al., Ion-imprinted zeolite: A surface functionalization methodology based on the "ship-in-bottle" technique.
Advanced Materials, 13, (7), 493-496, (2001)

Zhang ZT et al., Fabrication of organic-inorganic nanocomposites via molecular imprinting on layered silicate.
Abstracts of Papers of the American Chemical Society, 223, (INOR), 054-054, (2002)

Zhang ZT et al., Intersurface ion-imprinting synthesis on layered magadiite hosts.
Chemistry of Materials, 15, (15), 2921-2925, (2003)

Dai S et al., Book chapter, Hierarchically imprinted nanostructures for separation of metal ions,
In: Dekker Encyclopedia of Nanoscience and Nanotechnology, Schwarz JA, Contescu CI, Putyera K (Eds.) Marcel Dekker: New York, 1369-1379, (2004)

Zhang ZY

Zhang ZY et al., Recent developments and applications of chemiluminescence sensors.
Analytica Chimica Acta, 541, (1-2), 37-46, (2005)

Chen FQ et al., Preparation of molecularly imprinted polymer microspheres and their recognition for chenodeoxycholic acid.
Chemical Journal of Chinese Universities, 28, (11), 2195-2199, (2007)

Zhao BH

Zhao BH et al., Formation of ordered macroporous membranes from random copolymers by the breath figure method.
Polymer, 46, (22), 9508-9513, (2005)

Zhao BH et al., Preparation and selective permeation of molecularly imprinted membranes with supporting polytetrafluoroethylene filter.
Chinese Journal of Analytical Chemistry, 34, (7), 1003-1006, (2006)

Lu Y et al., Water-assisted formation of novel molecularly imprinted polymer membranes with ordered porous structure.
Polymer, 48, (21), 6205-6209, (2007)

Zhao C

Zhao C et al., Preparation of molecular imprinted film based on chitosan/nafion/nano-silver/poly quercetin for clenbuterol sensing.
Food Chemistry, 129, (2), 595-600, (2011)

Zhao CD

Jiang XM et al., A novel sol-gel-material prepared by a surface imprinting technique for the selective solid-phase extraction of bisphenol A.
Talanta, 72, (1), 119-125, (2007)

Jiang XM et al., Selective solid-phase extraction using molecular imprinted polymer for the analysis of diethylstilbestrol.
Food Chemistry, 108, (3), 1061-1067, (2008)

Zhao CQ

Zhao CS

Yang KG et al., Molecularly imprinted polyethersulfone microspheres for the binding and recognition of bisphenol A.
Analytica Chimica Acta, 546, (1), 30-36, (2005)

Yang KG et al., Preparation and selective binding characterization of Bisphenol A imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 106, (4), 2791-2799, (2007)

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)

Wang DS et al., Molecularly imprinted polyethersulfone microfibers for the binding and recognition of bisphenol A.
Journal of Applied Polymer Science, 114, (6), 4036-4041, (2009)

Yang KG et al., Molecularly imprinted porous polysulfone particles for the binding and recognition of bisphenol A.
Desalination, 245, (1-3), 232-245, (2009)

Yang KG et al., One-Pot Synthesis of Hydrophilic Molecularly Imprinted Nanoparticles.
Macromolecules, 42, (22), 8739-8746, (2009)

Zhao WF et al., Fabrication of pH-responsive molecularly imprinted polyethersulfone particles for bisphenol-A uptake.
Journal of Applied Polymer Science, 113, (2), 916-921, (2009)

Cao FM et al., Self-Assembly Molecularly Imprinted Nanofiber for 4-HA Recognition.
Analytical Letters, 43, (17), 2790-2797, (2010)

Sun SD et al., Polymeric Particles for the Removal of Endocrine Disruptors.
Separation & Purification Reviews, 40, (4), 312-337, (2011)

Zhao D

Ren YM et al., Synthesis and properties of magnetic Cu(II) ion imprinted composite adsorbent for selective removal of copper.
Desalination, 228, (1-3), 135-149, (2008)

Zhao DY

Xu ZX et al., Determination of Trace Para Red Residues in Foods through On-Line Molecularly Imprinted Solid Phase Extraction Coupled with High-Performance Liquid Chromatography.
Journal of Food Science, 75, (1), C49-C54, (2010)

Xin JH et al., Determination of Trace Sudan IV Residues in Foods Through Molecularly Imprinted SPE Coupled with LC.
Chromatographia, 73, (3), 235-242, (2011)

Xu ZX et al., Preparation and Characterization of Hydrophilic Olaquindox Molecularly Imprinted Polymer in Aqueous Environment.
International Journal of Polymer Analysis and Characterization, 16, (1), 67-77, (2011)

Zhao GQ

Li CX et al., An ion-imprinted polymer supported by attapulgite with a chitosan incorporated sol-gel process for selective separation of Ce(III).
Chinese Chemical Letters, 20, (8), 985-989, (2009)

Zhao HL

Zhao HL et al., Hemoglobin-imprinted polymer gel prepared using modified glucosamine as functional monomer.
Chinese Chemical Letters, 19, (2), 233-236, (2008)

Xia YQ et al., Protein recognition onto silica particles using chitosan as intermedium substrate.
Journal of Biomedical Materials Research Part A, 90A, (2), 326-332, (2009)

Zhao HM

Lu N et al., Synthesis of molecular imprinted polymer modified TiO2 nanotube array electrode and their photoelectrocatalytic activity.
Journal of Solid State Chemistry, 181, (10), 2852-2858, (2008)

Zhao HQ

Yang HH et al., Molecularly imprinted polymer as SPE sorbent for selective extraction of melamine in dairy products.
Talanta, 80, (2), 821-825, (2009)

Zhou WH et al., Molecularly imprinted polymer for selective extraction of domoic acid from seafood coupled with high-performance liquid chromatographic determination.
Talanta, 84, (3), 777-782, (2011)

Zhao HX

Tan F et al., Evaluation of a novel microextraction technique for aqueous samples: Porous membrane envelope filled with multiwalled carbon nanotubes coated with molecularly imprinted polymer.
Journal of Separation Science, 34, (6), 707-715, (2011)

Zhao HZ

Cai D et al., A molecular-imprint nanosensor for ultrasensitive detection of proteins.
Nature Nanotechnology, 5, (8), 597-601, (2010)

Zhao J

Zhou J et al., A study of binding action and selectivity of trimethoprim molecular template polymer.
Chemical Journal of Chinese Universities, 20, (2), 204-208, (1999)

Li JP et al., A sensitive and selective sensor for dopamine determination based on a molecularly imprinted electropolymer of o-aminophenol.
Sensors and Actuators B: Chemical, 140, (2), 663-669, (2009)

Zhao J et al., Isoproturon Sensor Based on Molecularly Imprinted Electropolymer.
Chinese Journal of Analytical Chemistry, 37, (8), 1219-1222, (2009)

Gao XC et al., Studies on Recognition and Separation of Neighbor Rare Earth Ions on Scale of Picometer Using Novel Surface Ion-Imprinted Material.
Acta Chimica Sinica, 68, (11), 1109-1118, (2010)

Zhao JC

Fu GQ et al., Bovine serum albumin-imprinted polymer gels prepared by graft copolymerization of acrylamide on chitosan.
Reactive and Functional Polymers, 67, (5), 442-450, (2007)

Zhao JC et al., Synthesis of Zn(II) ion-imprinted solid-phase extraction material and its analytical application.
Analytica Chimica Acta, 603, (1), 87-92, (2007)

Liang XY et al., Preparation of imidacloprid-imprinted polymer and its application as a solid phase extract.
Analytical Lab, 27, (5), 9-12, (2008)

Zhao JJ

Zuo YJ et al., The preparation of poly(o-phenylenediamine) sarin acid imprinting nanometer layer and its structural characterization.
Acta Physico-Chimica Sinica, 19, (6), 528-532, (2003)

Cao BQ et al., Synthetic Progress of Molecularly Imprinted Polymers.
Modern Scientific Instruments, (6), 29-33, (2006)

Zhao JY

Wu JM et al., Trypsin immobilization by direct adsorption on metal ion chelated macroporous chitosan-silica gel beads.
International Journal of Biological Macromolecules, 39, (4-5), 185-191, (2006)

Zhao K

Urh M et al., Book chapter, Affinity Chromatography: General Methods,
In: Guide to Protein Purification, Burgess RR, Deutscher MP (Eds.) Academic Press: Ch. 26, 417-438, (2009)

Zhao KY

Zhao KY et al., Macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres with the surface imprinting of bovine serum albumin in inverse-phase suspension.
Journal of Applied Polymer Science, 109, (4), 2687-2693, (2008)

Zhao KY et al., Bovine serum albumin imprinted calcium phosphate/polyacrylate/alginate multi-hybrid polymer microspheres in inverse-phase suspension.
E-Polymers, Art. No. 100-(2008)

Zhao KY et al., Molecularly-imprinted calcium phosphate/calcium alginate Composite microspheres by surface imprinting via silane crosslinking.
Adsorption Science & Technology, 26, (8), 631-641, (2008)

Zhao KY et al., Rebinding and recognition properties of protein-macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres.
Reactive and Functional Polymers, 68, (3), 732-741, (2008)

Shen L et al., Preparation of protein molecular imprinted polymer hydrogel by radiation grafting of polypropylene.
Journal of Tianjin Polytechnic University, 28, (1), 19-22, (2009)

Zhao KY et al., Preparation of bovine serum albumin-imprinted calcium polyacrylate/alginate hybrid microspheres via Ca2+ crosslinking.
Journal of Applied Polymer Science, 113, (2), 1133-1140, (2009)

Ying XG et al., Preparation and characterization of protein imprinted agarose microspheres.
Polymer Bulletin, 65, (3), 245-263, (2010)

Zhao KY et al., Proceeding, The rebinding properties of bovine serum albumin imprinted calcium phosphate/polyacrylate/alginate hybrid polymer microspheres,
In: Advanced Materials Research, Jiang ZY, Han JT, Liu XH (Eds.), 1636-1640, (2010)

Zhao L

Zhao L et al., Book chapter, Application of Molecular Imprinting Technique in Organophosphorus Pesticides Detection,
In: Computer and Computing Technologies in Agriculture IV, Li DL, Liu YD, Chen YY (Eds.) Springer: Boston, 290-295, (2011)

Zhao L et al., Proceeding, MISPE Combined with GCMS for Analysis of Organophosphorus Pesticides from Environmental Water Sample,
In: Advanced Materials Research, Cao Z, Cao XQ, Sun LX, He YH (Eds.), 3216-3220, (2011)

Zhao LA

Huang YP et al., Characterization of Convection for Molecularly Imprinted Monolith.
Chromatographia, 71, (7), 559-569, (2010)

Zhao LJ

Zhao LJ et al., Synthesis of Molecularly Imprinted Polymer Microspheres with Salicylic Acid as Template and the Study of Their Binding Characteristics.
Journal of Qiqihar University (Natural Science Edition), 21, (4), 14-16, (2005)

He DF et al., Preparation of 4-hydroxybenzoic acid imprinted polymers and recognization of its isomeric compound in aqueous media.
Journal of Qiqihar University (Natural Science Edition), 22, (1), 31-33, (2006)

Zhao LX

Feng QZ et al., Synthesis and binding site characteristics of 2, 4, 6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)

Feng QZ et al., Molecularly imprinted solid-phase extraction and flow-injection chemiluminescence for trace analysis of 2, 4-dichlorophenol in water samples.
Analytical and Bioanalytical Chemistry, 391, (3), 1073-1079, (2008)

Ji F et al., Synthesis and evaluation of surface molecularly imprinted silica for propazine pesticide.
Chinese Journal of Analytical Chemistry, 36, (7), 920-924, (2008)

Feng QZ et al., Molecularly imprinted polymer as micro-solid phase extraction combined with high performance liquid chromatography to determine phenolic compounds in environmental water samples.
Analytica Chimica Acta, 650, (1), 70-76, (2009)

Feng QZ et al., Molecularly imprinted solid-phase extraction combined with high performance liquid chromatography for analysis of phenolic compounds from environmental water samples.
Journal of Hazardous Materials, 167, (1-3), 282-288, (2009)

Jiang TH et al., Molecularly imprinted solid-phase extraction for the selective determination of 17[beta]-estradiol in fishery samples with high performance liquid chromatography.
Talanta, 78, (2), 442-447, (2009)

Zhao MG

Zhao MP

Zhao MP et al., The analysis of phenolic environmental estrogens.
Chinese Journal of Analytical Chemistry, 31, (1), 103-109, (2003)

Zhao MP et al., Preparation and the recognition property of molecular imprinted polymer of bisphenol A.
Chemical Journal of Chinese Universities, 24, (7), 1204-1206, (2003)

Wu LQ et al., Theoretical and experimental study of nicotinamide molecularly imprinted polymers with different porogens.
Analytica Chimica Acta, 549, (1-2), 39-44, (2005)

Wang J et al., Recognition performance of o-phthalic Acid-Cu(Ac)(2) molecular imprinting polymers.
Chemical Journal of Chinese Universities, 27, (8), 1566-1569, (2006)

Chen ZY et al., Molecularly imprinted soluble nanogels as a peroxidase-like catalyst in the oxidation reaction of homovanillic acid under aqueous conditions.
Applied Catalysis A: General, 328, (2), 252-258, (2007)

Wang J et al., Catalytical oxidation of styrene by molecularly imprinted polymer with phenylacetic acid as template and hemin as co-monomer.
Chinese Chemical Letters, 18, (8), 981-984, (2007)

Chen ZY et al., Protein-responsive imprinted polymers with specific shrinking and rebinding.
Journal of Molecular Recognition, 21, (1), 71-77, (2008)

Hua ZD et al., Thermosensitive and Salt-Sensitive Molecularly Imprinted Hydrogel for Bovine Serum Albumin.
Langmuir, 24, (11), 5773-5780, (2008)

Hua ZD et al., Fabrication of a surface imprinted hydrogel shell over silica microspheres using bovine serum albumin as a model protein template.
Biosensors and Bioelectronics, 25, (3), 615-622, (2009)

Li SH et al., Cupric ion enhanced molecular imprinting of bovine serum albumin in hydrogel.
Journal of Separation Science, 32, (19), 3359-3363, (2009)

Wang J et al., Molecular imprinting of protein by coordinate interaction.
Chinese Chemical Letters, 20, (6), 747-750, (2009)

Chen ZY et al., pH-Sensitive Water-Soluble Nanospheric Imprinted Hydrogels Prepared as Horseradish Peroxidase Mimetic Enzymes.
Advanced Materials, 22, (13), 1488-1492, (2010)

Zhao N

Lu YK et al., Preparation and application of the sacrificial mesoporous silica imprinted polymers for the selective solid-phase extraction of ofloxacin residues in chicken.
Chemical Journal on Internet, 10, (6), Art. No. 106032pe-(2008)

Zhao N et al., Preparation of An SPR Sensor Based on Nicosulfuron Molecularly Imprinted Polymer and Its Analytical Application.
Acta Chimica Sinica, 69, (10), 1191-1196, (2011)

Zhao PN

Zhao Q

Kan XW et al., Molecularly imprinted polymers microsphere prepared by precipitation polymerization for hydroquinone recognition.
Talanta, 75, (1), 22-26, (2008)

Kan XW et al., Preparation and Recognition Properties of Bovine Hemoglobin Magnetic Molecularly Imprinted Polymers.
Journal of Physical Chemistry B, 114, (11), 3999-4004, (2010)

Zhao QH

Dai CL et al., Molecular imprinted macroporous chitosan coated mesoporous silica xerogels for hemorrhage control.
Biomaterials, 31, (30), 7620-7630, (2010)

Zhao R

Chen ZY et al., Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine.
Biomedical Chromatography, 19, (7), 533-538, (2005)

Liu XJ et al., Monolithic molecularly imprinted polymer for sulfamethoxazole and molecular recognition properties in aqueous mobile phase.
Analytica Chimica Acta, 571, (2), 235-241, (2006)

Liu XJ et al., Preparation of Molecularly Imprinted Monolith for Trimethoprim Molecule and its Chromatographic Property.
Chemical Journal of Chinese Universities, 28, (10), 1878-1880, (2007)

Liu XJ et al., Uniform-sized molecularly imprinted polymer for metsulfuron-methyl by one-step swelling and polymerization method.
Talanta, 71, (3), 1205-1210, (2007)

Liu XJ et al., Determination of methotrexate in human serum by high-performance liquid chromatography combined with pseudo template molecularly imprinted polymer.
Journal of Chromatography A, 1216, (44), 7533-7538, (2009)

Liu JZ et al., A novel polychloromethylstyrene coated superparamagnetic surface molecularly imprinted core-shell nanoparticle for bisphenol A.
Journal of Materials Chemistry, 21, (25), 9232-9238, (2011)

Zhao T

Zhao W

Kong Y et al., Molecularly imprinted polypyrrole prepared by electrodeposition for the selective recognition of tryptophan enantiomers.
Journal of Applied Polymer Science, 115, (4), 1952-1957, (2010)

Zhao WF

Zhao WF et al., Fabrication of pH-responsive molecularly imprinted polyethersulfone particles for bisphenol-A uptake.
Journal of Applied Polymer Science, 113, (2), 916-921, (2009)

Zhao WH

Zhao WT

Zhao WT et al., Proceeding, A Biomimetic Sensor for Fast Lysozyme Detection,
In: Advanced Materials Research, Cao Z, Cao XQ, Sun LX, He YH (Eds.), 283-287, (2011)

Zhao X

Zheng MM et al., Selective sample pretreatment by molecularly imprinted polymer monolith for the analysis of fluoroquinolones from milk samples.
Journal of Chromatography A, 1217, (14), 2075-2081, (2010)

Zhao XD

Du ZW et al., Preparation and Properties of TNT Imprinted Polymer Microspheres.
Acta Polymerica Sinica, (3), 360-365, (2010)

Zhao XH

Zhao XL

Sun HW et al., On-line solid-phase extraction of arsanilic acid from water with arsanilic acid imprinted monolith.
Chemical Journal on Internet, 8, (6), (2006)

Zhao XM

Yang LQ et al., Selective enrichment and determination of nicosulfuron in water and soil by a stir bar based on molecularly imprinted polymer coatings.
Analytica Chimica Acta, 670, (1-2), 72-77, (2010)

Zhao XW

Zhao YJ et al., Multiplex Label-Free Detection of Biomolecules with an Imprinted Suspension Array.
Angewandte Chemie International Edition, 48, (40), 7350-7352, (2009)

Zhao XY

Wang P et al., Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition.
Chinese Chemical Letters, 22, (5), 611-614, (2011)

Zhao Y

Schultz LG et al., Synthesis of cored dendrimers with internal cross-links.
Angewandte Chemie-International Edition, 40, (10), 1962-1966, (2001)

Su HJ et al., Biosorption of Ni2+ by the surface molecular imprinting adsorbent.
Process Biochemistry, 41, (6), 1422-1426, (2006)

Su H et al., Selective adsorption of surface molecular imprinted adsorbent based on mycelium.
Journal of Chemical Industry and Engineering (China), 58, (6), 1473-1477, (2007)

Kan XW et al., Composites of Multiwalled Carbon Nanotubes and Molecularly Imprinted Polymers for Dopamine Recognition.
Journal of Physical Chemistry C, 112, (13), 4849-4854, (2008)

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)

Zhao YJ

Zhao YJ et al., Multiplex Label-Free Detection of Biomolecules with an Imprinted Suspension Array.
Angewandte Chemie International Edition, 48, (40), 7350-7352, (2009)

Zhao YM

Guan P et al., Book chapter, Influences of preparative conditions on properties of erythromycin- molecularly imprinted membrane,
In: Advanced Polymer Processing, Ma LX, Wang CS, Yang WM (Eds.) Scientific.Net: 119-124, (2009)

Yu JY et al., Book chapter, Synthesis and properties of molecularly imprinted composite membranes of roxithromycin,
In: Advanced Polymer Processing, Ma LX, Wang CS, Yang WM (Eds.) Scientific.Net: 80-85, (2009)

Zhao YP

Zhao YY

Wu H et al., Molecularly imprinted organic-inorganic hybrid membranes for selective separation of phenylalanine isomers and its analogue.
Separation And Purification Technology, 68, (1), 97-104, (2009)

Zhao Z

Guo MJ et al., Protein-imprinted polymer with immobilized assistant recognition polymer chains.
Biomaterials, 27, (24), 4381-4387, (2006)

Zhao Z et al., Molecular imprinted polymer with cloned bacterial protein template enriches authentic target in cell extract.
FEBS Letters, 580, (11), 2750-2754, (2006)

Han RF et al., Separation/enrichment of active natural low content protein using protein imprinted polymer.
Journal of Chromatography B, 873, (1), 113-118, (2008)

Long Y et al., Two-step purification of low-content cellular protein using protein-imprinted polymers.
Analytical Biochemistry, 380, (2), 268-275, (2008)

Long Y et al., Molecular imprinted polymer with positively charged assistant recognition polymer chains for adsorption/enrichment of low content target protein.
Chinese Science Bulletin, 53, (17), 2617-2623, (2008)

Liu HJ et al., Preparation of molecular imprinted polymer with quaternary ammonium groups as recognition sites for separation of pig cyclophilin 18 and bovine serum albumin.
Journal of Separation Science, 33, (12), 1856-1862, (2010)

Zhao ZJ

Zhao ZJ et al., Structured Water and Water-Polymer Interactions in Hydrogels of Molecularly Imprinted Polymers.
Journal of Physical Chemistry B, 112, (25), 7515-7521, (2008)

Zhao ZS

Jiang GB et al., Progress of solid-phase microextraction coatings and coating techniques.
Journal of Chromatographic Science, 44, (6), 324-332, (2006)

Zharnikov M

Hirsch T et al., Size-controlled electrochemical synthesis of metal nanoparticles on monomolecular templates.
Angewandte Chemie-International Edition, 44, (41), 6775-6778, (2005)

Zharov I

Zimmerman SC et al., Synthetic hosts by monomolecular imprinting inside dendrimers.
Nature, 418, (6896), 399-403, (2002)

Zimmerman SC et al., Molecular imprinting inside dendrimers.
Journal of the American Chemical Society, 125, (44), 13504-13518, (2003)

Zhen T

Bing NC et al., Proceeding, Analysis on microstructure of polymers for selective separation of naproxen enantiomers,
Art. No. 5230138, (2009)

Zheng C

Zheng C et al., Separation and Recognition of Biomacromolecule by Molecular Imprinting Technique.
Chinese Journal of Chromatography, 24, (3), 309-314, (2006)

Liu ZS et al., Molecularly imprinted polymers as a tool for separation in CEC.
Electrophoresis, 28, (1-2), 127-136, (2007)

Zheng C et al., Thermodynamic studies on 4-hydroxybenzoic acid-imprinted polymer monolith by frontal analysis.
Chemical Journal of Chinese Universities, 28, (8), 1443-1448, (2007)

Zheng C et al., Mechanism of Molecular Recognition on Tetrapetide-imprinted Monolith by Capillary Electrochromatography.
Chinese Journal of Chemistry, 26, (10), 1857-1862, (2008)

Huang YP et al., Recent developments of molecularly imprinted polymer in CEC.
Electrophoresis, 30, (1), 155-162, (2009)

Huang YP et al., Molecularly Imprinted Polymers for the Separation of Organic Compounds in Capillary Electrochromatography.
Current Organic Chemistry, 15, (11), 1863-1870, (2011)

Zheng CJ

Huang XD et al., Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting.
Journal of Molecular Recognition, 16, (6), 406-411, (2003)

Zheng F

Zheng H

He Q et al., Preconcentration and separation of Zn2+ using surface zinc(II) imprinted functionalized silica gel sorbent.
Chemia Analityczna, 51, (5), 715-725, (2006)

Jiang N et al., Selective solid-phase extraction of nickel(II) using a surface-imprinted silica gel sorbent.
Analytica Chimica Acta, 577, (2), 225-231, (2006)

Zheng H et al., Studies on the molecular recognition and binding characteristics in Sudan red III molecularly imprinted polymer.
Journal of Qinghai University(Natural Science), 24, (3), 61-64, (2006)

Zheng H et al., Studies on the Molecular Recognition and Binding Characteristics in Rhodamine 6G MoLecularly Imprinted Polymer.
Journal of Qinghai Normal University(Natural Science Edition), (2), 72-75, (2006)

Chang XJ et al., Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique.
Talanta, 71, (1), 38-43, (2007)

He Q et al., Determination of chromium(III) and total chromium in natural waters using a surface ion-imprinted silica gel as selective adsorbent.
International Journal of Environmental Analytical Chemistry, 88, (6), 373-384, (2008)

Zheng H et al., Selective Solid-phase Extraction of Hg(II) Using Silica Gel Surface - Imprinting Technique.
Chemia Analityczna, 53, (5), 673-687, (2008)

Wang C et al., Preparation and molecular recognition of D-p-hydroxyphenylglycine imprinted polymer.
CIESC Journal, 60, (4), 923-928, (2009)

Zheng HF

Zheng HF et al., Enhanced Binding and Biosensing of Carbohydrate-Functionalized Monolayers to Target Proteins by Surface Molecular Imprinting.
The Journal of Physical Chemistry B, 113, (32), 11330-11337, (2009)

Zheng HL

Jiang YX et al., Spectroscopy Study on the Selectively Distinguishing Cefalexin with the Molecular Imprinted Polymer.
Spectroscopy and Spectral Analysis, 31, (7), 1852-1856, (2011)

Zheng HY

Jing T et al., Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples.
Journal of Separation Science, 34, (12), 1469-1476, (2011)

Xie YT et al., Molecularly imprinted polymer microspheres enhanced biodegradation of bisphenol A by acclimated activated sludge.
Water Research, 45, (3), 1189-1198, (2011)

Zheng J

Zheng J et al., Book chapter, Chiral Analysis in Capillary Electrochromatography (CEC) and CEC Coupled to Mass Spectrometry,
In: Chiral Separation Techniques, Subramanian G (Ed.) 441-504, (2007)

Zheng JJ

Liu L et al., Novel molecularly imprinted polymer prepared by seed swelling polymerization.
Acta Scientiarum Natralium Universitatis Sunyatseni, 43, (3), 45-48, (2004)

Zheng JY

Wang HF et al., A Room Temperature Ionic Liquid (RTIL)-Mediated, Non-Hydrolytic Sol-Gel Methodology to Prepare Molecularly Imprinted, Silica-Based Hybrid Monoliths for Chiral Separation.
Advanced Materials, 18, (24), 3266-3270, (2006)

Zheng LH

Hu TP et al., Molecular recognition and adsorption performance of benzothiophene imprinted polymer on silica gel surface.
Journal of Fuel Chemistry and Technology, 38, (6), 722-729, (2010)

Zheng M

Zhang SZ et al., Preparation of cholesterol imprinted polymerized organogel and selectivity adsorption ability.
Acta Polymerica Sinica, (4), 390-394, (2011)

Zheng MM

Zheng MX

Zheng MX et al., Rationally Designing Molecularly Imprinted Polymer Toward a High Specific Adsorbent by Using Metal as Assembled Pivot.
Journal of Macromolecular Science, Part A, 44, (11), 1187-1194, (2007)

Li SJ et al., Selective Adsorption and Molecular Recognition by a Molecularly Imprinted Polymer: Kinetic Study and Analysis.
Journal of the Chinese Chemical Society, 55, (1), 121-128, (2008)

Li SJ et al., Molecularly imprinted polymers: Thermodynamic and kinetic considerations on the specific sorption and molecular recognition.
Sensors, 8, (4), 2854-2864, (2008)

Li SJ et al., Molecularly imprinted polymers: modulating molecular recognition by a thermal phase transition in the binding framework.
Analytical and Bioanalytical Chemistry, 392, (1), 177-185, (2008)

Zheng MX et al., Molecularly imprinted polymer: Using the template-monomer strategy towards a highly selective sorbent.
Polymers & Polymer Composites, 16, (1), 47-54, (2008)

Zheng N

Fu Q et al., Molecularly imprinted polymers from nicotinamide and its positional isomers.
Journal of Molecular Recognition, 14, (3), 151-156, (2001)

Zheng N et al., Chromatographic characterization of sulfonamide imprinted polymers.
Microchemical Journal, 69, (2), 153-158, (2001)

Zheng N et al., Molecular recognition characteristics of Cu complex imprinted polymer.
Acta Chimica Sinica, 59, (10), 1572-1576, (2001)

Zeng YN et al., Preparation and cyclic voltammetry characterization of Cu-dipyridyl imprinted polymer.
Chinese Chemical Letters, 13, (4), 317-320, (2002)

Zeng YN et al., Cyclic voltammetry characterization of metal complex imprinted polymer.
Journal of Molecular Recognition, 15, (4), 204-208, (2002)

Zheng N et al., Sulfonamide imprinted polymers using co-functional monomers.
Analytica Chimica Acta, 452, (2), 277-283, (2002)

Svenson J et al., A molecularly imprinted polymer-based synthetic transaminase.
Journal of the American Chemical Society, 126, (27), 8554-8560, (2004)

Zheng N et al., Sulfamethoxazole-imprinted polymer for selective determination of sulfamethoxazole in tablets.
Journal of Chromatography A, 1033, (1), 179-182, (2004)

Yang Q et al., Removal of Cr3+ by the surface molecularly imprinted adsorbent by penicillium chysogenum mycelium in wastewater.
Environmental Pollution and Control, 28, (1), 14-16, 27, (2006)

Zheng R

Zheng R, Proceeding, Development of a molecularly imprinted polymer based surface plasmon resonance sensor for theophylline monitoring,
Vo-Dinh T, Lakowicz JR (Eds.), Article No. 79110F, (2011)

Zheng SH

Huang JT et al., Molecularly imprinting of polymeric nucleophilic catalysts containing 4-alkylaminopyridine functions.
Polymer, 45, (12), 4349-4354, (2004)

Huang JT et al., Template imprinting amphoteric polymer for the recognition of proteins.
Journal of Applied Polymer Science, 95, (2), 358-361, (2005)

Zheng SL

Shi XZ et al., Molecularly imprinted polymer microspheres for solid-phase extraction of chloramphenicol residues in foods.
Journal of Chromatography B, 850, (1-2), 24-30, (2007)

Qu GR et al., Metal ion mediated synthesis of molecularly imprinted polymers targeting tetracyclines in aqueous samples.
Journal of Chromatography B, 877, (27), 3187-3193, (2009)

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)

Zheng WJ

Zheng WP

Chen XX et al., Preparation of chloramphenicol molecularly imprinted solid-phase extraction cartridge and the optimization of extraction conditions.
Journal of South China University of Technology (Natural Science), 32, (7), 51-55, (2004)

Zheng X

Zheng X et al., Selective modification of binding sites of molecularly imprinted polymer.
Journal of Chemical Industry and Engineering (China), 59, (11), 2929-2934, (2008)

Ma XL et al., Preparation and Recognition of Naringin Molecularly Imprinted Membranes in Aqueous Media.
Acta Polymerica Sinica, (4), 416-422, (2010)

Ma XL et al., Preparation and Application of Naringin Sensor Based on Molecularly Imprinting Technique.
Chinese Journal of Analytical Chemistry, 38, (1), 100-104, (2010)

Ma XL et al., Preparation of molecularly imprinted CS membrane for recognizing naringin in aqueous media.
Polymer Bulletin, 66, (6), 853-863, (2011)

Zheng XH

Zheng XM

Zheng XM et al., Pore structure and binding character of uniform-sized molecularly imprinted polymer beads prepared by one-step swelling and polymerization.
Journal of Functional Materials, 36, (11), 1811-1816, (2005)

Zheng XM et al., Preparation of Naringenin Molecularly Imprinted Polymeric Microspheres.
Materials Review, 20, (9), 131-133, 143, (2006)

Zheng XM et al., Study of Binding Characteristics of Quinazoline Molecularly Imprinted Polymeric Microspheres.
Fine Chemicals, 23, (9), 833-836, 840, (2006)

Zheng XM et al., Synthesis and Recognition Capabilities of Quinazoline Molecularly-Imprinted Polymeric Microspheres.
Journal of South China University of Technology (Natural Science Edition), 35, (4), 25-29+34, (2007)

Zheng XM et al., Preparation of monodisperse molecularly imprinted polymer beads by a single-step swelling and polymerization method.
Journal of Chemical Engineering of Chinese Universities, 21, (1), 116-121, (2007)

Zheng XM et al., Preparation of molecularly imprinted polymer films on monodisperse macromolecular beads.
Journal of Applied Polymer Science, 113, (4), 2620-2627, (2009)

Zheng XM et al., The relationships between structure and properties of molecularly imprinted polymeric microspheres.
Journal of Chemical Engineering of Chinese Universities, 24, (3), 492-497, (2010)

Zheng Y

Zheng Y, Proceeding, Interfacial molecular imprinting for the production of immunoresponsive materials,
(2006)

Zheng Y, Proceeding, Surface molecularly imprinted polymers for the recognition of protein,
(2007)

Zheng YM

Liu HJ et al., Improvement of metal adsorption onto chitosan/Sargassum sp. composite sorbent by an innovative ion-imprint technology.
Water Research, 45, (1), 145-154, (2011)

Zheng YQ

He LM et al., Novel cyromazine imprinted polymer applied to the solid-phase extraction of melamine from feed and milk samples.
Journal of Chromatography A, 1216, (34), 6196-6203, (2009)

He LM et al., Solid-phase extraction of melamine from aqueous samples using water-compatible molecularly imprinted polymers.
Journal of Separation Science, 32, (19), 3310-3318, (2009)

Zheng YQ et al., Preparation of Tilmicosin Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 38, (1), 95-99, (2010)

Zheng YQ et al., Molecularly imprinted solid-phase extraction for determination of tilmicosin in feed using high performance liquid chromatography.
Analytica Chimica Acta, 690, (2), 269-274, (2011)

Zheng ZH

Wang XB et al., Magnetic Molecularly Imprinted Polymer Particles Synthesized by Suspension Polymerization in Silicone Oil.
Macromolecular Rapid Communications, 27, (14), 1180-1184, (2006)

Wang XB et al., Synthesis of molecularly imprinted polymer particles by suspension polymerization in silicon oil.
Chinese Chemical Letters, 17, (9), 1243-1246, (2006)

Zheng ZS

Zhang SJ et al., On-Line Preconcentration and Analysis of Metribuzin Residues in Corn Fields by Use of a Molecularly Imprinted Polymer.
Chromatographia, 69, (7), 615-619, (2009)

Zheng ZX

Zhenhe C

Barrios CA et al., Molecularly imprinted polymer diffraction grating as label-free optical bio(mimetic)sensor.
Biosensors and Bioelectronics, 26, (5), 2801-2804, (2011)

Zherdev AV

Urusov AE et al., Immunochemical methods of mycotoxin analysis (review).
Applied Biochemistry and Microbiology, 46, (3), 253-266, (2010)

Zhiang WZ

Lu YB et al., Synthesis and Properties Study of Quinine Molecularly Imprinted Polymer.
Journal of Analytical Science, 16, (04), 310-313, (2000)

Zhibrova Y

Zyablov AN et al., Determination of glycine in aqueous solutions using a molecularly imprinted polymer-modified piezosensor (published in Zhurnal Analiticheskoi Khimii, 2010, Vol. 65, No. 1, pp. 93-95.).
Journal of Analytical Chemistry, 65, (1), 91-93, (2010)

Zhong AF

Wang LM et al., Selective separation of lead from aqueous solution with a novel Pb(II) surface ion-imprinted sol-gel sorbent.
Microchimica Acta, 165, (3), 367-372, (2009)

Zhong FC

Liu Y et al., Application of Molecular Imprinting and Fluorescence Analysis Techniques in Explosive Detection.
Progress In Chemistry, 21, (12), 2712-2717, (2009)

Zhong GM

Sajonz P et al., Study of the thermodynamics and mass transfer kinetics of two enantiomers on a polymeric imprinted stationary phase.
Journal of Chromatography A, 810, (1-2), 1-17, (1998)

Zhong N

Zhong N et al., Hydrophilic cholesterol-binding molecular imprinted polymers.
Tetrahedron Letters, 42, (10), 1839-1841, (2001)

Zhong S

Zhang CJ et al., Cellulose acetate-based molecularly imprinted polymeric membrane for separation of vanillin and o-vanillin.
Brazilian Journal of Chemical Engineering, 25, (2), 365-373, (2008)

Zhong SA

Lei QF et al., Molecular recognition characteristics and solid-phase extraction in epigallocatechin gallate imprinted polymer.
Chinese Journal of Analytical Chemistry, 33, (6), 857-860, (2005)

Xiang HY et al., Synthesis of Resveratrol Imprinted Polymer and Its Application in Separation of Active Ingredent in Polygonum cuspidatum Sieb. et Zucc. Extracts.
Chinese Journal of Applied Chemistry, 22, (7), 739-743, (2005)

Zhong SA et al., Selective recognition in molecularly imprinted polymer and its chromatographic characterization for cinchonine.
Journal of Central South University of Technology (English Edition), 12, (z1), 102-107, (2005)

Qiu ZY et al., Preparation and Separation Properties of Molecularly Imprinted Composite Membranes with Nicotinic Acid as Template.
Acta Chimica Sinica, 68, (3), 246-250, (2010)

Jiang GS et al., Synthesis of molecularly imprinted organic-inorganic hybrid azobenzene materials by sol-gel for radiation induced selective recognition of 2, 4-dichlorophenoxyacetic acid.
Radiation Physics and Chemistry, 80, (2), 130-135, (2011)

Li XF et al., Computer Simulation and Preparation of Molecularly Imprinted Composite Membranes with Chlorogenic Acid as Template.
Acta Chimica Sinica, 69, (6), 693-700, (2011)

Li XF et al., Computer simulation and preparation of molecularly imprinted polymer membranes with chlorogenic acid as template.
Polymer International, 60, (4), 592-598, (2011)

Zhong YG

Wang RY et al., Synthesis of chloramphenicol molecularly imprinted polymer and its analytical application.
Journal of Instrumental Analysis, 27, (9), 947-950, (2008)

Wang RY et al., Study on the determination of trace chloramphenicol residue in milk by HPLC with matrix solid-phase dispersion using molecularly imprinted polymer as an adsorbent.
Analytical Lab, 28, (8), 26-28, (2009)

Zhong YQ

Yin XY et al., The Spectroscopy Analysis of Intermolecular Interaction Between the Template Molecule and Functional Monomer Before Polymerization.
Spectroscopy and Spectral Analysis, 30, (8), 2211-2214, (2010)

Zhou AH

Liang CD et al., Molecular imprinting polymer coated BAW bio-mimic sensor for direct determination of epinephrine.
Analytica Chimica Acta, 415, (1-2), 135-141, (2000)

Peng H et al., Characterization of electrosynthesized poly(o-aminophenol) as a molecular imprinting material for sensor preparation by means of quartz crystal impedance analysis.
Analytical Letters, 35, (3), 435-450, (2002)

Zhou CS

Lei QF et al., Molecular recognition characteristics and solid-phase extraction in epigallocatechin gallate imprinted polymer.
Chinese Journal of Analytical Chemistry, 33, (6), 857-860, (2005)

Zhou DZ

Yang HA et al., Surface hydrophilic modification with well-defined glycopolymer for protein imprinting matrix.
International Journal of Biological Macromolecules, 48, (3), 432-438, (2011)

Zhou FM

Huang JX et al., Enantioselective discrimination of D- and L-phenylalanine by chiral polyaniline thin films.
Advanced Materials, 15, (14), 1158-1161, (2003)

Zhou GL

Xu XL et al., A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.
Talanta, 78, (1), 26-32, (2009)

Zhou GW

Tang Y et al., Application of chiral selectors in chromatographic analysis.
Journal of Analytical Science, 17, (4), 327-333, (2001)

Zhou H

Yan SL et al., Progress of molecular imprinting technique on the determination of pesticides residues.
Journal of Hygiene Research, 34, (2), 227-230, (2005)

Yang KG et al., Preparation and selective binding characterization of Bisphenol A imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 106, (4), 2791-2799, (2007)

Yang KG et al., Molecularly imprinted porous polysulfone particles for the binding and recognition of bisphenol A.
Desalination, 245, (1-3), 232-245, (2009)

Kan XW et al., Molecular imprinting polymer electrosensor based on gold nanoparticles for theophylline recognition and determination.
Microchimica Acta, 171, (3), 423-429, (2010)

Hao HX et al., Molecularly imprinted polymers for highly sensitive detection of morphine using surface plasmon resonance spectroscopy.
Chinese Chemical Letters, 22, (4), 477-480, (2011)

Zhou HC

Guo WL et al., Selective adsorption and separation of BPA from aqueous solution using novel molecularly imprinted polymers based on kaolinite/Fe3O4 composites.
Chemical Engineering Journal, 171, (2), 603-611, (2011)

Zhou HJ

Zhou HJ et al., Flow chemiluminescence sensor for determination of clenbuterol based on molecularly imprinted polymer.
Analytica Chimica Acta, 523, (2), 237-242, (2004)

He DY et al., Micro flow sensor on a chip for the determination of terbutaline in human serum based on chemiluminescence and a molecularly imprinted polymer.
Talanta, 69, (5), 1215-1220, (2006)

Xiong Y et al., A chemiluminescence sensor for determination of metformin in urine samples based on molecularly imprinted polymer.
Analytical Lab, 25, (3), 5-8, (2006)

Xiong Y et al., Molecularly imprinted on-line solid-phase extraction combined with flow-injection chemiluminescence for the determination of tetracycline.
Analyst, 131, (7), 829-834, (2006)

Xiong Y et al., A chemiluminescence sensor for determination of metformin in urine samples based on molecularly imprinted polymer.
Chinese Journal of Analysis Laboratory, 25, (3), 5-8, (2006)

Zhou HK

Xie CG et al., Preparation of Electrochemical Sensor for Salicylic Acid Based on Molecular Imprinted Film.
Chinese Journal of Analytical Chemistry, 37, (7), 1045-1048, (2009)

Xie CG et al., Molecular imprinting method for on-line enrichment and chemiluminescent detection of the organophosphate pesticide triazophos.
Microchimica Acta, 171, (3), 355-362, (2010)

Zhou HQ

Wei CP et al., Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor.
Talanta, 83, (5), 1422-1427, (2011)

Zhou HY

Yan SL et al., Characterization and quality assessment of binding properties of malachite green molecularly imprinted polymers prepared by precipitation polymerization in acetonitrile.
Dyes and Pigments, 74, (3), 572-577, (2007)

Yao W et al., Recognition of Staphylococcus enterotoxin via molecularly imprinted beads.
Journal of Separation Science, 31, (2), 413-418, (2008)

Zhou J

Zhou J et al., Studies on character of adsorption and recognition of etharidine template polymer.
Chemical Journal of Chinese Universities, 19, (9), 1388-1392, (1998)

Zhou J et al., Binding study on 5, 5-diphenylhydantoin imprinted polymer constructed by utilizing an amide functional group.
Analytica Chimica Acta, 394, (2-3), 353-359, (1999)

Zhou J et al., Selective enrichment and direct determination of trace drug by solid-phase extraction.
Chinese Journal of Analytical Chemistry, 27, (1), 5-9, (1999)

Zhou J et al., A study of binding action and selectivity of trimethoprim molecular template polymer.
Chemical Journal of Chinese Universities, 20, (2), 204-208, (1999)

Zhou J et al., An acrylamide-based molecularly imprinted polymer for the efficient recognition of optical amino acid hydantoins.
Analytical Communications, 36, (6), 243-246, (1999)

Zhou J et al., Study on the characteristics of molecular recognition of metal-complexing template polymers.
Journal of Analytical Science, 15, (2), 89-93, (1999)

Zhou J et al., Study of the nature of recognition in molecularly imprinted polymer selective for 2-aminopyridine.
Analytica Chimica Acta, 381, (1), 85-91, (1999)

Zhou J et al., A molecularly imprinted polymer receptor for the enantiomeric recognition of amino acid hydantoins mimicking cooperative hydrogen bonds between nucleotide bases.
Chinese Journal of Chemistry, 18, (4), 482-488, (2000)

Zhou J et al., Enantiomeric recognition of continuous molecularly imprinted polymer rod prepared by in-situ method.
Chinese Journal of Analytical Chemistry, 28, (3), 296-299, (2000)

Guo HS et al., Characteristics of molecular recognition of norfloxacin template polymer.
Chinese Journal of Analytical Chemistry, 29, (2), 128-132, (2001)

Gao JG et al., Characteristics of molecular recognition of plant hormone H-1-indole-3-acetic acid molecular template polymer.
Chinese Journal of Analytical Chemistry, 31, (10), 1173-1177, (2003)

Chen CB et al., A 9-vinyladenine-based molecularly imprinted polymeric membrane for the efficient recognition of plant hormone 1H-indole-3-acetic acid.
Analytica Chimica Acta, 569, (1-2), 58-65, (2006)

Qu XJ et al., Transport Selectivity of a Diethylene Glycol Dimethacrylate-Based Thymine-imprinted Polymeric Membrane over a Cellulose Support for Nucleic Acid Bases.
Chinese Journal of Chemistry, 25, (2), 213-218, (2007)

Gao JG et al., Synthesis of a Long Side Chain-Linked and Dually Carboxy Functional Monomer N-(p-Vinylbenzyl)-N, N-bis[2-(3-carboxypropionyloxy)ethyl] amine and Its Application to Recognition of Imprinted Bovine Serum Albumin.
Acta Chimica Sinica, 66, (9), 1067-1073, (2008)

Qu XJ et al., Recognition of 6-benzyladenine using a molecularly imprinted membrane on a cellulose acetate support.
Journal of Analytical Chemistry, 63, (10), 999-1004, (2008)

Liu XF et al., Preparation of a N, O-Bismethacryloyl Ethanolamine-based Tribenuron-methly Imprinted Polymeric Membrane over a Nylon-6 Support and Its Transport Selectivity.
Chemical Journal of Chinese Universities-Chinese, 30, (9), 1717-1723, (2009)

Si BJ et al., New-Generation of Molecular Imprinting Technique.
Progress In Chemistry, 21, (9), 1813-1819, (2009)

Bi W et al., Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste.
Journal of Chromatography B, 878, (24), 2243-2248, (2010)

Liu XF et al., Transport selectivity of tribenuron-methyl imprinted polymer nanowire membrane prepared using N, O-bismethacryloyl ethanolamine as a functional crosslinking monomer.
Journal of Applied Polymer Science, 118, (2), 678-684, (2010)

Chen CB et al., Trace bensulfuron-methyl analysis in tap water, soil, and soybean samples by a combination of molecularly imprinted stir bar sorption extraction and HPLC-UV.
Journal of Applied Polymer Science, 122, (2), 1198-1205, (2011)

Wei CP et al., Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor.
Talanta, 83, (5), 1422-1427, (2011)

Xin JH et al., Determination of Trace Sudan IV Residues in Foods Through Molecularly Imprinted SPE Coupled with LC.
Chromatographia, 73, (3), 235-242, (2011)

Zhao N et al., Preparation of An SPR Sensor Based on Nicosulfuron Molecularly Imprinted Polymer and Its Analytical Application.
Acta Chimica Sinica, 69, (10), 1191-1196, (2011)

Zhou JF

Zhou JF et al., Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear.
Journal of Chromatography A, 1217, (48), 7478-7483, (2010)

Zhou JP

Zhang Y et al., Advances in Drug Delivery System Based on Molecularly Imprinted Polymers.
Chinese Pharmaceutical Journal, 41, (21), 1605-1608, (2006)

Zhou JY

Zhou JY et al., Diblock copolymer nanospheres with porous cores.
Macromolecules, 35, (9), 3690-3696, (2002)

Zhou K

Ma J et al., Study on the preparation of Gatifloxacin imprinted polymers and its binding properties.
Chemistry Bulletin, 73, (5), 455-460, (2010)

Zhou L

Meng Z et al., Beaded molecule imprinted polymer for stereo isomer separation.
Chromatography, 21, (3), 217-219, (2000)

Xie JC et al., Extracting active compounds from herbs using molecular imprinting technology.
Acta Physico-Chimica Sinica, 17, (7), 582-585, (2001)

Xie JC et al., Direct extraction of specific pharmacophoric flavonoids from gingko leaves using a molecularly imprinted polymer for quercetin.
Journal of Chromatography A, 934, (1-2), 1-11, (2001)

Zhou L et al., The application of molecular imprinting technology for Hippophae rhamnoidse Linn. function integrants extraction.
Acta Physico-Chimica Sinica, 18, (9), 808-811, (2002)

Zhou L et al., A capacitive sensor based on molecularly imprinted polymers and poly(p-aminobenzene sulfonic acid) film for detection of pazufloxacin mesilate.
Science in China Series B: Chemistry, 50, (4), 547-553, (2007)

Zhou LL

Guo YX et al., Synthesis of Molecularly Imprinted Polymer Microspheres for Cholesterol and Their Adsorption Property.
The Chinese Journal of Process Engineering, 11, (2), 318-323, (2011)

Zhou LM

Meng ZH et al., Application of molecular imprinting in chiral separation.
Chinese Journal of Analytical Chemistry, 25, (3), 353-354, (1997)

Meng ZH et al., Molecular imprinting of (R)-(+)-a-methylbenzylamine for chiral stationary phase.
Chinese Chemical Letters, 8, 345-346, (1997)

Meng ZH et al., Combined interaction in molecule imprinting chiral stationary phase.
Chinese Journal of Analytical Chemistry, 26, (10), 1251-1253, (1998)

Meng ZH et al., Beaded molecule imprinted polymer for stereo isomer separation.
Chinese Journal of Chromatography, 17, (4), 323-325, (1999)

Meng ZH et al., New cocktail functional monomers in making molecule imprinting polymer with high chiral selectivity.
Progress In Natural Science, 9, 792-795, (1999)

Meng ZH et al., High performance cocktail functional monomer for making molecule imprinting polymer.
Analytical Sciences, 15, (2), 141-144, (1999)

Meng ZH et al., Molecule imprinting chiral stationary phase.
Biomedical Chromatography, 13, (6), 389-393, (1999)

Meng ZH et al., Making high selective molecule imprinting polymer (MIP) in polar solvent.
Chinese Chemical Letters, 10, (1), 69-72, (1999)

Meng ZH et al., Progress of Molecule Imprinting Technique.
Progress In Chemistry, 11, (4), 358-366, (1999)

Wang JF et al., Highly efficient molecule imprinting chiral stationary phase utilizing combined basic functional monomers.
Acta Chimica Sinica, 57, (10), 1147-1151, (1999)

Wang JF et al., Effect of rigidity of the imprinted molecule to chiral separation of molecular imprinting chiral stationary phase.
Chinese Journal of Analytical Chemistry, 27, (12), 1420-1423, (1999)

Meng ZH et al., The structure characterization for molecule imprinting polymers and the thermodynamic study in the chiral separation process.
Chinese Journal of Analytical Chemistry, 28, (8), 1017-1020, (2000)

Wang JF et al., Effect of functional monomer on chiral separation ability of molecular imprinted chiral stationary phase.
Acta Chimica Sinica, 58, (3), 351-355, (2000)

Wang JF et al., Thermodynamic study on separation of molecular imprinting chiral stationary phase.
Chemical Journal of Chinese Universities, 21, (6), 930-933, (2000)

Wang JF et al., Simultaneous chiral separation using a combinatorial molecular imprinting phase.
Chinese Chemical Letters, 11, (1), 65-68, (2000)

Wang JF et al., Novel polymer system for molecular imprinting polymer against amino acid derivatives.
Chinese Journal of Chemistry, 18, (4), 621-625, (2000)

Wang JF et al., Tribasic cross-linker molecular imprinted chiral stationary phase.
Chinese Journal of Analytical Chemistry, 28, (10), 1224-1228, (2000)

Wang JF et al., Simultaneous chiral separation of two pairs of enantiomers using series column of molecular imprinted phase.
Chinese Journal of Analytical Chemistry, 28, (9), 1096-1098, (2000)

Zhou LP

Tang Y et al., Giant Nanotubes Loaded with Artificial Peroxidase Centers: Self-Assembly of Supramolecular Amphiphiles as a Tool To Functionalize Nanotubes.
Angewandte Chemie International Edition, 49, (23), 3920-3924, (2010)

Zhou M

Zhou M et al., Synthesis of human urokinase imprinted polysiloxane polymer.
International Journal of Bio-Chromatography, 6, (1), 1-5, (2001)

Zhou MH

Wang LM et al., Selective separation of lead from aqueous solution with a novel Pb(II) surface ion-imprinted sol-gel sorbent.
Microchimica Acta, 165, (3), 367-372, (2009)

Wang LM et al., Proceeding, Selective Separation of Cd(II) Ion from Aqueous Solution by Cd(II)-Imprinted Polymers,
1-4, (2009)

Zhou Q

Zhang ML et al., On-line solid-phase extraction of ceramides from yeast with ceramide III imprinted monolith.
Journal of Chromatography A, 984, (2), 173-183, (2003)

Zhang H et al., Characterization of molecularly imprinted monolithic column for recognition of melamine.
Chemistry Bulletin, 73, (6), 545-550, (2010)

Jiang JB et al., Novel molecularly imprinted microsphere using a single chiral monomer and chirality-matching (S)-ketoprofen template.
Journal of Chromatography A, 1218, (24), 3763-3770, (2011)

Zhou S

Yang G et al., Adsorption isotherms on aminoantipyrine imprinted polymer stationary phase.
Chromatographia, 58, (1-2), 53-58, (2003)

Zhou SN

Zhou SN et al., Analysis of wheat extracts for ochratoxin A by molecularly imprinted solid-phase extraction and pulsed elution.
Analytical and Bioanalytical Chemistry, 378, (8), 1903-1906, (2004)

Zhou T

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)

Zhou TS

Qu YH et al., Electrochemical Sensor Prepared from Molecularly Imprinted Polymer for Recognition of 1, 3-Dinitrobenzene (DNB).
Chinese Journal of Chemistry, 27, (10), 2043-2048, (2009)

Yang QY et al., Determination of Parathion in Vegetables by Electrochemical Sensor Based on Molecularly Imprinted Polyethyleneimine/Silica Gel Films.
Journal of Agricultural and Food Chemistry, 57, (15), 6558-6563, (2009)

Liang Y et al., Composites of Polyaniline Nanofibers and Molecularly Imprinted Polymers for Recognition of Nitroaromatic Compounds.
Chemistry - A European Journal, 17, (21), 5989-5997, (2011)

Nie DX et al., Two-dimensional molecular imprinting approach for the electrochemical detection of trinitrotoluene.
Sensors and Actuators B: Chemical, 156, (1), 43-49, (2011)

Zhou W

Huang WH et al., Preparation, Characterization and Performance of a Novel Surfaceimprinting Polymer for the Adsorption of Dibenzothiophene.
Adsorption Science & Technology, 28, (7), 629-640, (2010)

Xu WZ et al., Selective Solid-phase Extraction of Pb(II) Ions Using an Ion-imprinted Functionalized Sodium Trititanate Whisker Adsorbent Prepared by a Surface-imprinting Technique.
Adsorption Science & Technology, 28, (6), 509-519, (2010)

Xu WZ et al., Proceeding, Synthesis, characterization, evaluation of potassium tertatitanium whisker surface Ni(II) ion-imprinted polymers and selective adsorption of nickel,
In: Advanced Materials Research, Du ZY, Sun XB (Eds.), 644-650, (2010)

Zhou WH

Wang HJ et al., Template Synthesized Molecularly Imprinted Polymer Nanotube Membranes for Chemical Separations.
Journal of the American Chemical Society, 128, (50), 15954-15955, (2006)

Lu CH et al., Surface-Imprinted Core-Shell Nanoparticles for Sorbent Assays.
Analytical Chemistry, 79, (14), 5457-5461, (2007)

Li Y et al., Grafting of molecularly imprinted polymers from the surface of silica gel particles via reversible addition-fragmentation chain transfer polymerization: A selective sorbent for theophylline.
Talanta, 79, (2), 141-145, (2009)

Yang HH et al., Molecularly imprinted polymer as SPE sorbent for selective extraction of melamine in dairy products.
Talanta, 80, (2), 821-825, (2009)

Li LL et al., Synthesis of Domoic Acid Imprinted Polymer and Its Extraction Application.
Chinese Journal of Applied Chemistry, 27, (2), 132-136, (2010)

Li Y et al., Preparation of Molecularly Imprinted Polymer Films Modified Silica gel and its Extraction Application.
Chinese Journal of Applied Chemistry, 27, (1), 102-106, (2010)

Zhou WH et al., Mussel-inspired molecularly imprinted polymer coating superparamagnetic nanoparticles for protein recognition.
Journal of Materials Chemistry, 20, (4), 880-883, (2010)

Zhou WH et al., A quartz crystal microbalance sensor based on mussel-inspired molecularly imprinted polymer.
Biosensors and Bioelectronics, 26, (2), 585-589, (2010)

Zhou X

Lv YQ et al., Selective recognition and large enrichment of dimethoate from tea leaves by molecularly imprinted polymers.
Biochemical Engineering Journal, 36, (3), 221-229, (2007)

Zhou X et al., Recent Advances in the Study of Protein Imprinting.
Separation & Purification Reviews, 36, (4), 257-283, (2007)

Zhou XC

Cao L et al., Enantioselective sensor based on microgravimetric quartz crystal microbalance with molecularly imprinted polymer film.
Analyst, 126, (2), 184-188, (2001)

Zhou XD

Feng LA et al., The fabrication and characterization of a formaldehyde odor sensor using molecularly imprinted polymers.
Journal of Colloid and Interface Science, 284, (2), 378-382, (2005)

Zhou XF

Dai CM et al., Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres.
Environmental Pollution, 159, (6), 1660-1666, (2011)

Zhou XG

Chen YJ et al., Preparation of molecularly imprinted microspheres against caffeine by aqueous micro-suspension polymerization and its recognition characterstics.
Chinese Traditional and Herbal Drugs, 36, (5), 692-695, (2005)

Liu M et al., A Novel Synthesized Schistosoma japonicum Miracidium Attractant Imprinted Polymer.
Chinese Journal of Parasitology and Parasitic Diseases, 24, (6), 479-480, (2006)

Zhou XM

Ding MJ et al., Synthesis of core-shell magnetic molecularly imprinted polymers and detection of sildenafil and vardenafil in herbal dietary supplements.
Journal of Hazardous Materials, 191, (1-3), 177-183, (2011)

Ma J et al., The study of core-shell molecularly imprinted polymers of 17[beta]-estradiol on the surface of silica nanoparticles.
Biosensors and Bioelectronics, 26, (5), 2791-2795, (2011)

Zhou XZ

Zhou XZ et al., Synthesis of molecularly imprinted polymer membranes and their application to the selective transport of targeted molecules.
Abstracts of Papers of the American Chemical Society, 221, (ORGN), 377-377, (2001)

Zhou Y

Hao LY et al., Fabrication of ordered macroporous CdS and ZnS by colloidal crystal template.
Chinese Chemical Letters, 13, (2), 181-182, (2002)

Zhou Y et al., Application of molecular imprinting technology in the separation and purification of active ingredients from natural products.
Chinese Journal of Chromatography, 27, (3), 359-363, (2009)

Zhou YK

Liu M et al., A Novel Synthesized Schistosoma japonicum Miracidium Attractant Imprinted Polymer.
Chinese Journal of Parasitology and Parasitic Diseases, 24, (6), 479-480, (2006)

Jing T et al., Preparation of high selective molecularly imprinted polymers for tetracycline by precipitation polymerization.
Chinese Chemical Letters, 18, (12), 1535-1538, (2007)

Dai Q et al., Preparation and evaluation of Sudan Red I molecularly imprinted polymer.
Chinese Journal of Chromatography, 27, (6), 764-768, (2009)

Jing T et al., Determination of trace tetracycline antibiotics in foodstuffs by liquid chromatography–tandem mass spectrometry coupled with selective molecular-imprinted solid-phase extraction.
Analytical and Bioanalytical Chemistry, 393, (8), 2009-2018, (2009)

Jing T et al., Preparation of mixed-templates molecularly imprinted polymers and investigation of the recognition ability for tetracycline antibiotics.
Biosensors and Bioelectronics, 25, (10), 2218-2224, (2010)

Jing T et al., Magnetic molecularly imprinted nanoparticles for recognition of lysozyme.
Biosensors and Bioelectronics, 26, (2), 301-306, (2010)

Jing T et al., Determination of trace 2, 4-dinitrophenol in surface water samples based on hydrophilic molecularly imprinted polymers/nickel fiber electrode.
Biosensors and Bioelectronics, 26, (11), 4450-4456, (2011)

Jing T et al., Rapid and selective determination of urinary lysozyme based on magnetic molecularly imprinted polymers extraction followed by chemiluminescence detection.
Analytica Chimica Acta, 692, (1-2), 73-79, (2011)

Mei SR et al., Determination of trace bisphenol A in complex samples using selective molecularly imprinted solid-phase extraction coupled with capillary electrophoresis.
Microchemical Journal, 98, (1), 150-155, (2011)

Zhou YM

Zhou YM et al., Preparation of bovine serum albumin imprinted polymer on silica surface and its molecular recognition function.
Chinese Journal of Analytical Chemistry, 34, (11), 1551-1554, (2006)

Zhou YM et al., Synthesis and spectral characterization of a novel fluorescent functional monomer 2, 4-dimethyl-7-acrylamine-1, 8-naphthyridine.
Spectroscopy and Spectral Analysis, 26, (3), 496-498, (2006)

Yao QZ et al., Synthesis of TiO2 Hybrid Molecular Imprinted Polymer for Ethofumesate Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 18, (4), 477-484, (2008)

Yao QZ et al., Surface Functional Imprinting of Bensulfuron-methyl at Surface of Silica Nanoparticles Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 19, (2), 215-222, (2009)

Yao QZ et al., Synthesis of TiO2 Hybrid Molecular Imprinted Nanospheres Linked by Silane Coupling Agent.
Journal of Inorganic and Organometallic Polymers and Materials, 19, (4), 466-472, (2009)

Zhang CL et al., Synthesis of molecularly imprinted polymer for Rifampicin and its adsorption.
The Chinese Journal of Process Engineering, 9, (3), 608-612, (2009)

Zhou YM et al., Molecular imprinting-flow injection chemiluminescence method for determination of doxycycline hydrochloride.
Spectroscopy and Spectral Analysis, 29, (7), 1745-1749, (2009)

Zhou YS

Zhou YX

Liu Q et al., Recent progresses in research on molecular imprinting sensors.
Chinese Journal of Analytical Chemistry, 27, (11), 1341-1347, (1999)

Meng ZH et al., The research of adsorption of organophosphorus toxicants on molecule imprinting polymers.
Chinese Journal of Analytical Chemistry, 28, (4), 432-435, (2000)

Liu Q et al., Determination of nerve agent degradation products in rice by molecule imprinting polymer-solid phase extraction and capillary electrophoresis.
Chinese Journal of Analytical Chemistry, 29, (4), 387-390, (2001)

Meng ZH et al., Detection of isopropylmethylphosphonate by the change of tire resistance for the membrane of molecule imprinting polymer.
Chinese Journal of Analytical Chemistry, 29, (4), 490-490, (2001)

Zhou YX et al., Chiral selective molecular sensors for amino acids by electrochemical detection.
Abstracts of Papers of the American Chemical Society, 221, (ANYL), 31-31, (2001)

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (COLL), 495-495, (2003)

Zhou YX et al., Potentiometric sensing of chiral amino acids.
Chemistry of Materials, 15, (14), 2774-2779, (2003)

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, 225, (ANYL), 132-132, (2003)

Zhou YX et al., Potentiometric sensor for dipicolinic acid.
Abstracts of Papers of the American Chemical Society, 228, (ANYL), 054-054, (2004)

Zhou YX et al., Molecular imprinting by surface polymerization.
Abstracts of Papers of the American Chemical Society, 227, (COLL), 545-545, (2004)

Zhou YX et al., Surface imprinted polymer for development of a sensor for methylphosphonic acid: A degradation product of chemical warfare agents.
Abstracts of Papers of the American Chemical Society, 227, (COLL), 531-531, (2004)

Zhou YX et al., Potentiometric sensing of chemical warfare agents: Surface imprinted polymer integrated with an indium tin oxide electrode.
Analytical Chemistry, 76, (10), 2689-2693, (2004)

Zhou YX et al., Potentiometric sensor for dipicolinic acid.
Biosensors and Bioelectronics, 20, (9), 1851-1855, (2005)

Zhou YX et al., Chemical and biological agent sensor development based on surface imprinted polysiloxane.
Abstracts of Papers of the American Chemical Society, 230, 4-MACR, (2005)

Zhou YX et al., Is it possible to construct molecular cavities on surface by SAM? Surface imprinted polymers (SIPs) for next generation sensor development.
Abstracts of Papers of the American Chemical Society, 230, 238-COLL, (2005)

Zhou YX et al., Chiral surface imprinting: Integrated recognition and transduction.
Abstracts of Papers of the American Chemical Society, ANYL, (225), 132-132, (2006)

Wang YT et al., A potentiometric protein sensor built with surface molecular imprinting method.
Biosensors and Bioelectronics, 24, (1), 162-166, (2008)

Zhou Z

Sun XY et al., Preparation and properties of dibutyltin molecularly imprinted polymer.
Chemical Journal of Chinese Universities, 27, (8), 1443-1447, (2006)

Zhou Z et al., Synthesis and Recognition Capability of Monobutyltin Molecularly Imprinted Polymer.
Journal of Huaqiao University (Natural Science), 28, (1), 38-41, (2007)

Zhou ZH

Liu J et al., The Research of Fluorescent Sensing to Endocrine Disruptor 17ß-Estradiol Measured by Microsphere Molecularly Imprinted Polymer.
Research of Environmental Sciences, 19, (5), 91-95, (2006)

Zhou ZL

Tan YG et al., A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine.
Talanta, 55, (2), 337-347, (2001)

Zhou ZM

Meng ZH et al., Application of Molecularly Imprinted Solid Phase Extraction in the Assay of Environmental Samples.
Chinese Journal of Chromatography, 24, (6), 551-554, (2006)

Zhang QY et al., Absorption of TNT by Molecularly Imprinted Polymer.
Chinese Journal of Explosives & Propellants, 30, (1), 64-66, (2007)

Zhou ZQ

Zhang HT et al., Food safety: Monitoring of organophosphate pesticide residues in crops and food.
Phosphorus Sulfur And Silicon And The Related Elements, 183, (2-3), 280-290, (2008)

Zhu B

Lou DW et al., Preparation of Benzoic Acid Molecularly Imprinted Polymers and Its Adsorption Property.
Chinese Journal of Analytical Chemistry, 38, (3), 401-404, (2010)

Zhu BH

Long CY et al., Determination of multi-residue for malachite green, gentian violet and their metabolites in aquatic products by high-performance liquid chromatography coupled with molecularly imprinted solid-phase extraction.
Journal of Chromatography A, 1216, (12), 2275-2281, (2009)

Long CY et al., Synthesis and characterization of a novel molecularly imprinted polymer for simultaneous extraction and determination of water-soluble and fat-soluble synthetic colorants in chilli products by solid phase extraction and high performance liquid chromatography.
Journal of Chromatography A, 1216, (47), 8379-8385, (2009)

Zhu CY

Shi RX et al., The development of research in molecular imprinting technique.
Progress In Chemistry, 14, (3), 182-191, (2002)

Zhu D

Meng Z et al., Beaded molecule imprinted polymer for stereo isomer separation.
Chromatography, 21, (3), 217-219, (2000)

Zhu DQ