A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
M:
N:
O:
P:
Q:
R:
S:
T:
U:
V:
W:
X:
Y:
Z:
go to papers
go to Journals
go to authors
go to templates and targets
switch to patents
switch to inventors
switch to theses and dissertations
back to top
RSS feed
This file created: 09/07/2011
This index is currently under construction, more items will be added soon.
ibuprofen
Farrington K et al., Molecularly imprinted sol gel for ibuprofen: An analytical study of the factors influencing selectivity.
Talanta, 78, (3), 653-659, (2009)
ibuprofen
Kochkodan V et al., Selective recognition of organic pollutants in aqueous solutions with composite imprinted membranes.
Advances in Colloid and Interface Science, 159, (2), 180-188, (2010)
ibuprofen
Spégel P et al., Novel Vinylpyridine Based Cationic MIP Monoliths for Enantiomer Separation in CEC.
Chromatographia, 69, (3), 277-285, (2009)
ICP-AES
Chang XJ et al., Silica gel surface-imprinted solid-phase extraction of Zr(IV) from aqueous solutions.
Microchimica Acta, 162, (1), 113-119, (2008)
ICP-AES
Fasihi J et al., Adsorption of uranyl ion onto an anthraquinone based ion-imprinted copolymer.
Reactive and Functional Polymers, 71, (8), 803-808, (2011)
ICP-AES
He Q et al., Determination of chromium(III) and total chromium in natural waters using a surface ion-imprinted silica gel as selective adsorbent.
International Journal of Environmental Analytical Chemistry, 88, (6), 373-384, (2008)
ICP-MS
Zhang N et al., Chromium(III)-imprinted silica gel for speciation analysis of chromium in environmental water samples with ICP-MS detection.
Talanta, 75, (2), 536-543, (2008)
ICP-OES
Zheng H et al., Selective Solid-phase Extraction of Hg(II) Using Silica Gel Surface - Imprinting Technique.
Chemia Analityczna, 53, (5), 673-687, (2008)
ICP-OES
Zhu XB et al., Selective solid-phase extraction of lead(II) from biological and natural water samples using surface-grafted lead(II)-imprinted polymers.
Microchimica Acta, 164, (1), 125-132, (2009)
IIP
Özkütük EB et al., Preconcentration of phosphate ion onto ion-imprinted polymer.
Journal of Hazardous Materials, 157, (1), 130-136, (2008)
Illicit drugs
González-Marińo I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)
Imidacloprid
Tang JS et al., Development and Application of Molecularly Imprinted Polymer as Solid Phase Extraction of Imidacloprid in Environmental Samples.
Journal Of Liquid Chromatography & Related Technologies, 32, (1), 59-71, (2009)
imidazole
Zhu GF et al., Synthesis of surface molecularly imprinted polymer and the selective solid phase extraction of imidazole from its structural analogs.
Talanta, 84, (4), 1124-1132, (2011)
Iminodiacetate
Bhaskarapillai A et al., Theoretical investigations of the experimentally observed selectivity of a cobalt imprinted polymer.
Biosensors and Bioelectronics, 25, (3), 558-562, (2009)
Imipramine
Xu XL et al., A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles.
Talanta, 78, (1), 26-32, (2009)
immobilisation
Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
immobilization
Okutucu B et al., Immobilization of α-galactosidase on galactose-containing polymeric beads.
Enzyme and Microbial Technology, 46, (3-4), 200-205, (2010)
immobilization
Yan JY et al., Combined strategy for preparation of a bioimprinted Geotrichum sp. lipase biocatalyst effective in non-aqueous media.
Process Biochemistry, 44, (10), 1128-1132, (2009)
immune system in a bottle and on a leash
Book chapter, Dunn IS, Evolving and Creating Recognition Molecules,
In: Searching for Molecular Solutions - Empirical Discovery and its Future,
John Wiley & Sons Inc.: Hoboken, 234-274, (2009)
immunoassay
Fodey T et al., Developments in the production of biological and synthetic binders for immunoassay and sensor-based detection of small molecules.
TrAC Trends in Analytical Chemistry, 30, (2), 254-269, (2011)
immunoassay
Sun FX et al., Analytical methods and recent developments in the detection of melamine.
TrAC Trends in Analytical Chemistry, 29, (11), 1239-1249, (2010)
immunoassay
Tsai HH et al., Multiple type biosensors fabricated using the CMOS BioMEMS platform.
Sensors and Actuators B: Chemical, 144, (2), 407-412, (2010)
immunoassay
Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
immunoassays
Ge Y et al., Molecularly Imprinted Sorbent Assays: Recent Developments and Applications.
Chemistry - A European Journal, 15, (33), 8100-8107, (2009)
immunoextraction
Potter OG et al., Porous polymer monoliths for extraction: Diverse applications and platforms.
Journal of Separation Science, 31, (11), 1881-1906, (2008)
Immunoglobulin
Lieberzeit PA et al., Functional Materials for Biosensing-From Proteins to Cells and Pollen.
Sensor Letters, 6, (4), 641-645, (2008)
Immunoglobulin
Schirhagl R et al., Antibodies and Their Replicae in Microfluidic Sensor Systems-Labelfree Quality Assessment in Food Chemistry and Medicine.
Sensor Letters, 8, (3), 399-404, (2010)
immunoglobulin G
Nematollahzadeh A et al., High-Capacity Hierarchically Imprinted Polymer Beads for Protein Recognition and Capture.
Angewandte Chemie International Edition, 50, (2), 495-498, (2011)
Immunoglobulins
Schirhagl R et al., Chemosensors for Viruses Based on Artificial Immunoglobulin Copies.
Advanced Materials, 22, (18), 2078-2081, (2010)
immunosensor
Skottrup PD et al., Towards on-site pathogen detection using antibody-based sensors.
Biosensors and Bioelectronics, 24, (3), 339-348, (2008)
immunosensors
Trojanowicz M et al., Electrochemical Chiral Sensors and Biosensors.
Electroanalysis, 21, (3-5), 229-238, (2009)
immunosorbents
Cruz-Vera M et al., Highly selective and non-conventional sorbents for the determination of biomarkers in urine by liquid chromatography.
Analytical and Bioanalytical Chemistry, 397, (3), 1029-1038, (2010)
immunosorbents
Mmualefe LC et al., Environmental and food sample handling challenges for developing countries.
Toxicological & Environmental Chemistry, 91, (5), 819-835, (2009)
Impedance
Gupta G et al., Molecularly imprinted polymer for the recognition of biological warfare agent staphylococcal enterotoxin B based on Surface Plasmon Resonance.
Thin Solid Films, 519, (3), 1115-1121, (2010)
Impedance
Gupta G et al., Supersensitive detection of T-2 toxin by the in situ synthesized π-conjugated molecularly imprinted nanopatterns. An in situ investigation by surface plasmon resonance combined with electrochemistry.
Biosensors and Bioelectronics, 26, (5), 2534-2540, (2011)
impedance spectroscopy
Broeders J et al., Miniaturised eight-channel impedance spectroscopy unit as sensor platform for biosensor applications.
physica status solidi (a), 208, (6), 1357-1363, (2011)
impedance spectroscopy
Horemans F et al., MIP-based sensor platforms for the detection of histamine in the nano- and micromolar range in aqueous media.
Sensors and Actuators B: Chemical, 148, (2), 392-398, (2010)
impedance spectroscopy
Thoelen R et al., A MIP-based impedimetric sensor for the detection of low-MW molecules.
Biosensors and Bioelectronics, 23, (6), 913-918, (2008)
Impeller
Lee JS et al., Preparation of D-phenylalanine imprinted microbeads by the modified suspension polymerization using a magnetic impeller.
Korean Journal Of Chemical Engineering, 26, (2), 453-456, (2009)
Impregnation medium
Song H et al., The role of impregnation medium on the activity of ceria-supported cobalt catalysts for ethanol steam reforming.
Journal of Molecular Catalysis A: Chemical, 318, (1-2), 21-29, (2010)
Impression 2D de surface
Hillberg AL et al., Biomolecule imprinting: Developments in mimicking dynamic natural recognition systems.
ITBM-RBM, 29, (2-3), 89-104, (2008)
imprint
Melde BJ et al., Mesoporous materials in sensing: morphology and functionality at the meso-interface.
Analytical and Bioanalytical Chemistry, 398, (4), 1565-1573, (2010)
imprint
Xiao L et al., Preparation of surface ion imprinting magnetic chitosan nanoparticles and adsorption of Cu(II) ions.
Ion Exchange and Adsorption, 24, (3), 193-199, (2008)
imprinted catalyst
Li SJ et al., ’On/off’-switchable catalysis by a smart enzyme-like imprinted polymer.
Journal of Catalysis, 278, (2), 173-180, (2011)
Imprinted chitooligosaccharide
Zhang XF et al., Protective effects of ion-imprinted chitooligosaccharides as uranium-specific chelating agents against the cytotoxicity of depleted uranium in human kidney cells.
Toxicology, 286, (1-3), 75-84, (2011)
Imprinted electrochemical sensor
Hu YF et al., Imprinted sol-gel electrochemical sensor for the determination of benzylpenicillin based on Fe3O4@SiO2/multi-walled carbon nanotubes-chitosans nanocomposite film modified carbon electrode.
Analytica Chimica Acta, 698, (1-2), 61-68, (2011)
Imprinted electrodes
Buica GO et al., Poly(pyrrole-EDTA like) modified electrodes for mercury ions electroanalysis.
Journal of Optoelectronics and Advanced Materials, 11, (8), 1152-1159, (2009)
imprinted hybrid film
Proceeding, Tao YG et al, Pb (II)-Imprinted Chitosan/TiO2 Hybrid Film for High Selectivity of Adsorption Lead Ion in Aqueous Solution,
In: Advanced Materials Research, Jiang ZY, Han JT, Liu XH (Eds.),
484-488, (2010)
Imprinted hydrogels
El-Arnaouty MB, Radiation Synthesis and Characterization Study of Imprinted Hydrogels for Metal Ion Adsorption.
Polymer-Plastics Technology and Engineering, 49, (10), 963-971, (2010)
Imprinted hydrogels
Stannek M et al., Molecular Recognition Within Imprinted PVA/PAA Hydrogels.
Chemie Ingenieur Technik, 80, (9), 1440-1440, (2008)
Imprinted ionic
Buhani et al., Adsorption kinetics and isotherm of Cd(II) ion on Nannochloropsis sp biomass imprinted ionic polymer.
Desalination, 259, (1-3), 140-146, (2010)
Imprinted mechanism
Cai ZF et al., The imprinted mechanism of metallothionein-imprinted polymers.
Iranian Polymer Journal (English Edition), 17, (4), 289-296, (2008)
Imprinted Membrane
Proceeding, Bing NC et al, Controlled grafting of S-naproxen imprinted layer on PVDF microporous membrane by ATRP,
In: Advanced Materials Research, Liu XH, Jiang ZY, Han JT (Eds.),
1026-1030, (2010)
Imprinted Membrane
Ul-Haq N et al., Chiral resolution of phenylalanine by d-Phe imprinted membrane considering rejection property.
Bioprocess and Biosystems Engineering, 33, (1), 79-86, (2010)
Imprinted Membrane
Zhang QQ et al., Imprinting Effect Inducing Crystallization of Uracil on Polymer Membrane Prepared in Supercritical CO2 Phase Inversion.
Journal of Chemical Engineering of Japan, 42, (1), 21-28, (2009)
Imprinted membranes
Donato L et al., Surface Functionalization of PVDF Membrane with a Naringin-Imprinted Polymer Layer Using Photo-Polymerization Method.
Separation Science And Technology, 46, (10), 1555-1562, (2011)
Imprinted membranes
Pegoraro C et al., Molecularly imprinted poly(ethylene-co-vinyl alcohol) membranes for the specific recognition of phospholipids.
Biosensors and Bioelectronics, 24, (4), 748-755, (2008)
Imprinted microsphere
Feng QZ et al., Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)
Imprinted microspheres
Qiao JD et al., Simultaneous Determination of Four Sudan Dyes in Egg Yolks by Molecularly Imprinted SPE Coupled with LC-UV Detection.
Chromatographia, 73, (3), 227-233, (2011)
imprinted polyethersulfone particles
Yu BY et al., Effect of the template molecules and nonsolvent additives on the recognition property of molecular imprinted polyethersulfone particles.
Journal of Applied Polymer Science, 108, (6), 3859-3866, (2008)
imprinted polymer
Alizadeh T et al., Preparation of nano-sized Pb2+ imprinted polymer and its application as the chemical interface of an electrochemical sensor for toxic lead determination in different real samples.
Journal of Hazardous Materials, 190, (1-3), 451-459, (2011)
imprinted polymer
Alizadeh T et al., A carbon paste electrode impregnated with Cd2+ imprinted polymer as a new and high selective electrochemical sensor for determination of ultra-trace Cd2+ in water samples.
Journal of Electroanalytical Chemistry, 657, (1-2), 98-106, (2011)
imprinted polymer
BelBruno JJ et al., Amazing pores: Processing, morphology and functional states of molecularly imprinted polymers as sensor materials.
Molecular Crystals And Liquid Crystals, 483, 179-190, (2008)
imprinted polymer
Bhaskarapillai A et al., Theoretical investigations of the experimentally observed selectivity of a cobalt imprinted polymer.
Biosensors and Bioelectronics, 25, (3), 558-562, (2009)
imprinted polymer
Buica GO et al., Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA-like) Film Modified Electrode.
Electroanalysis, 21, (1), 77-86, (2009)
imprinted polymer
Cai ZF et al., The imprinted mechanism of metallothionein-imprinted polymers.
Iranian Polymer Journal (English Edition), 17, (4), 289-296, (2008)
imprinted polymer
Dam AH et al., Metal ion-imprinted polymer microspheres derived from copper methacrylate for selective separation of heavy metal ions.
Journal of Applied Polymer Science, 108, (1), 14-24, (2008)
imprinted polymer
Dima SO et al., Proofs for molecular imprinting of an acrylic copolymer by phase inversion.
UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 71, (4), 21-30, (2009)
imprinted polymer
Dima SO et al., Molecularly Imprinted Membranes for Selective Separations.
Materiale Plastice, 46, (4), 372-378, (2009)
imprinted polymer
Dinçer A et al., Preparation of glutathione imprinted polymer.
Preparative Biochemistry and Biotechnology, 40, (3), 188-197, (2010)
imprinted polymer
Fan PM et al., Molecular Recognition Characteristics of Quercetin’s Metal-complexing Imprinted Polymer.
Chemical Journal of Chinese Universities, 30, (12), 2514-2520, (2009)
imprinted polymer
Garde-Cerdán T et al., Molecularly Imprinted Polymer-Assisted Simple Clean-Up of 2,4,6-Trichloroanisole and Ethylphenols from Aged Red Wines.
American Journal of Enology and Viticulture, 59, (4), 396-400, (2008)
imprinted polymer
Gawin M et al., Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry.
Talanta, 80, (3), 1305-1310, (2010)
imprinted polymer
Gómez-Pineda LE et al., Quantum Chemical Calculations on the Interaction between Flavonol and Functional Monomers (Methacrylic Acid and 4-Vinylpyridine) in Molecularly Imprinted Polymers.
Molecules, 15, (6), 4017-4032, (2010)
imprinted polymer
Hoai NT et al., Batch and column separation characteristics of copper-imprinted porous polymer micro-beads synthesized by a direct imprinting method.
Journal of Hazardous Materials, 173, (1-3), 462-467, (2010)
imprinted polymer
Khajeh M et al., Synthesis, characterization and removal of lead from water samples using lead-ion imprinted polymer.
Chemical Engineering Journal, 166, (3), 1158-1163, (2011)
imprinted polymer
Khajeh M et al., Synthesis of ion-selective imprinted polymer for manganese removal from environmental water.
Polymer Bulletin, 67, (3), 413-425, (2011)
imprinted polymer
Medina-Castillo AL et al., A semi-empirical model to simplify the synthesis of homogeneous and transparent cross-linked polymers and their application in the preparation of optical sensing films.
Biosensors and Bioelectronics, 25, (2), 442-449, (2009)
imprinted polymer
Meng AC et al., Multi-analyte imprinting capability of OMNiMIPs versus traditional molecularly imprinted polymers.
Journal of Molecular Recognition, 22, (2), 121-128, (2009)
imprinted polymer
Nateghi MR et al., Imprinted Poly(o-phenylenediamine-co-aniline) Electrode for Warfarin Assay in Human Samples by Differential Pulse Voltammetry.
Asian Journal of Chemistry, 22, (5), 3516-3524, (2010)
imprinted polymer
Nicolescu TV et al., Influence of crosslinker/porogen ratio upon imprinted polymer parameters.
U. P. B. Science Bulletin, Series B, 73, (1), 163-172, (2011)
imprinted polymer
Özkahraman B et al., Synthesis of Zn(II) Ion-Imprinted Polymeric Adsorbent for Selective Removal of Zinc from Aqueous Solutions.
Polymer-Plastics Technology and Engineering, 50, (2), 216-219, (2011)
imprinted polymer
Riahi S et al., Computational Approach to Investigation of Template/Monomer Complex in Imprinted Polymers; Dinitrobenzene Sensor.
International Journal of Electrochemical Science, 5, (4), 509-516, (2010)
imprinted polymer
Sun SD et al., Polymeric Particles for the Removal of Endocrine Disruptors.
Separation & Purification Reviews, 40, (4), 312-337, (2011)
imprinted polymer
Wen QA et al., Microwave-assisted Heating for Rapid Preparation and On-line Enrichment Application of Core-shell Uridine Imprinted Polymer.
Acta Chimica Sinica, 69, (2), 209-214, (2011)
Imprinted polymerized organogels
Zhang SZ et al., Cholesterol Imprinted Polymerized Organogel Formed by Polymerizable Gelator and Adsorption Ability.
Acta Polymerica Sinica, (3), 244-248, (2009)
imprinted polymer membrane
Fan PM et al., Preparation of molecularly imprinted polymer membrane with blending trimethoprim-MIP and polysulfone and its transport properties.
Korean Journal Of Chemical Engineering, 26, (6), 1813-1820, (2009)
imprinted polymer membrane
Liu W et al., Preparation and application of Norfloxacin-MIP/polysulfone blending molecular imprinted polymer membrane.
Journal of Applied Polymer Science, 113, (2), 1125-1132, (2009)
Imprinted polymer microsphere
Zhang W et al., Synthesis of salicylic acid imprinted polymer microspheres via emulsion polymerization.
Journal of Chemical Industry and Engineering (China), 59, (6), 1551-1555, (2008)
imprinted polymers
Cirillo G et al., Imprinted hydrophilic nanospheres as drug delivery systems for 5-fluorouracil sustained release.
Journal of Drug Targeting, 17, (1), 72-77, (2009)
imprinted polymers
Cizmárik A et al., Studies of local anesthetics. Part: 187 Extraction of 1-methyl-2- piperidinoethylesters of alkoxyphenylcarbamic acids from human plasma by imprinted polymers and its comparison with classic solid phase extraction.
Ceska a Slovenska Farmacie, 58, (2), 78-82, (2009)
imprinted polymers
Pereira E et al., Complexing Polymer Films in The Preparation of Modified Electrodes for Detection of Metal Ions.
Macromolecular Symposia, 304, (1), 115-125, (2011)
imprinted polymers
Pereira LA et al., Molecularly imprinted solid-phase extraction for the determination of fenitrothion in tomatoes.
Analytical and Bioanalytical Chemistry, 393, (3), 1063-1072, (2009)
imprinted polymers
Rao TP et al., Potentiometric transducer based biomimetic sensors for priority envirotoxic markers--An overview.
Talanta, 76, (3), 485-496, (2008)
imprinted polymers
Willner I et al., Electroanalytical Applications of Metallic Nanoparticles and Supramolecular Nanostructures.
Electroanalysis, 23, (1), 13-28, (2011)
Imprinted poly(tetraethoxysilanol)
Tsai HA et al., Preparation of imprinted poly(tetraethoxysilanol) sol-gel for the specific uptake of creatinine.
Chemical Engineering Journal, 168, (3), 1369-1376, (2011)
Imprinted self-assembled monolayer
Vikholm-Lundin I et al., A comparative evaluation of molecular recognition by monolayers composed of synthetic receptors or oriented antibodies.
Biosensors and Bioelectronics, 24, (4), 1036-1038, (2008)
imprinted silica gel
de Avila TC et al., Employ of Silica Gel Organically Modified and Ionically Imprinted for Selective On-Line Preconcentration of Copper Ions.
Quimica Nova, 33, (2), 301-308, (2010)
imprinted sol-gel
Hu YF et al., Electrochemical determination of l-phenylalanine at polyaniline modified carbon electrode based on β-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film.
Talanta, 84, (2), 305-313, (2011)
imprinted sol-gel
Zhang ZH et al., Novel Layer-by-layer Assembly Multi-walled Carbon Nanotube/Resveratrol Imprinted Sol-gel Electrochemical Sensor.
Acta Chimica Sinica, 68, (5), 431-436, (2010)
Imprinted sol-gel
Zhang ZH et al., Electrochemical layer-by-layer modified imprinted sensor based on multi-walled carbon nanotubes and sol-gel materials for sensitive determination of thymidine.
Journal of Electroanalytical Chemistry, 644, (1), 7-12, (2010)
Imprinted sol-gels
Guardia L et al., Role of surface adsorption and porosity features in the molecular recognition ability of imprinted sol-gels.
Biosensors and Bioelectronics, 23, (7), 1101-1108, (2008)
Imprinted sol-gel sensor
Zhang ZH et al., Novel layer-by-layer assembly molecularly imprinted sol-gel sensor for selective recognition of clindamycin based on Au electrode decorated by multi-wall carbon nanotube.
Journal of Colloid and Interface Science, 344, (1), 158-164, (2010)
Imprinted solid-phase extraction
Koohpaei AR et al., Molecular Imprinted Solid Phase Extraction for Determination of Atrazine in Environmental Samples.
Iranian Journal of Environmental Health Science & Engineering, 5, (4), 283-296, (2008)
Imprinted sorbent
Xie FZ et al., Preparation of Pb2+ Double-template Imprinted Sorbent for Selective Separation of Pb2+ from Environmental Water and Sediment Samples.
Chinese Journal of Analytical Chemistry, 39, (1), 77-81, (2011)
Imprinted submicrosphere
Feng QZ et al., Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1419-1429, (2008)
imprinting
Arrachart G et al., Silylated Melamine and Cyanuric Acid as Precursors for Imprinted and Hybrid Silica Materials with Molecular Recognition Properties.
Chemistry - A European Journal, 15, (25), 6279-6288, (2009)
imprinting
Huang X et al., Incorporation of glutathione peroxidase active site into polymer based on imprinting strategy.
Biosensors and Bioelectronics, 25, (3), 657-660, (2009)
imprinting
Ikeda Y et al., Synthesis of a trisulfated heparan sulfate disaccharide analog and its use as a template for preliminary molecular imprinting studies.
Carbohydrate Research, 343, (4), 587-595, (2008)
imprinting
Janiak DS et al., Effects of charge density on the recognition properties of molecularly imprinted polyampholyte hydrogels.
Polymer, 51, (3), 665-670, (2010)
imprinting
Kamel AH et al., Flow-Through Assay of Quinine Using Solid Contact Potentiometric Sensors Based on Molecularly Imprinted Polymers.
Electroanalysis, 21, (24), 2701-2708, (2009)
imprinting
Kung HH et al., Synthesis Strategies to Design Structures for Catalytic Applications.
Chinese Journal of Catalysis, 29, (11), 1187-1192, (2008)
imprinting
Li L et al., Preparation of Core-shell Magnetic Molecularly Imprinted Polymer Nanoparticles for Recognition of Bovine Hemoglobin.
Chemistry - An Asian Journal, 4, (2), 286-293, (2009)
imprinting
Liang Y et al., Composites of Polyaniline Nanofibers and Molecularly Imprinted Polymers for Recognition of Nitroaromatic Compounds.
Chemistry - A European Journal, 17, (21), 5989-5997, (2011)
imprinting
Lin YF et al., On-surface Cyclization of Tetrapeptides using Molecularly Imprinted Polymers as Non-covalent Auxiliaries.
Journal of the Chinese Chemical Society, 56, (1), 127-134, (2009)
imprinting
Qin L et al., A Thermosensitive Monolithic Column as an Artificial Antibody for the On-line Selective Separation of the Protein.
Chemistry - A European Journal, 17, (5), 1696-1704, (2011)
imprinting
Qiu HB et al., Supramolecular Chiral Transcription and Recognition by Mesoporous Silica Prepared by Chiral Imprinting of a Helical Micelle.
Angewandte Chemie International Edition, 48, (17), 3069-3072, (2009)
imprinting
Ren YM et al., Preparation of Cu(II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (5), 680-685, (2009)
imprinting
Ren YM et al., Characters of Cu(II) ion imprinted magnetic composite adsorbent.
Material Science and Technology, 17, (6), 801-805, (2009)
imprinting
Riskin M et al., Imprinted Au-Nanoparticle Composites for the Ultrasensitive Surface Plasmon Resonance Detection of Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX).
Advanced Materials, 22, (12), 1387-1391, (2010)
imprinting
Shin MJ et al., Sensing capability of molecularly imprinted self-assembled monolayer.
Biochemical Engineering Journal, 54, (1), 57-61, (2011)
imprinting
Tan J et al., A fluorescent sensor array based on ion imprinted mesoporous silica.
Biosensors and Bioelectronics, 24, (11), 3316-3321, (2009)
imprinting
Tsvelikhovsky D et al., Forcing a cis-Product by Matrix Imprinting: Heck Reaction Catalyzed by Palladium Acetate Entrapped within cis-Imprinted Sol-Gel Derived Silicates.
Advanced Synthesis & Catalysis, 350, (18), 2856-2858, (2008)
imprinting
Yang LB et al., Ultrasensitive SERS Detection of TNT by Imprinting Molecular Recognition Using a New Type of Stable Substrate.
Chemistry - A European Journal, 16, (42), 12683-12693, (2010)
imprinting
Ying XG et al., Preparation and characterization of protein imprinted agarose microspheres.
Polymer Bulletin, 65, (3), 245-263, (2010)
imprinting
Zhang HB et al., Preparation and adsorption properties of p-nitrophenol imprinted materials based on multi-walled carbon nanotubes surface.
Chemical Journal of Chinese Universities, 31, (11), 2141-2147, (2010)
imprinting
Zhang W et al., Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c.
Biosensors and Bioelectronics, 26, (5), 2553-2558, (2011)
imprinting
Zhao YJ et al., Multiplex Label-Free Detection of Biomolecules with an Imprinted Suspension Array.
Angewandte Chemie International Edition, 48, (40), 7350-7352, (2009)
Imprinting approaches
Sousa MD et al., Molecularly imprinted polymers for controlling drug release. Part 1: Synthesis and characterization.
Quimica Nova, 32, (6), 1609-1619, (2009)
Imprinting effect
Athikomrattanakul U et al., Development of molecularly imprinted polymers for the binding of nitrofurantoin.
Biosensors and Bioelectronics, 25, (1), 82-87, (2009)
Imprinting effect
Zhang TL et al., Influence of the Number and Relative Position of the Interacting Groups in Template Molecule on Molecular Imprinting Effect.
Chemical Journal of Chinese Universities, 31, (6), 1126-1130, (2010)
imprinting efficiency
Chen PY et al., Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system.
Analytica Chimica Acta, 643, (1-2), 38-44, (2009)
imprinting efficiency
Chen PY et al., A novel molecularly imprinted polymer thin film as biosensor for uric acid.
Talanta, 80, (3), 1145-1151, (2010)
imprinting efficiency
He M et al., Preparation and imprinting efficiency evaluation of molecularly imprinted polymer of apigenin.
Ion Exchange and Adsorption, 26, (6), 514-523, (2010)
imprinting efficiency
Book chapter, Meier Fet al., Molecularly Imprinted Polymers as Artificial Receptors,
In: Artificial Receptors for Chemical Sensors, Mirsky VM, Yatsimirsky AK (Eds.)
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 391-437, (2010)
imprinting efficiency
Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
imprinting efficiency
Zhang ZL et al., Synthesis of highly efficient D-naproxen imprinted polymer and investigation of their specific performance.
Journal of Applied Polymer Science, 113, (2), 1050-1062, (2009)
imprinting efficiency
Zhao KY et al., Macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres with the surface imprinting of bovine serum albumin in inverse-phase suspension.
Journal of Applied Polymer Science, 109, (4), 2687-2693, (2008)
imprinting efficiency
Zhao KY et al., The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Alginate/Phosphate Hybrid Microspheres Via the Adjustment of pH Values and Salt Concentration.
Macromolecular Symposia, 297, (1), 126-137, (2010)
Imprinting efficiency (IE)
Zhao KY et al., Rebinding and recognition properties of protein-macromolecularly imprinted calcium phosphate/alginate hybrid polymer microspheres.
Reactive and Functional Polymers, 68, (3), 732-741, (2008)
Imprinting factor
Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
Imprinting method
Dhakal RP et al., Planarity-recognition enhancement of N-(2-pyridylmethyl)chitosan by imprinting planar metal ions.
Reactive and Functional Polymers, 68, (11), 1549-1556, (2008)
Imprinting molecule
Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
Imprint ion
Singh DK et al., Synthesis and characterization of Fe(III)-ion imprinted polymer for recovery of Fe(III) from water samples.
Journal of Scientific and Industrial Research, 69, (10), 767-772, (2010)
Indirect inhibitive immunoassay
Tang PP et al., A novel indirect inhibitive immunoassay for sulfamethoxazole.
Chinese Chemical Letters, 21, (8), 955-958, (2010)
Indium-doped tin oxide
Chuang SW et al., Electrochemical characterisation of a conductive polymer molecularly imprinted with an Amadori compound.
Biosensors and Bioelectronics, 24, (10), 3170-3173, (2009)
Indium tin oxide electrode
Xiang HY et al., Electrochemical Sensor for trans-Resveratrol Determination Based on Indium Tin Oxide Electrode Modified with Molecularly Imprinted Self-Assembled Films.
Electroanalysis, 21, (10), 1207-1210, (2009)
3-Indole acetic acid
Hu YL et al., Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.
Analytical and Bioanalytical Chemistry, 399, (10), 3367-3374, (2011)
3-Indoleacetic acid
Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
Indole-3-acetic acid
Zhang Y et al., Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues.
Journal of Chromatography A, 1217, (47), 7337-7344, (2010)
Indole alkaloids
Lopez C et al., Synthesis and study of a molecularly imprinted polymer for the specific extraction of indole alkaloids from Catharanthus roseus extracts.
Analytica Chimica Acta, 683, (2), 198-205, (2011)
3-Indolepropionic acid
Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
3-Indolybutyric acid
Zhang TL et al., Influence of Properties of Indole-3-Carboxylic Acids on Their Molecular Imprinting Efficiency.
Chinese Journal of Analytical Chemistry, 38, (4), 593-597, (2010)
Indomethacin (IDM)
Yang T et al., Development of a selective molecularly imprinted polymer-based solid-phase extraction for indomethacin from water samples.
Analytical and Bioanalytical Chemistry, 391, (8), 2905-2914, (2008)
Inductively coupled plasma-atomic emission spectrometry
Shamsipur M et al., Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions.
Talanta, 83, (2), 674-681, (2010)
Inductively coupled plasma-atomic emission spectrometry
Shamsipur M et al., Synthesis of a novel nanostructured ion-imprinted polymer for very fast and highly selective recognition of copper(II) ions in aqueous media.
Reactive and Functional Polymers, 71, (2), 131-139, (2011)
Inductively coupled plasma atomic emission spectrometry
Wang LL et al., Synthesis, characterization and adsorption behavior of Pb2+ - Imprinted polymer in aqueous solution.
Chinese Journal of Analytical Chemistry, 37, (4), 537-542, (2009)
Inductively coupled plasma atomic emission spectrometry
Wang LL et al., Study on adsorption behavior and mechanism of copper(II) ion imprinted polymer.
Metallurgical Analysis, 30, (2), 17-22, (2010)
Inductively coupled plasma atomic emission spectrometry
Zhang ZL et al., Analysis of Properties of Cadmium Adsorption onto Whisker Surface Ion-Imprinted Polymer by Inductively Coupled Plasma Atomic Emission Spectrometry.
Spectroscopy and Spectral Analysis, 30, (3), 792-796, (2010)
Inductively coupled plasma-mass spectrometry
Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
Inductively coupled plasma-optical emission spectrometry
García-Otero N et al., On-line ionic imprinted polymer selective solid-phase extraction of nickel and lead from seawater and their determination by inductively coupled plasma-optical emission spectrometry.
Analytical and Bioanalytical Chemistry, 395, (4), 1107-1115, (2009)
Inductively coupled plasma-optical emission spectrometry
Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
Infrared spectroscopy
Hasegawa T et al., Infrared spectroscopic study of molecular interaction of tacticity-controlled poly(N-isopropylacrylamide) in a cast film deposited on a solid substrate.
Analytical and Bioanalytical Chemistry, 398, (5), 2203-2209, (2010)
Infrared spectroscopy
Lattanzio VMT et al., Current analytical methods for trichothecene mycotoxins in cereals.
TrAC Trends in Analytical Chemistry, 28, (6), 758-768, (2009)
Infrared spectroscopy
Rocha FRP et al., Direct Solid-Phase Optical Measurements in Flow Systems: A Review.
Analytical Letters, 44, (1), 528-559, (2011)
iniferter
Barahona F et al., Chromatographic performance of molecularly imprinted polymers: Core-shell microspheres by precipitation polymerization and grafted MIP films via iniferter-modified silica beads.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (5), 1058-1066, (2010)
iniferter
Chen RR et al., Novel surface-modified molecularly imprinted membrane prepared with iniferter for permselective separation of lysozyme.
Journal of Membrane Science, 363, (1-2), 212-220, (2010)
iniferter
Gai QQ et al., Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method.
Frontiers of Chemistry in China, 3, (4), 370-377, (2008)
iniferter
Lee HY et al., Grafting of molecularly imprinted polymers on iniferter-modified carbon nanotube.
Biosensors and Bioelectronics, 25, (3), 587-591, (2009)
iniferter
Qin L et al., Surface-modified polystyrene beads as photografting imprinted polymer matrix for chromatographic separation of proteins.
Journal of Chromatography A, 1216, (5), 807-814, (2009)
iniferter
Su SF et al., HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique.
Talanta, 76, (5), 1141-1146, (2008)
iniferter
Vaughan AD et al., Enhancing therapeutic loading and delaying transport via molecular imprinting and living/controlled polymerization.
AIChE Journal, 56, (1), 268-279, (2010)
iniferter-induced living radical precipitation polymerization
Li JY et al., One-pot synthesis of surface-functionalized molecularly imprinted polymer microspheres by iniferter-induced "living" radical precipitation polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 48, (15), 3217-3228, (2010)
Iniferter technique
Xu WJ et al., Determination of sulfonamides in bovine milk with column-switching high performance liquid chromatography using surface imprinted silica with hydrophilic external layer as restricted access and selective extraction material.
Journal of Chromatography A, 1217, (46), 7198-7207, (2010)
Initiator
Liu Z et al., Preparation and affinity assessment of parathion molecularly imprinted polymers.
Polymeric Materials Science and Engineering, 27, (3), 83-86+91, (2011)
In-line concentrator
Lara FJ et al., Evaluation of a molecularly imprinted polymer as in-line concentrator in capillary electrophoresis.
Electrophoresis, 29, (18), 3834-3841, (2008)
In-line SPE
Ramautar R et al., Recent developments in coupled SPE-CE.
Electrophoresis, 31, (1), 44-54, (2010)
Inorganic
Aguilar-Arteaga K et al., Magnetic solids in analytical chemistry: A review.
Analytica Chimica Acta, 674, (2), 157-165, (2010)
Inorganic analysis
Matsuoka S et al., Recent trends in solid phase spectrometry: 2003-2009. A Review.
Analytica Chimica Acta, 664, (1), 1-18, (2010)
Inorganic mercury
Dakova I et al., Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury.
Talanta, 78, (2), 523-529, (2009)
inosine
Kusunoki T et al., Molecular imprinting micropolymerbeads having cooperative effect of both surfactant and inosine template.
Journal of Applied Polymer Science, 117, (1), 565-571, (2010)
in-situ
Wu YQ et al., Investigation on the in-situ synthesis of molecular imprint polymer for on-line monintoring chloromycetin by piezoelectricity sensor.
Piezoelectrics and Acoustooptics, 31, (4), 589-593, (2009)
in-situ
Zhang J et al., Preparation of molecular imprinted monolithic extraction column and its application to strychnine analysis in Wan Tong Jin Gu troche by HPLC.
Journal Of Liquid Chromatography & Related Technologies, 33, (6), 770-777, (2010)
in situ characterization
Book chapter, Tada Met al., Advanced Design of Catalyst Surfaces with Metal Complexes for Selective Catalysis,
In: Modern Surface Organometallic Chemistry, Basset JM, Psaro R, Roberto D, Ugo R (Eds.)
Wiley: Weinheim, 375-415, (2009)
In situ imprinting
Prathish KP et al., Rational Design of In Situ Monolithic Imprinted Polymer Membranes for the Potentiometric Sensing of Diethyl Chlorophosphate - a Chemical Warfare Agent Simulant.
Electroanalysis, 21, (9), 1048-1056, (2009)
In situ metal oxide modification
Saumya V et al., In situ copper oxide modified molecularly imprinted polypyrrole film based voltammetric sensor for selective recognition of tyrosine.
Talanta, 85, (2), 1056-1062, (2011)
In situ polymerization
Chen CB et al., Trace bensulfuron-methyl analysis in tap water, soil, and soybean samples by a combination of molecularly imprinted stir bar sorption extraction and HPLC-UV.
Journal of Applied Polymer Science, 122, (2), 1198-1205, (2011)
in-situ polymerization
Li ZY et al., Monolithic column of molecularly imprinted polymers for liquid chromatography.
Progress In Chemistry, 20, (5), 747-753, (2008)
In situ polymerization
Sun XL et al., Determination of tetracyclines in food samples by molecularly imprinted monolithic column coupling with high performance liquid chromatography.
Talanta, 79, (3), 926-934, (2009)
In situ polymerization
Yang LQ et al., Selective enrichment and determination of nicosulfuron in water and soil by a stir bar based on molecularly imprinted polymer coatings.
Analytica Chimica Acta, 670, (1-2), 72-77, (2010)
in situ product recovery
Book chapter, Hatti-Kaul R, Downstream Processing in Industrial Biotechnology,
In: Industrial Biotechnology, Soetaert W, Vandamme EJ (Eds.)
Wiley-VCH: Weinheim, 279-321, (2010)
In situ sensing
Lieberzeit PA et al., Chemosensors in environmental monitoring: challenges in ruggedness and selectivity.
Analytical and Bioanalytical Chemistry, 393, (2), 467-472, (2009)
in-situ synthesis
Li H et al., Application of Molecularly Imprinted Column for Separation and Purification of Bioactive Compound from Cirsium segetum Bunge.
Separation Science And Technology, 44, (2), 370-385, (2009)
In situ technique
Amut E et al., In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study.
Journal of Polymer Research, 17, (3), 401-409, (2010)
Instrumental analysis
Book chapter, Gros Met al., Analysis of Emerging Contaminants of Municipal and Industrial Origin,
In: Emerging Contaminants from Industrial and Municipal Waste, Barceló D, Petrovic M (Eds.)
Springer: 37-104, (2008)
Insulin
Proceeding, Dickert FL et al, Sensors for Healthcare Monitoring - Proteins, Viruses and Blood-Group-Typing,
Dössel O, Schlegel WC (Eds.),
325-328, (2009)
Insulin-imprinted polymer
Prasad BB et al., Imprinting molecular recognition sites on multiwalled carbon nanotubes surface for electrochemical detection of insulin in real samples.
Electrochimica Acta, 55, (28), 9146-9156, (2010)
integration
Alizadeh T, Comparison of different methodologies for integration of molecularly imprinted polymer and electrochemical transducer in order to develop a paraoxon voltammetric sensor.
Thin Solid Films, 518, (21), 6099-6106, (2010)
Intelligent drug delivery
Puoci F et al., Stimuli-responsive molecularly imprinted polymers for drug delivery: A review.
Current Drug Delivery, 5, (2), 85-96, (2008)
intelligent polymers
Xiao CS et al., Recent developments in intelligent biomedical polymers.
Science in China Series B: Chemistry, 52, (2), 117-130, (2009)
Intelligent therapeutics
Caldorera-Moore M et al., Micro- and nanotechnologies for intelligent and responsive biomaterial-based medical systems.
Advanced Drug Delivery Reviews, 61, (15), 1391-1401, (2009)
Interaction energy
Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)
Interaction energy
Riahi S et al., Computational Approach to Investigation of Template/Monomer Complex in Imprinted Polymers; Dinitrobenzene Sensor.
International Journal of Electrochemical Science, 5, (4), 509-516, (2010)
Interactions non covalentes
Hillberg AL et al., Biomolecule imprinting: Developments in mimicking dynamic natural recognition systems.
ITBM-RBM, 29, (2-3), 89-104, (2008)
Interdigital capacitance transducer
Sontimuang C et al., Interdigitated capacitive biosensor based on molecularly imprinted polymer for rapid detection of Hev b1 latex allergen.
Analytical Biochemistry, 410, (2), 224-233, (2011)
interface
Ariga K et al., Intelligent Chiral Sensing Based on Supramolecular and Interfacial Concepts.
Sensors, 10, (7), 6796-6820, (2010)
interfacial activation
Yang JK et al., Combination of bioimprinting and silane precursor alkyls improved the activity of sol-gel-encapsulated lipase.
Enzyme and Microbial Technology, 46, (3-4), 257-261, (2010)
Interferometry
Edmiston PL et al., Detection of vapor phase trinitrotoluene in the parts-per-trillion range using waveguide interferometry.
Sensors and Actuators B: Chemical, 143, (2), 574-582, (2010)
intermolecular interactions
Saloni J et al., Molecularly imprinted polymers for detection of explosives: computational study on molecular interactions of 2,6-dinitrotoluene and methacrylic acid complex.
Structural Chemistry, 21, (6), 1171-1184, (2010)
Interpenetrating networks
Tov OY et al., Molecularly imprinted hydrogel displaying reduced non-specific binding and improved protein recognition.
Journal of Separation Science, 33, (11), 1673-1681, (2010)
interpenetrating polymer network (IPN)
Wang B et al., MMTCA Recognition by Molecular Imprinting in Interpenetrating Polymer Network Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol).
Macromolecular Bioscience, 8, (5), 417-425, (2008)
in-tube solid-phase microextraction
Cruz-Vera M et al., Sorptive microextraction for liquid-chromatographic determination of drugs in urine.
TrAC Trends in Analytical Chemistry, 28, (10), 1164-1173, (2009)
in-tube solid-phase microextraction
Kataoka H et al., Recent advances in SPME techniques in biomedical analysis.
Journal of Pharmaceutical and Biomedical Analysis, 54, (5), 926-950, (2011)
in-tube solid-phase microextraction
Zhang SW et al., Molecularly imprinted monolith in-tube solid-phase microextraction coupled with HPLC/UV detection for determination of 8-hydroxy-2’-deoxyguanosine in urine.
Analytical and Bioanalytical Chemistry, 395, (2), 479-487, (2009)
In-tube solid phase microextraction
Zhang SW et al., Determination of urinary 8-hydroxy-2’-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction.
Chinese Chemical Letters, 21, (1), 85-88, (2010)
Inverse microemulsion polymerization
Yao J et al., Preparation of metal ion imprinting adsorbent resin by inverse microemulsion polymerization and its performance.
Petrochemical Technology, 37, (4), 397-401, (2008)
Inverse-phase suspension polymerization
Pan J et al., Recognition property and preparation of Staphylococcus aureus protein A-imprinted polyacrylamide polymers by inverse-phase suspension and bulk polymerization.
Polymer, 50, (11), 2365-2372, (2009)
Inverse suspension
Kotrotsiou O et al., On the synthesis of peptide imprinted polymers by a combined suspension--Epitope polymerization method.
Materials Science and Engineering: B, 165, (3), 256-260, (2009)
inverse suspension polymerization
Chang HC et al., Studies of theophylline imprinted phenolic resin sorbent.
Acta Polymerica Sinica, (4), 340-346, (2011)
Iodixanol
Liu Z et al., Absorption performance of iodixanol-imprinted polymers in aqueous and blood plasma media.
Acta Biomaterialia, 6, (6), 2003-2012, (2010)
Ion channel sensors
Book chapter, Danielsson B, Artificial Receptors,
In: Biosensing for the 21st Century, Renneberg R, Lisdat F (Eds.)
Springer: Berlin, 97-122, (2008)
ion exchange
Samatya S et al., The effect of polystyrene as a porogen on the fluoride ion adsorption of Zr(IV) surface-immobilized resin.
Reactive and Functional Polymers, 70, (1), 63-68, (2010)
ionic imprinted polymer
García-Otero N et al., On-line ionic imprinted polymer selective solid-phase extraction of nickel and lead from seawater and their determination by inductively coupled plasma-optical emission spectrometry.
Analytical and Bioanalytical Chemistry, 395, (4), 1107-1115, (2009)
ionic imprinted polymer
Otero-Romaní J et al., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction.
Talanta, 79, (3), 723-729, (2009)
ionic imprinted polymer
Otero-Romaní J et al., Ionic imprinted polymer for nickel recognition by using the bi-functionalized 5-vinyl-8-hydroxyquinoline as a monomer: Application as a new solid phase extraction support.
Microchemical Journal, 93, (2), 225-231, (2009)
ionic imprinting
Buhani et al., Production of metal ion imprinted polymer from mercapto-silica through sol-gel process as selective adsorbent of cadmium.
Desalination, 251, (1-3), 83-89, (2010)
ionic imprinting
Gao XC et al., Studies on Recognition and Separation of Neighbor Rare Earth Ions on Scale of Picometer Using Novel Surface Ion-Imprinted Material.
Acta Chimica Sinica, 68, (11), 1109-1118, (2010)
ionic imprinting
Wang ZQ et al., Ion-imprinted thiol-functionalized silica gel sorbent for selective separation of mercury ions.
Microchimica Acta, 165, (1), 151-157, (2009)
Ionic liquid
Bi W et al., Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste.
Journal of Chromatography B, 878, (24), 2243-2248, (2010)
Ionic liquid
He CY et al., Molecularly imprinted silica prepared with immiscible ionic liquid as solvent and porogen for selective recognition of testosterone.
Talanta, 74, (5), 1126-1131, (2008)
Ionic liquid
He JX et al., Preparation and characterization of molecularly imprinted silica monolith for screening sulfamethazine.
Journal of Separation Science, 33, (20), 3263-3271, (2010)
Ionic liquid
Zhang MS et al., Preparation of Hydroquinone Molecularly Imprinted Polymer Microspheres by Suspension Polymerization in Two-phase System of Ionic Liquid-based Aqueous.
Chinese Journal of Applied Chemistry, 27, (5), 518-522, (2010)
Ionic liquid-modified porous polymer
Tian M et al., Molecular imprinting in ionic liquid-modified porous polymer for recognitive separation of three tanshinones from Salvia miltiorrhiza Bunge.
Analytical and Bioanalytical Chemistry, 399, (7), 2495-2502, (2011)
ionic liquid(s)
Zhang JJ et al., Separation Processes in the Presence of Cyclodextrins Using Molecular Imprinting Technology and Ionic Liquid Cooperating Approach.
Current Organic Chemistry, 15, (1), 74-85, (2011)
Ion-imprint
Jiang Y et al., Effect of solvent/monomer feed ratio on the structure and adsorption properties of Cu2+-imprinted microporous polymer particles.
Chemical Engineering Journal, 166, (1), 435-444, (2011)
ion-imprinted
Bayramoglu G et al., Synthesis of Cr(VI)-imprinted poly(4-vinyl pyridine-co-hydroxyethyl methacrylate) particles: Its adsorption propensity to Cr(VI).
Journal of Hazardous Materials, 187, (1-3), 213-221, (2011)
ion-imprinted
Li CX et al., Synthesis, characterization, and adsorption performance of Pb(II)-imprinted polymer in nano-TiO2 matrix.
Journal of Environmental Sciences, 21, (12), 1722-1729, (2009)
ion-imprinted
Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)
ion-imprinted
Liu BJ et al., As(III) removal from aqueous solution using α-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)
ion-imprinted
Liu Y et al., Synthesis and Adsorption Performance of Surface-Grafted Co(II)-Imprinted Polymer for Selective Removal of Cobalt.
Chinese Journal of Chemistry, 28, (4), 548-554, (2010)
Ion-imprinted chitosan
Liu HJ et al., Improvement of metal adsorption onto chitosan/Sargassum sp. composite sorbent by an innovative ion-imprint technology.
Water Research, 45, (1), 145-154, (2011)
Ion-imprinted hydrogel
Liu YH et al., Selective adsorption of uranyl ion on ion-imprinted chitosan/PVA cross-linked hydrogel.
Hydrometallurgy, 104, (2), 150-155, (2010)
Ion-imprinted membranes
Zhai YH et al., Metal ion-small molecule complex imprinted polymer membranes: Preparation and separation characteristics.
Reactive and Functional Polymers, 68, (1), 284-291, (2008)
Ion-imprinted particles
Esen C et al., Highly selective ion-imprinted particles for solid-phase extraction of Pb2+ ions.
Materials Science and Engineering: C, 29, (8), 2464-2470, (2009)
Ion imprinted polyamine
An FQ et al., Adsorption characteristics of Cr(III) ionic imprinting polyamine on silica gel surface.
Desalination, 249, (3), 1390-1396, (2009)
ion imprinted polymer
Abliz S et al., Preparation of Pb2+ Imprinted Acrylic Acid-co-Styrene and Analysis of Its Adsorption Properties by FAAS.
Spectroscopy and Spectral Analysis, 31, (6), 1702-1706, (2011)
Ion-imprinted polymer
Ahmadi SJ et al., Synthesis and characterization of new ion-imprinted polymer for separation and preconcentration of uranyl (UO22+) ions.
Journal of Hazardous Materials, 175, (1-3), 193-197, (2010)
Ion-imprinted polymer
Arbab-Zavar MH et al., Synthesis and characterization of nano-pore thallium (III) ion-imprinted polymer as a new sorbent for separation and preconcentration of thallium.
Journal of Hazardous Materials, 185, (1), 38-43, (2011)
Ion-imprinted polymer
Cheng ZQ et al., Synthesis and characterization of an ion-imprinted polymer for selective solid phase extraction of thorium(IV).
Microchimica Acta, 173, (3), 423-431, (2011)
Ion-imprinted polymer
Dakova I et al., Ion-imprinted polymethacrylic microbeads as new sorbent for preconcentration and speciation of mercury.
Talanta, 78, (2), 523-529, (2009)
Ion-imprinted polymer
Fasihi J et al., Adsorption of uranyl ion onto an anthraquinone based ion-imprinted copolymer.
Reactive and Functional Polymers, 71, (8), 803-808, (2011)
ion imprinted polymer
Godlewska-Zylkiewicz B et al., Assessment of ion imprinted polymers based on Pd(II) chelate complexes for preconcentration and FAAS determination of palladium.
Talanta, 83, (2), 596-604, (2010)
ion imprinted polymer
Guo JJ et al., Ion imprinted polymer particles of neodymium: synthesis, characterization and selective recognition.
Journal of Rare Earths, 27, (1), 22-27, (2009)
ion imprinted polymer
James D et al., Design of two-dimensional biomimetic uranyl optrode and its application to the analysis of natural waters.
Talanta, 74, (5), 1420-1427, (2008)
ion imprinted polymer
Li HZ et al., Flow-Injection Chemiluminescence Determination of Trace Copper On-Line Separation and Enrichment by Ion Imprinted Polymer.
Spectroscopy and Spectral Analysis, 31, (6), 1472-1475, (2011)
ion imprinted polymer
Li ZC et al., Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol-gel process for selective removal of cadmium(II) from aqueous solution.
Chemical Engineering Journal, 171, (2), 703-710, (2011)
ion imprinted polymer
Proceeding, Li ZC et al, Application of Imprinted Functionalized Silica Gel Sorbent for Selective Removal of Cadmium (II) from Industial Wastewaters,
In: Advanced Materials Research, Yushu Z (Ed.),
441-444, (2011)
ion imprinted polymer
Ng SM et al., Demonstration of a simple, economical and practical technique utilising an imprinted polymer for metal ion sensing.
Microchimica Acta, 169, (3), 303-311, (2010)
ion imprinted polymer
Otero-Romaní J et al., Synthesis, characterization and evaluation of ionic-imprinted polymers for solid-phase extraction of nickel from seawater.
Analytica Chimica Acta, 630, (1), 1-9, (2008)
ion imprinted polymer
Özkütük EB et al., Thiocyanate separation by imprinted polymeric systems.
Microchimica Acta, 169, (1), 129-135, (2010)
Ion-imprinted polymer
Saraji M et al., Selective solid-phase extraction of Ni(II) by an ion-imprinted polymer from water samples.
Journal of Hazardous Materials, 167, (1-3), 1152-1157, (2009)
ion imprinted polymer
Segatelli MG et al., Cadmium ion-selective sorbent preconcentration method using ion imprinted poly(ethylene glycol dimethacrylate-co-vinylimidazole).
Reactive and Functional Polymers, 70, (6), 325-333, (2010)
Ion-imprinted polymer
Shirvani-Arani S et al., Synthesis of nano-pore samarium (III)-imprinted polymer for preconcentrative separation of samarium ions from other lanthanide ions via solid phase extraction.
Analytica Chimica Acta, 623, (1), 82-88, (2008)
ion imprinted polymer
Singh DK et al., Synthesis, characterization and removal of Cd(II) using Cd(II)-ion imprinted polymer.
Journal of Hazardous Materials, 164, (2-3), 1547-1551, (2009)
ion imprinted polymer
Singh DK et al., Synthesis of a New Cu(II)-Ion Imprinted Polymer for Solid Phase Extraction and Preconcentration of Cu(II).
Chromatographia, 70, (11), 1539-1545, (2009)
Ion-imprinted polymer
Singh DK et al., Synthesis and characterization of UO22+-ion imprinted polymer for selective extraction of UO22+.
Analytica Chimica Acta, 644, (1-2), 42-47, (2009)
Ion-imprinted polymer
Singh DK et al., Synthesis and characterization of Hg(II)-ion-imprinted polymer: Kinetic and isotherm studies.
Desalination, 257, (1-3), 177-183, (2010)
ion imprinted polymer
Singh DK et al., Synthesis, characterization and analytical applications of Ni(II)-ion imprinted polymer.
Applied Surface Science, 256, (24), 7632-7637, (2010)
ion imprinted polymer
Singh DK et al., Synthesis and characterization of Fe(III)-ion imprinted polymer for recovery of Fe(III) from water samples.
Journal of Scientific and Industrial Research, 69, (10), 767-772, (2010)
ion imprinted polymer
Su XF et al., Study on the preparation of lead ion imprinted polymer and its specific adsorption performance.
Metallurgical Analysis, 29, (8), 16-20, (2009)
ion imprinted polymer
Tobiasz A et al., Cu(II)-imprinted styrene-divinylbenzene beads as a new sorbent for flow injection-flame atomic absorption determination of copper.
Microchemical Journal, 93, (1), 87-92, (2009)
ion imprinted polymer
Proceeding, Yu ZX et al, Ion-imprinted polymers supported by SiO2 with a chitosan incorporated sol-gel process for selective separation of Pb(II) and Cu(II) system,
2921-2924, (2011)
Ion-imprinted polymer
Zhai YH et al., Selective enrichment of trace copper(II) from biological and natural water samples by SPE using ion-imprinted polymer.
Journal of Separation Science, 31, (6-7), 1195-1200, (2008)
Ion-imprinted polymer
Zhang ZH et al., Microwave-assisted Heating Preparation of Core-shell Ion-imprinted Polymer and Extraction of Cr(III) from Urine.
Chemical Journal of Chinese Universities-Chinese, 31, (9), 1734-1740, (2010)
Ion-imprinted polymeric nanoparticles
Shamsipur M et al., Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions.
Talanta, 83, (2), 674-681, (2010)
Ion-imprinted polymeric nanoparticles
Shamsipur M et al., Synthesis of a novel nanostructured ion-imprinted polymer for very fast and highly selective recognition of copper(II) ions in aqueous media.
Reactive and Functional Polymers, 71, (2), 131-139, (2011)
Ion-imprinted polymers
Huang H et al., Selective solid-phase extraction of Ni(II) by an ion-imprinted polymer from biological samples.
Asian Journal of Chemistry, 23, (4), 1527-1530, (2011)
Ion-imprinted polymers
Liang RN et al., Potentiometric Sensor Based on an Ion-Imprinted Polymer for Determination of Copper.
Sensor Letters, 9, (2), 557-562, (2011)
Ion-imprinted polymers
Lin CR et al., Selective solid-phase extraction of trace thorium(IV) using surface-grafted Th(IV)-imprinted polymers with pyrazole derivative.
Talanta, 81, (1-2), 30-36, (2010)
Ion imprinted polymers
Yang XA et al., Preparation and Evaluation Properties of Pb2+ on-Imprinted Polymers on Chitosan Modified Multi-walled Carbon Nanotube.
Chinese Journal of Analytical Chemistry, 39, (1), 34-38, (2011)
Ion imprinted polymers (IIPs)
Zheng H et al., Selective Solid-phase Extraction of Hg(II) Using Silica Gel Surface - Imprinting Technique.
Chemia Analityczna, 53, (5), 673-687, (2008)
Ion-imprinted silica gel sorbent
Guo JJ et al., On-line Selective Solid-Phase Extraction of Copper with a Surface Ion Imprinted Silica Gel Sorbent.
Journal of the Chinese Chemical Society, 56, (4), 763-770, (2009)
Ion-imprinted silica gel sorbent
Guo JJ et al., Erbium(III)-ion imprinted silica gel sorbent: synthesis and selective solid-phase extraction.
Journal of Functional Materials, 41, (Suppl. 2), 288-291, (2010)
Ion-imprinted silica gel sorbent
Zhang N et al., Chromium(III)-imprinted silica gel for speciation analysis of chromium in environmental water samples with ICP-MS detection.
Talanta, 75, (2), 536-543, (2008)
ion imprinted silica sorbent
Saraji M et al., Preparation and evaluation of an ion imprinted sol-gel material for selective solid-phase extraction of Ni(II).
International Journal of Environmental Analytical Chemistry, 89, (5), 305-317, (2009)
Ion-imprintined polymer (IIP)
Özkütük EB et al., Selective solid-phase extraction of Cd(II) using double imprinting strategy.
Gazi University Journal of Science, 23, (1), 19-26, (2010)
ion imprinting
Candan N et al., Cadmium removal out of human plasma using ion-imprinted beads in a magnetic column.
Materials Science and Engineering: C, 29, (1), 144-152, (2009)
ion imprinting
Demircelik AH et al., Molecular Recognition-Based Detoxification of Aluminum in Human Plasma.
Journal of Biomaterials Science-Polymer Edition, 20, (9), 1235-1258, (2009)
ion imprinting
Hou LX et al., Preparation and characteristics of a novel Cu(II)-imprinted epoxy resin-based monolithic polymer.
Spectroscopy and Spectral Analysis, 28, (10), 2446-2449, (2008)
ion imprinting
Xiao JS et al., Synthesis of Uranyl Ion Imprinted Polymer and Its Application In Analysis.
Atomic Energy Science and Technology, 45, (3), 267-271, (2011)
ion imprinting
Yusof NA et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for Pb(II) Ion Uptake.
Pertanika Journal of Science and Technology, 17, (1), 155-161, (2009)
ion imprinting
Yusof NA et al., Synthesis and Characterization of a Molecularly Imprinted Polymer for Pb2+ Uptake Using 2-vinylpyridine as the Complexing Monomer.
Sains Malaysiana, 39, (5), 829-835, (2010)
Ion-imprinting membrane
Shawky HA, Synthesis of ion-imprinting chitosan/PVA crosslinked membrane for selective removal of Ag(I).
Journal of Applied Polymer Science, 114, (5), 2608-2615, (2009)
Ion imprinting polymer
Fan H et al., Ion imprinted polymer and its application in the analytical chemistry.
Chemistry Bulletin, 72, (1), 10-14, (2009)
ion mobility spectrometry
Jafari MT et al., A new method based on electrospray ionisation ion mobility spectrometry (ESI-IMS) for simultaneous determination of caffeine and theophylline.
Food Chemistry, 126, (4), 1964-1970, (2011)
ion mobility spectrometry
Mirmahdieh S et al., Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry.
Journal of Separation Science, 34, (1), 107-112, (2011)
ion mobility spectrometry
Rezaei B et al., Selective separation and determination of primidone in pharmaceutical and human serum samples using molecular imprinted polymer-electrospray ionization ion mobility spectrometry (MIP-ESI-IMS).
Talanta, 79, (3), 669-675, (2009)
ion mobility spectrometry
Rezaei B et al., Selective pretreatment and determination of phenazopyridine using an imprinted polymer-electrospray ionization ion mobility spectrometry system.
Talanta, 83, (3), 765-769, (2011)
Ionophores
Trojanowicz M et al., Electrochemical Chiral Sensors and Biosensors.
Electroanalysis, 21, (3-5), 229-238, (2009)
Ion-pair
Alizadeh T, Development of a molecularly imprinted polymer for pyridoxine using an ion-pair as template.
Analytica Chimica Acta, 623, (1), 101-108, (2008)
Ion-pair HPLC
Zamora O et al., Determination of benzimidazole fungicides in water samples by on-line MISPE–HPLC.
Analytical and Bioanalytical Chemistry, 393, (6), 1745-1753, (2009)
ion recognition
Gao XC et al., Studies on Recognition and Separation of Neighbor Rare Earth Ions on Scale of Picometer Using Novel Surface Ion-Imprinted Material.
Acta Chimica Sinica, 68, (11), 1109-1118, (2010)
ion recognition
Li YB et al., Studies on Preparation and Recognition Characteristic of Surface-Ion Imprinting Material IIP-PEI/SiO2 of Chromate Anion.
Separation Science And Technology, 46, (9), 1472-1481, (2011)
Ion selective electrode
Gai P et al., Development of a highly-sensitive malachite green selective electrode.
Chinese Journal of Sensors and Actuators, 23, (8), 1062-1065, (2010)
Ion selective electrode
Guo ZY et al., Tetracycline selective electrode based on molecularly imprinted polymer particles.
Chinese Chemical Letters, 21, (10), 1235-1238, (2010)
Ion selective electrode
Kamel AH et al., Novel Potentiometric Sensors of Molecular Imprinted Polymers for Specific Binding of Chlormequat.
Electroanalysis, 20, (2), 194-202, (2008)
Ion-selective electrode
Liang RN et al., Potentiometric sensor based on molecularly imprinted polymer for determination of melamine in milk.
Sensors and Actuators B: Chemical, 141, (2), 544-550, (2009)
Ion-selective electrode
Tehrani MS et al., Molecularly imprinted polymer based PVC-membrane-coated graphite electrode for the determination of metoprolol.
Journal of the Iranian Chemical Society, 7, (3), 759-769, (2010)
Ion-selective electrode
Tehrani MS et al., Molecularly Imprinted Polymer Based PVC-Membrane-Coated Graphite Electrode for the Determination of Metoprolol.
International Journal of Electrochemical Science, 5, (1), 88-104, (2010)
Ion-selective electrode (ISE)
Proceeding, Liu Y et al, The development of chloride ion selective polypyrrole thin film on a layer-by-layer carbon nanotube working electrode,
Wu HF (Ed.),
Art. No. 798315, (2011)
ion-selective electrodes
Liang RN et al., Potentiometric Sensing of Neutral Species Based on a Uniform-Sized Molecularly Imprinted Polymer as a Receptor.
Angewandte Chemie International Edition, 49, (14), 2556-2559, (2010)
ion-selective electrodes
Liang RN et al., Potentiometric Sensor Based on an Ion-Imprinted Polymer for Determination of Copper.
Sensor Letters, 9, (2), 557-562, (2011)
ion-selective electrodes
Moreira FTC et al., Man-tailored biomimetic sensor of molecularly imprinted materials for the potentiometric measurement of oxytetracycline.
Biosensors and Bioelectronics, 26, (2), 566-574, (2010)
Ion selective sensors
Rebelo TSCR et al., Trimethoprim-selective electrodes with molecularly imprinted polymers acting as ionophores and potentiometric transduction on graphite solid-contact.
Microchemical Journal, 98, (1), 21-28, (2011)
Ion-sensitive field-effect transistor
Kugimiya A et al., Biomimetic sensor for cAMP using an ion-sensitive field-effect transistor.
Materials Science and Engineering: C, 29, (3), 959-962, (2009)
Ion transport
Singh KP et al., Preparation of isoproturon and 2,4-dichlorophenoxy acetic acid imprinted membranes: Ion transport study.
Desalination and Water Treatment, 24, (1-3), 176-189, (2010)
Irganox 1076
Dopico-García MS et al., An approach to imprint irganox 1076: Potential application to the specific migration test in olive oil.
Journal of Applied Polymer Science, 119, (5), 2866-2874, (2011)
Iron oxide
Li Y et al., Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions.
Environmental Pollution, 158, (6), 2317-2323, (2010)
iron removal
Asliyüce S et al., Ion-imprinted supermacroporous cryogel, for in vitro removal of iron out of human plasma with beta thalassemia.
Separation And Purification Technology, 73, (2), 243-249, (2010)
iron removal
Özkara S et al., Ion-imprinted PHEMA based monolith for the removal of Fe3+ ions from aqueous solutions.
Journal of Applied Polymer Science, 120, (3), 1829-1836, (2011)
IRRADIATION
El-Arnaouty MB, Radiation Synthesis and Characterization Study of Imprinted Hydrogels for Metal Ion Adsorption.
Polymer-Plastics Technology and Engineering, 49, (10), 963-971, (2010)
IR spectra
Saloni J et al., Molecularly imprinted polymers for detection of explosives: computational study on molecular interactions of 2,6-dinitrotoluene and methacrylic acid complex.
Structural Chemistry, 21, (6), 1171-1184, (2010)
IR spectrum
Liu J et al., Spectroscopy Study of Methyl Parathion Molecularly Imprinted Polymers.
Spectroscopy and Spectral Analysis, 29, (10), 2756-2759, (2009)
ISFET
Proceeding, Lin CF et al, A CMOS-Compatible Biological Transducer for Creatinine Detection: MIP-Gate ISFET,
525-528, (2009)
isomerism
Kantarovich K et al., Detection of template binding to molecularly imprinted polymers by Raman microspectroscopy.
Applied Physics Letters, 94, (19), 820-825, (2009)
Isononanoic acid
Juhl PB et al., Engineering of Candida antarctica lipase B for hydrolysis of bulky carboxylic acid esters.
Journal of Biotechnology, 150, (4), 474-480, (2010)
isoproturon
Singh KP et al., Preparation of isoproturon and 2,4-dichlorophenoxy acetic acid imprinted membranes: Ion transport study.
Desalination and Water Treatment, 24, (1-3), 176-189, (2010)
isoproturon
Zhao J et al., Isoproturon Sensor Based on Molecularly Imprinted Electropolymer.
Chinese Journal of Analytical Chemistry, 37, (8), 1219-1222, (2009)
isotherm
Singh DK et al., Synthesis and characterization of Hg(II)-ion-imprinted polymer: Kinetic and isotherm studies.
Desalination, 257, (1-3), 177-183, (2010)
isothermal titration calorimetry
Gué AM et al., Characterization of recognition sites for diethyl 4-nitrobenzylphosphonate, an organophosphate pesticide analogue.
Analytica Chimica Acta, 614, (1), 63-70, (2008)
isotherms
Kyzas GZ et al., Selective separation of basic and reactive dyes by molecularly imprinted polymers (MIPs).
Chemical Engineering Journal, 149, (1-3), 263-272, (2009)
Isotherm study
Hajizadeh S et al., Evaluation of selective composite cryogel for bromate removal from drinking water.
Journal of Separation Science, 33, (12), 1752-1759, (2010)
Isotope dilution
Vonderheide AP et al., Analysis of permethrin isomers in composite diet samples by molecularly imprinted solid-phase extraction and isotope dilution gas chromatography-ion trap mass spectrometry.
Journal of Chromatography A, 1216, (22), 4633-4640, (2009)
Isoxicam
Rezaei B et al., Solid-phase molecularly imprinted pre-concentration and spectrophotometric determination of isoxicam in pharmaceuticals and human serum.
Talanta, 78, (2), 418-423, (2009)
Itaconic acid
Pascale M et al., Use of itaconic acid-based polymers for solid-phase extraction of deoxynivalenol and application to pasta analysis.
Analytica Chimica Acta, 609, (2), 131-138, (2008)
Itaconic acid
Qu SS et al., Metal ion mediated molecularly imprinted polymer for selective capturing antibiotics containing beta-diketone structure.
Journal of Chromatography A, 1217, (52), 8205-8211, (2010)
top