Imprinted Polymer keyword Index from mipdatabase.com

A: B: C: D: E: F: G: H: I: J: K: L: M: N: O: P: Q: R: S: T: U: V: W: X: Y: Z:
go to papers go to Journals go to authors go to templates and targets switch to patents switch to inventors switch to theses and dissertations back to top

RSS feed
This file created: 09/07/2011

This index is currently under construction, more items will be added soon.

tablets

Javanbakht M et al., A Biomimetic Potentiometric Sensor Using Molecularly Imprinted Polymer for the Cetirizine Assay in Tablets and Biological Fluids.
Electroanalysis, 20, (18), 2023-2030, (2008)

tablets

Javanbakht M et al., Molecularly imprinted polymer based potentiometric sensor for the determination of hydroxyzine in tablets and biological fluids.
Analytica Chimica Acta, 612, (1), 65-74, (2008)

Tamoxifen

Claude B et al., Interest of molecularly imprinted polymers in the fight against doping: Extraction of tamoxifen and its main metabolite from urine followed by high-performance liquid chromatography with UV detection.
Journal of Chromatography A, 1196-1197, (1-2), 81-88, (2008)

Tandem mass spectrometry (MS2)

Lattanzio VMT et al., Current analytical methods for trichothecene mycotoxins in cereals.
TrAC Trends in Analytical Chemistry, 28, (6), 758-768, (2009)

tanshinone

Yan HY et al., Determination of Three Tanshinones from Radix Salvia Miltiorrhiza by Molecularly Imprinted Solid-phase Extraction.
Chinese Journal of Chemistry, 27, (11), 2212-2216, (2009)

Tanshinones

Tian M et al., SPE of Tanshinones from Salvia miltiorrhiza Bunge by using Imprinted Functionalized Ionic Liquid-Modified Silica.
Chromatographia, 73, (1-2), 25-31, (2011)

Tanshinones

Tian M et al., Molecular imprinting in ionic liquid-modified porous polymer for recognitive separation of three tanshinones from Salvia miltiorrhiza Bunge.
Analytical and Bioanalytical Chemistry, 399, (7), 2495-2502, (2011)

Taste assessment

Sun H et al., Piezoelectric quartz crystal sensor for sensing taste-causing compounds in food.
Sensors and Actuators B: Chemical, 131, (1), 148-158, (2008)

TCA

Garde-Cerdán T et al., Molecularly Imprinted Polymer-Assisted Simple Clean-Up of 2,4,6-Trichloroanisole and Ethylphenols from Aged Red Wines.
American Journal of Enology and Viticulture, 59, (4), 396-400, (2008)

TCSPC

Nicholls IA et al., Warfarin: an environment-dependent switchable molecular probe.
Journal of Molecular Recognition, 23, (6), 604-608, (2010)

Tear fluid

Manju S et al., Fluorescent molecularly imprinted polymer film binds glucose with a concomitant changes in fluorescence.
Biosensors and Bioelectronics, 26, (2), 894-897, (2010)

TEM

Fan PM et al., Regulatory effects of Zn(II) on the recognition properties of metal coordination imprinted polymers.
Journal of Applied Polymer Science, 116, (1), 258-266, (2010)

temperature sensitivity

Wang HF et al., Temperature-sensitive molecularly imprinted microgels with esterase activity.
SCIENCE CHINA Chemistry, 54, (3), 515-520, (2011)

Temperature swing adsorption

Tokuyama H et al., Preparation of molecular imprinted thermosensitive gels grafted onto polypropylene by plasma-initiated graft polymerization.
Reactive and Functional Polymers, 68, (1), 182-188, (2008)

template

Huang BY et al., Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography.
Journal of Chromatography A, 1218, (6), 849-855, (2011)

template

Wang YH et al., Preparation and Application of Atrazine Molecularly Imprinted Solid Phase Extraction Pillar.
Chinese Journal of Analytical Chemistry, 38, (5), 678-682, (2010)

template

Zhang QQ et al., Imprinting Effect Inducing Crystallization of Uracil on Polymer Membrane Prepared in Supercritical CO2 Phase Inversion.
Journal of Chemical Engineering of Japan, 42, (1), 21-28, (2009)

Template analogue imprinting

Wang XJ et al., Molecularly imprinted membranes for the recognition of lovastatin acid in aqueous medium by a template analogue imprinting strategy.
Journal of Membrane Science, 313, (1-2), 97-105, (2008)

Templated crosslinked-chitosan

Chen AH et al., Adsorption of Remazol Black 5 from aqueous solution by the templated crosslinked-chitosans.
Journal of Hazardous Materials, 177, (1-3), 668-675, (2010)

template-directed synthesis

Huang YP et al., Molecularly Imprinted Polymers for the Separation of Organic Compounds in Capillary Electrochromatography.
Current Organic Chemistry, 15, (11), 1863-1870, (2011)

templated polymers

Striegler S, Emulsion and Miniemulsion Polymers in Catalysis.
Mini-Reviews in Organic Chemistry, 6, (3), 234-240, (2009)

Templated reaction

Wu XY et al., Development of molecularly imprinted polymers as tailored templates for the solid-state [2+2] photodimerization.
Biosensors and Bioelectronics, 25, (3), 640-646, (2009)

Templated xerogels

Gupta R et al., Molecular imprinting in sol-gel matrix.
Biotechnology Advances, 26, (6), 533-547, (2008)

template effect

Baba Y et al., A Quantitative Consideration for Template Effect of Palladium(II) Using N-[Pyridylmethyl] Chitosan.
Solvent Extraction and Ion Exchange, 29, (3), 509-517, (2011)

Template metal ions

Dhakal RP et al., Planarity-recognition enhancement of N-(2-pyridylmethyl)chitosan by imprinting planar metal ions.
Reactive and Functional Polymers, 68, (11), 1549-1556, (2008)

template molecule

Gao JG et al., Synthesis of a Long Side Chain-Linked and Dually Carboxy Functional Monomer N-(p-Vinylbenzyl)-N,N-bis[2-(3-carboxypropionyloxy)ethyl] amine and Its Application to Recognition of Imprinted Bovine Serum Albumin.
Acta Chimica Sinica, 66, (9), 1067-1073, (2008)

template molecule

Yin XY et al., The Spectroscopy Analysis of Intermolecular Interaction Between the Template Molecule and Functional Monomer Before Polymerization.
Spectroscopy and Spectral Analysis, 30, (8), 2211-2214, (2010)

template molecules

Si BJ et al., New-Generation of Molecular Imprinting Technique.
Progress In Chemistry, 21, (9), 1813-1819, (2009)

template-monomer interaction

Osmani Q et al., The use of FTIR and NMR spectroscopies to study prepolymerisation interactions in nitrogen heterocycles.
Analytical and Bioanalytical Chemistry, 391, (4), 1229-1236, (2008)

template of cloned bacterial protein

Long Y et al., Two-step purification of low-content cellular protein using protein-imprinted polymers.
Analytical Biochemistry, 380, (2), 268-275, (2008)

template of cloned bacterial protein

Long Y et al., Molecular imprinted polymer with positively charged assistant recognition polymer chains for adsorption/enrichment of low content target protein.
Chinese Science Bulletin, 53, (17), 2617-2623, (2008)

template polymerization

Book chapter, Haupt Ket al., Molecularly Imprinted Polymers as Recognition Elements in Sensors,
In: Handbook of Biosensors and Biochips, Marks RS, Cullen DC, Karube I, Lowe CR, Weetall HH (Eds.)
Wiley: (2008)

Template polymer membrane

Liu W et al., Synthesize and application of norfloxacin molecular imprinting polymer membrane.
Ion Exchange and Adsorption, 25, (1), 1-8, (2009)

Template porous silica gel

Kitahara KI et al., Synthesis of monodispersed molecularly imprinted polymer particles for high-performance liquid chromatographic separation of cholesterol using templating polymerization in porous silica gel bound with cholesterol molecules on its surface.
Journal of Chromatography A, 1217, (46), 7249-7254, (2010)

Template removal

Batlokwa BS et al., Optimal Template Removal from Molecularly Imprinted Polymers by Pressurized Hot Water Extraction.
Chromatographia, 73, (5), 589-593, (2011)

Template removal

Lorenzo RA et al., To Remove or Not to Remove? The Challenge of Extracting the Template to Make the Cavities Available in Molecularly Imprinted Polymers (MIPs).
International Journal of Molecular Sciences, 12, (7), 4327-4347, (2011)

Template removal

Verheyen E et al., Challenges for the effective molecular imprinting of proteins.
Biomaterials, 32, (11), 3008-3020, (2011)

templates

del Sole R et al., Molecularly imprinted polymer for solid phase extraction of nicotinamide in pork liver samples.
Journal of Applied Polymer Science, 120, (3), 1634-1641, (2011)

templates

Güney O et al., Molecularly imprinted fluorescent polymers as chemosensors for the detection of mercury ions in aqueous media.
Journal of Applied Polymer Science, 117, (4), 2373-2379, (2010)

templates

Liu JH et al., Solvent-tunable colors in imprinted helical structures on polymer template via multiple UV-induced polymerization.
Journal of Polymer Science Part A: Polymer Chemistry, 49, (5), 1256-1262, (2011)

templates

Philip CM et al., Design of EGDMA-Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity.
Journal of Macromolecular Science, Part A, 45, (4), 335-343, (2008)

Template structural effects

Zaidi SA et al., Open tubular capillary columns with basic templates made by the generalized preparation protocol in capillary electrochromatography chiral separation and template structural effects on chiral separation capability.
Journal of Chromatography A, 1218, (9), 1291-1299, (2011)

Template structural effects

Zaidi SA et al., Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol.
Chromatographia, 73, (5), 517-525, (2011)

templating

Proceeding, Dourado EMA et al, Computer simulation of adsorption in simple models of molecularly imprinted polymers,

256-261, (2009)

templating

Kung HH et al., Synthesis Strategies to Design Structures for Catalytic Applications.
Chinese Journal of Catalysis, 29, (11), 1187-1192, (2008)

templating

Book chapter, Wietor JLet al., Polymers Formed by Dynamic Combinatorial Chemistry,
In: Dynamic Combinatorial Chemistry, Reek JNH, Otto S (Eds.)
Wiley-VCH: Weinheim, Germany, 151-168, (2010)

terbuthylazine

Hu YL et al., Preparation of Terbuthylazine Molecularly Imprinted Monolithic Bar and its Extraction Property.
Chinese Journal of Analytical Chemistry, 37, (3), 466-470, (2009)

terbutylazine

Horváth V et al., Preparation of terbutylazine imprinted polymer microspheres using viscous polymerization solvents.
Journal of Separation Science, 32, (19), 3347-3358, (2009)

Ternary complex

Singh DK et al., Synthesis and characterization of UO22+-ion imprinted polymer for selective extraction of UO22+.
Analytica Chimica Acta, 644, (1-2), 42-47, (2009)

Ternary complex

Xiao JS et al., Synthesis of Uranyl Ion Imprinted Polymer and Its Application In Analysis.
Atomic Energy Science and Technology, 45, (3), 267-271, (2011)

Terpenes

Iqbal N et al., QCM-Arrays for Sensing Terpenes in Fresh and Dried Herbs via Bio-Mimetic MIP Layers.
Sensors, 10, (7), 6361-6376, (2010)

Terpenes

Lieberzeit PA et al., QCM sensor array for monitoring terpene emissions from odoriferous plants.
Monatshefte für Chemie / Chemical Monthly, 140, (8), 947-952, (2009)

testosterone

Gavrilovic I et al., A molecularly imprinted receptor for separation of testosterone and epitestosterone, based on a steroidal cross-linker.
Steroids, 76, (5), 478-483, (2011)

testosterone

He CY et al., Molecularly imprinted silica prepared with immiscible ionic liquid as solvent and porogen for selective recognition of testosterone.
Talanta, 74, (5), 1126-1131, (2008)

testosterone

Mirmahdieh S et al., Analysis of testosterone in human urine using molecularly imprinted solid-phase extraction and corona discharge ion mobility spectrometry.
Journal of Separation Science, 34, (1), 107-112, (2011)

testosterone

Tse Sum Bui B et al., Comment on "Isolation and detection of steroids from human urine by molecularly imprinted solid-phase extraction and liquid chromatography" by Gadzala-Kopciuch et al., J. Chromatogr. B 877 (2009), 1177-1184.
Journal of Chromatography B, 877, (32), 4180-4181, (2009)

Test-systems

Sergeyeva TA et al., Towards development of colorimetric test-systems for phenols detection based on computationally-designed molecularly imprinted polymer membranes.
Materials Science and Engineering: C, 30, (3), 431-436, (2010)

Tetracycline

Divya MP et al., Synthesis and Application of Tetracycline Imprinted Polymer.
Analytical Letters, 43, (6), 919-928, (2010)

Tetracycline

Guo ZY et al., Tetracycline selective electrode based on molecularly imprinted polymer particles.
Chinese Chemical Letters, 21, (10), 1235-1238, (2010)

Tetracycline

Hu XG et al., Preparation and evaluation of solid-phase microextraction fiber based on molecularly imprinted polymers for trace analysis of tetracyclines in complicated samples.
Journal of Chromatography A, 1188, (2), 97-107, (2008)

Tetracycline

Mojica ER et al., Synthesis and evaluation of tetracycline imprinted xerogels: Comparison of experiment and computational modeling.
Analytica Chimica Acta, 684, (1-2), 72-80, (2011)

Tetracycline

Moreira FTC et al., New potentiometric sensors based on two competitive recognition sites for determining tetracycline residues using flow-through system.
Procedia Engineering, 5, 1200-1203, (2010)

Tetracycline antibiotics

Chen LG et al., Preparation of magnetic molecularly imprinted polymer for the separation of tetracycline antibiotics from egg and tissue samples.
Journal of Chromatography A, 1216, (18), 3710-3719, (2009)

Tetracycline antibiotics

Jing T et al., Determination of trace tetracycline antibiotics in foodstuffs by liquid chromatography–tandem mass spectrometry coupled with selective molecular-imprinted solid-phase extraction.
Analytical and Bioanalytical Chemistry, 393, (8), 2009-2018, (2009)

Tetracycline antibiotics

Jing T et al., Preparation of mixed-templates molecularly imprinted polymers and investigation of the recognition ability for tetracycline antibiotics.
Biosensors and Bioelectronics, 25, (10), 2218-2224, (2010)

Tetracycline antibiotics

Jing T et al., Online coupling of molecularly imprinted solid-phase extraction to HPLC for determination of trace tetracycline antibiotic residues in egg samples.
Journal of Separation Science, 34, (12), 1469-1476, (2011)

Tetracycline antibiotics

Wang P et al., Preparation of hydrophilic molecularly imprinted polymers for tetracycline antibiotics recognition.
Chinese Chemical Letters, 22, (5), 611-614, (2011)

Tetracycline hydrochloride

Lu N et al., Synthesis of molecular imprinted polymer modified TiO2 nanotube array electrode and their photoelectrocatalytic activity.
Journal of Solid State Chemistry, 181, (10), 2852-2858, (2008)

Tetracyclines

Qu GR et al., Metal ion mediated synthesis of molecularly imprinted polymers targeting tetracyclines in aqueous samples.
Journal of Chromatography B, 877, (27), 3187-3193, (2009)

Tetracyclines

Qu SS et al., Metal ion mediated molecularly imprinted polymer for selective capturing antibiotics containing beta-diketone structure.
Journal of Chromatography A, 1217, (52), 8205-8211, (2010)

Tetracyclines

Sun XL et al., Determination of tetracyclines in food samples by molecularly imprinted monolithic column coupling with high performance liquid chromatography.
Talanta, 79, (3), 926-934, (2009)

Tetraethoxysilane

Tsai HA et al., Preparation of imprinted poly(tetraethoxysilanol) sol-gel for the specific uptake of creatinine.
Chemical Engineering Journal, 168, (3), 1369-1376, (2011)

tetrapeptide

Itou Y et al., Optical resolution of racemic amino acid derivatives with molecularly imprinted membranes from tetrapetide consisting of glycinyl residues.
Journal of Membrane Science, 325, (1), 371-375, (2008)

TEXs

Sainz-Gonzalo FJ et al., Synthesis and characterization of a molecularly imprinted polymer optosensor for TEXs-screening in drinking water.
Biosensors and Bioelectronics, 26, (7), 3331-3338, (2011)

Textural properties

Urraca JL et al., Effect of the template and functional monomer on the textural properties of molecularly imprinted polymers.
Biosensors and Bioelectronics, 24, (1), 155-161, (2008)

TFC

Nováková L et al., A review of current trends and advances in modern bio-analytical methods: Chromatography and sample preparation.
Analytica Chimica Acta, 656, (1-2), 8-35, (2009)

Thallium (III)

Arbab-Zavar MH et al., Synthesis and characterization of nano-pore thallium (III) ion-imprinted polymer as a new sorbent for separation and preconcentration of thallium.
Journal of Hazardous Materials, 185, (1), 38-43, (2011)

theophylline

Chang HC et al., Studies of theophylline imprinted phenolic resin sorbent.
Acta Polymerica Sinica, (4), 340-346, (2011)

theophylline

Hillberg AL et al., Design and evaluation of thin and flexible theophylline imprinted polymer membrane materials.
Journal of Molecular Recognition, 22, (3), 223-231, (2009)

theophylline

Jafari MT et al., A new method based on electrospray ionisation ion mobility spectrometry (ESI-IMS) for simultaneous determination of caffeine and theophylline.
Food Chemistry, 126, (4), 1964-1970, (2011)

theophylline

Kan XW et al., Molecular imprinting polymer electrosensor based on gold nanoparticles for theophylline recognition and determination.
Microchimica Acta, 171, (3), 423-429, (2010)

theophylline

Khorrami AR et al., Design of a new cartridge for selective solid phase extraction using molecularly imprinted polymers: Selective extraction of theophylline from human serum samples.
Biosensors and Bioelectronics, 25, (3), 647-651, (2009)

theophylline

Li Y et al., Preparation of Molecularly Imprinted Polymer Films Modified Silica gel and its Extraction Application.
Chinese Journal of Applied Chemistry, 27, (1), 102-106, (2010)

theophylline

Luo XB et al., Grafting of molecularly imprinted polymers from the surface of Fe3O4 nanoparticles containing double bond via suspension polymerization in aqueous environment: A selective sorbent for theophylline.
Journal of Applied Polymer Science, 121, (4), 1930-1937, (2011)

theophylline

Pernites R et al., Electropolymerization molecularly imprinted polymer (E-MIP) SPR sensing of drug molecules: Pre-polymerization complexed terthiophene and carbazole electroactive monomers.
Biosensors and Bioelectronics, 26, (5), 2766-2771, (2011)

theophylline

Wang JY et al., Theophylline molecular imprint composite membranes prepared from poly(vinylidene fluoride) (PVDF) substrate.
Chemical Engineering Science, 65, (10), 3322-3330, (2010)

theophylline

Xu JX et al., Controlled Fabrication of Theophylline Imprinted Polymers on Multiwalled Carbon Nanotubes via Atom Transfer Radical Polymerization.
Journal of Nanoscience and Nanotechnology, 11, (2), 1217-1224, (2011)

theophylline

Proceeding, Zheng R et al, Development of a molecularly imprinted polymer based surface plasmon resonance sensor for theophylline monitoring,
Vo-Dinh T, Lakowicz JR (Eds.),
Article No. 79110F, (2011)

theoretical DFT studies

del Sole R et al., Experimental and Computational Studies on Non-Covalent Imprinted Microspheres as Recognition System for Nicotinamide Molecules.
Molecules, 14, (7), 2632-2649, (2009)

therapeutic contact lenses

Ali M et al., Controlled Release of High Molecular Weight Hyaluronic Acid from Molecularly Imprinted Hydrogel Contact Lenses.
Pharmaceutical Research, 26, (3), 714-726, (2009)

therapeutic contact lenses

Yañez F et al., Supercritical fluid-assisted preparation of imprinted contact lenses for drug delivery.
Acta Biomaterialia, 7, (3), 1019-1030, (2011)

Thermal co-polymerization

Book chapter, Yu JYet al., Synthesis and properties of molecularly imprinted composite membranes of roxithromycin,
In: Advanced Polymer Processing, Ma LX, Wang CS, Yang WM (Eds.)
Scientific.Net: 80-85, (2009)

Thermal desorption

Cummins W et al., Thermal desorption characterisation of molecularly imprinted polymers. Part I: a novel study using direct-probe GC-MS analysis.
Analytical and Bioanalytical Chemistry, 391, (4), 1237-1244, (2008)

Thermal desorption

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (4), 1245-1253, (2008)

Thermal desorption GC-MS

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)

Thermally cleavable reaction

Zhai CX et al., Molecularly imprinted layer-coated silica nanoparticles toward highly selective separation of active diosgenin from Dioscorea nipponica Makino.
Journal of Chromatography A, 1216, (12), 2254-2262, (2009)

Thermal methods

Lettau K et al., Sequential conversion by catalytically active MIP and immobilized tyrosinase in a thermistor.
Biosensors and Bioelectronics, 23, (7), 1216-1219, (2008)

Thermal polymerization

Dmitrienko SG et al., The sorption properties of polymers with molecular imprints of 2,4-dichlorophenoxyacetic acid synthesized by various methods (Original Russian Text © S.G. Dmitrienko, S.A. Popov, Yu.A. Chumichkina, Yu.A. Zolotov, 2011, published in Zhurnal Fizicheskoi Khimii, 2011, Vol. 85, No. 3, pp. 542–547.).
Russian Journal of Physical Chemistry A, Focus on Chemistry, 85, (3), 472-477, (2011)

Thermal polymerization

Tian XQ et al., Preparation and chromatographic performance of phenylalanine molecularly imprinted polymers on silica gel in aqueous medium.
Journal of China Pharmaceutical University, 40, (5), 435-439, (2009)

thermal properties

Li SJ et al., Modulated molecular recognition by a temperature-sensitive molecularly-imprinted polymer.
Journal of Polymer Science Part A: Polymer Chemistry, 47, (9), 2352-2360, (2009)

thermal stability

Yamamoto T et al., The Effects of Cyclodextrins on the Conformation of Proteins.
Current Organic Chemistry, 15, (6), 831-838, (2011)

Thermistor

Rajkumar R et al., Thermometric MIP sensor for fructosyl valine.
Biosensors and Bioelectronics, 23, (7), 1195-1199, (2008)

Thermistor

Rajkumar R et al., Analysis of recognition of fructose by imprinted polymers.
Talanta, 76, (5), 1119-1123, (2008)

thermodynamic

Zhang ZL et al., Kinetic and thermodynamic analysis of selective adsorption of Cs(I) by a novel surface whisker-supported ion-imprinted polymer.
Desalination, 263, (1-3), 97-106, (2010)

thermodynamics

Jiang XH et al., Progress in thermodynamics, physical characterization and modeling of molecular imprinting polymers.
Polymeric Materials Science and Engineering, 25, (3), 170-174, (2009)

thermodynamics

Li SJ et al., Molecularly imprinted polymers: Thermodynamic and kinetic considerations on the specific sorption and molecular recognition.
Sensors, 8, (4), 2854-2864, (2008)

thermodynamics

Nicholls IA et al., Theoretical and computational strategies for rational molecularly imprinted polymer design.
Biosensors and Bioelectronics, 25, (3), 543-552, (2009)

thermodynamics

Xia YQ et al., Adsorption dynamics and thermodynamics of Hb on the Hb-imprinted polymer beads.
Reactive and Functional Polymers, 68, (1), 63-69, (2008)

thermodynamics

Zheng X et al., Selective modification of binding sites of molecularly imprinted polymer.
Journal of Chemical Industry and Engineering (China), 59, (11), 2929-2934, (2008)

thermogravimetric analysis (TGA)

Abu-Surrah AS et al., A molecularly imprinted polymer via a salicylaldiminato-based cobalt(III) complex: A highly selective solid-phase extractant for anionic reactive dyes.
Journal of Applied Polymer Science, 117, (4), 2316-2323, (2010)

Thermo-responsive

Pan GQ et al., An efficient approach to obtaining water-compatible and stimuli-responsive molecularly imprinted polymers by the facile surface-grafting of functional polymer brushes via RAFT polymerization.
Biosensors and Bioelectronics, 26, (3), 976-982, (2010)

thermosensitive

Qin L et al., Molecularly imprinted beads with double thermosensitive gates for selective recognition of proteins.
Analytical and Bioanalytical Chemistry, 399, (10), 3375-3385, (2011)

thermosensitivity

Qin L et al., A Thermosensitive Monolithic Column as an Artificial Antibody for the On-line Selective Separation of the Protein.
Chemistry - A European Journal, 17, (5), 1696-1704, (2011)

The surface molecular imprinting adsorbent (SMIA)

Su HJ et al., Adsorption mechanism for imprinted ion (Ni2+) of the surface molecular imprinting adsorbent (SMIA).
Biochemical Engineering Journal, 39, (3), 503-509, (2008)

Thiabendazole

Barahona F et al., Synthesis of core-shell molecularly imprinted polymer microspheres by precipitation polymerization for the inline molecularly imprinted solid-phase extraction of thiabendazole from citrus fruits and orange juice samples.
Journal of Separation Science, 34, (2), 217-224, (2011)

Thiabendazole

Cacho C et al., Molecularly imprinted capillary electrochromatography for selective determination of thiabendazole in citrus samples.
Journal of Chromatography A, 1179, (2), 216-223, (2008)

4-(2-thiazolylazo) resorcinol

Singh DK et al., Synthesis and characterization of Hg(II)-ion-imprinted polymer: Kinetic and isotherm studies.
Desalination, 257, (1-3), 177-183, (2010)

thin film

Hillberg AL et al., Design and evaluation of thin and flexible theophylline imprinted polymer membrane materials.
Journal of Molecular Recognition, 22, (3), 223-231, (2009)

thin film

Vandevelde F et al., Nanostructured molecularly imprinted polymer films as synthetic recognition layers.
International Journal of Nanotechnology, 5, (6-8), 757-768, (2008)

thin films

Atta NF et al., Smart electrochemical sensor for some neurotransmitters using imprinted sol-gel films.
Talanta, 80, (2), 511-518, (2009)

thin films

BelBruno JJ et al., Amazing pores: Processing, morphology and functional states of molecularly imprinted polymers as sensor materials.
Molecular Crystals And Liquid Crystals, 483, 179-190, (2008)

thin films

Li L et al., Preparation of Core-shell Magnetic Molecularly Imprinted Polymer Nanoparticles for Recognition of Bovine Hemoglobin.
Chemistry - An Asian Journal, 4, (2), 286-293, (2009)

Thiocyanate determination

Özkütük EB et al., Thiocyanate separation by imprinted polymeric systems.
Microchimica Acta, 169, (1), 129-135, (2010)

3-Thiocyanatopropyltriethoxysilane

Li ZC et al., Cd(II)-imprinted polymer sorbents prepared by combination of surface imprinting technique with hydrothermal assisted sol-gel process for selective removal of cadmium(II) from aqueous solution.
Chemical Engineering Journal, 171, (2), 703-710, (2011)

Thiolate sulphur

Cai ZF et al., The imprinted mechanism of metallothionein-imprinted polymers.
Iranian Polymer Journal (English Edition), 17, (4), 289-296, (2008)

Thiol-functionalized

Wang ZQ et al., Ion-imprinted thiol-functionalized silica gel sorbent for selective separation of mercury ions.
Microchimica Acta, 165, (1), 151-157, (2009)

Thiourea

Alizadeh T, Preparation of molecularly imprinted polymer containing selective cavities for urea molecule and its application for urea extraction.
Analytica Chimica Acta, 669, (1-2), 94-101, (2010)

Thiourea group

Kugimiya A et al., Selective Recovery of Phosphate from River Water Using Molecularly Imprinted Polymers.
Analytical Letters, 41, (2), 302-311, (2008)

Thiourea group

Kugimiya A et al., Selectivity and recovery performance of phosphate-selective molecularly imprinted polymer.
Analytica Chimica Acta, 606, (2), 252-256, (2008)

Thiourea group

Kugimiya A et al., Biomimetic sensor for cAMP using an ion-sensitive field-effect transistor.
Materials Science and Engineering: C, 29, (3), 959-962, (2009)

Thiourea receptor

Athikomrattanakul U et al., Preparation and characterization of novel molecularly imprinted polymers based on thiourea receptors for nitrocompounds recognition.
Talanta, 84, (2), 274-279, (2011)

Thorium(IV)

Cheng ZQ et al., Synthesis and characterization of an ion-imprinted polymer for selective solid phase extraction of thorium(IV).
Microchimica Acta, 173, (3), 423-431, (2011)

Thorium(IV)

Lin CR et al., Selective solid-phase extraction of trace thorium(IV) using surface-grafted Th(IV)-imprinted polymers with pyrazole derivative.
Talanta, 81, (1-2), 30-36, (2010)

Thrombin

Evtugyn G et al., Molecularly Imprinted Polymerized Methylene Green as a Platform for Electrochemical Sensing of Aptamer-Thrombin Interactions.
Electroanalysis, 21, (11), 1272-1277, (2009)

Thymidine

Proceeding, Chen ZH et al, Studies on molecular recognition of thymidines with molecularly imprinted polymers,

Art. No. 74931Y, (2009)

Thymidine

Zhang ZH et al., Electrochemical layer-by-layer modified imprinted sensor based on multi-walled carbon nanotubes and sol-gel materials for sensitive determination of thymidine.
Journal of Electroanalytical Chemistry, 644, (1), 7-12, (2010)

thymine

Diltemiz SE et al., Designing of MIP based QCM sensor having thymine recognition sites based on biomimicking DNA approach.
Biosensors and Bioelectronics, 25, (3), 599-603, (2009)

Thymine imprinted sensors

Diltemiz SE et al., Designing of MIP based QCM sensor having thymine recognition sites based on biomimicking DNA approach.
Biosensors and Bioelectronics, 25, (3), 599-603, (2009)

Tilmicosin

Zheng YQ et al., Preparation of Tilmicosin Imprinted Polymers and Its Application to Solid Phase Extraction.
Chinese Journal of Analytical Chemistry, 38, (1), 95-99, (2010)

Tilmicosin

Zheng YQ et al., Molecularly imprinted solid-phase extraction for determination of tilmicosin in feed using high performance liquid chromatography.
Analytica Chimica Acta, 690, (2), 269-274, (2011)

Time correlated single photon counting

Rosengren AM et al., In situ detection of warfarin using time-correlated single-photon counting.
Biochemical and Biophysical Research Communications, 407, (1), 60-62, (2011)

Time-resolved fluorescence spectroscopy

Cywinski PJ et al., Thin-layer molecularly imprinted sensors studied by fluorescence microscopy.
e-Journal of Surface Science and Nanotechnology, 8, 293-297, (2010)

Time resolved fluorescence spectroscopy

Rosengren AM et al., In situ detection of warfarin using time-correlated single-photon counting.
Biochemical and Biophysical Research Communications, 407, (1), 60-62, (2011)

timolol

Alvarez-Lorenzo C et al., Ocular drug delivery from molecularly-imprinted contact lenses.
Journal of Drug Delivery Science and Technology, 20, (4), 237-248, (2010)

TIO2

Huo HY et al., The influence of trace TiO2 on adsorption of Ag+-imprinted adsorbents made from chitosan and mycelium.
Biotechnology and Bioprocess Engineering, 13, (1), 77-83, (2008)

TiO2 gel film

Yang DH et al., Simple method for the fabrication of 1-hydroxypyrene-imprinted TiO2 gel nanofilms.
Current Applied Physics, 9, (2, Supplement 1), e136-e139, (2009)

TiO2 gel films

Mizutani N et al., Remarkable enantioselectivity of molecularly imprinted TiO2 nano-thin films.
Analytica Chimica Acta, 694, (1-2), 142-150, (2011)

TiO2 nanotube

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)

TiO2 nanotube array electrode

Lu N et al., Synthesis of molecular imprinted polymer modified TiO2 nanotube array electrode and their photoelectrocatalytic activity.
Journal of Solid State Chemistry, 181, (10), 2852-2858, (2008)

TiO2-SiO2

Han DM et al., Preparation and characterization of molecularly imprinted SiO2-TiO2 and photo-catalysis for 2, 4-dichlorophenol.
Advanced Materials Letters, 1, (3), 188-192, (2010)

TiO2 ultrathin film

Yang DH et al., Fabrication of glucose-sensitive TiO2 ultrathin films by molecular imprinting and selective detection of monosaccharides.
Sensors and Actuators B: Chemical, 130, (1), 379-385, (2008)

TIS

Sun Z et al., Selective trace analysis of diclofenac in surface and wastewater samples using solid-phase extraction with a new molecularly imprinted polymer.
Analytica Chimica Acta, 620, (1-2), 73-81, (2008)

Hao HX et al., Molecularly imprinted polymers for highly sensitive detection of morphine using surface plasmon resonance spectroscopy.
Chinese Chemical Letters, 22, (4), 477-480, (2011)

trace analysis

Hennion MC et al., Analytical chemistry and society.
Actualite Chimique, (338-39), 55-63, (2010)

trace analysis

Book chapter, Lai Eet al., Molecularly Imprinted Polymer Submicron Particles Tailored for Extraction of Trace Estrogens in Water,
In: Trace Analysis with Nanomaterials, Pierce DT, Zhao JXJ (Eds.)
Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, 133-159, (2010)

trace analysis

Peng Y et al., Molecularly imprinted polymer layer-coated silica nanoparticles toward dispersive solid-phase extraction of trace sulfonylurea herbicides from soil and crop samples.
Analytica Chimica Acta, 674, (2), 190-200, (2010)

Trace contaminants

Fernández-Álvarez P et al., Removal and destruction of endocrine disrupting contaminants by adsorption with molecularly imprinted polymers followed by simultaneous extraction and phototreatment.
Journal of Hazardous Materials, 163, (2-3), 1107-1112, (2009)

Trace 17β-estradiol

Shi Y et al., Selective determination of trace 17β-estradiol in dairy and meat samples by molecularly imprinted solid-phase extraction and HPLC.
Food Chemistry, 126, (4), 1916-1925, (2011)

Zhao CS et al., BPA transfer rate increase using molecular imprinted polyethersulfone hollow fiber membrane.
Journal of Membrane Science, 310, (1-2), 38-43, (2008)

Transport Properties

Fan PM et al., Preparation of molecularly imprinted polymer membrane with blending trimethoprim-MIP and polysulfone and its transport properties.
Korean Journal Of Chemical Engineering, 26, (6), 1813-1820, (2009)

Transport property

Wang JY et al., Binding constant and transport property of S-Naproxen molecularly imprinted composite membrane.
Journal of Membrane Science, 331, (1-2), 84-90, (2009)

Liu XF et al., Preparation of a N, O-Bismethacryloyl Ethanolamine-based Tribenuron-methly Imprinted Polymeric Membrane over a Nylon-6 Support and Its Transport Selectivity.
Chemical Journal of Chinese Universities-Chinese, 30, (9), 1717-1723, (2009)

tribenuron-methyl

4,4,4-Trifluoro-1-phenyl-1,3-butanedione (4-TPB)

Trifunctional monomer

Prasad BB et al., Electrochemical sensor for folic acid based on a hyperbranched molecularly imprinted polymer-immobilized sol-gel-modified pencil graphite electrode.
Sensors and Actuators B: Chemical, 146, (1), 321-330, (2010)

TRIM

Rajkumar R et al., Analysis of recognition of fructose by imprinted polymers.
Talanta, 76, (5), 1119-1123, (2008)

trimethoprim

Rebelo TSCR et al., Trimethoprim-selective electrodes with molecularly imprinted polymers acting as ionophores and potentiometric transduction on graphite solid-contact.
Microchemical Journal, 98, (1), 21-28, (2011)

trimethylolpropane trimethacrylate

Morelli I et al., Molecularly imprinted submicronspheres for applications in a novel model biosensor-film.
Sensors and Actuators B: Chemical, 150, (1), 394-401, (2010)

2,4,6-Trinitrotoluene

Alizadeh T et al., A new molecularly imprinted polymer (MIP)-based electrochemical sensor for monitoring 2,4,6-trinitrotoluene (TNT) in natural waters and soil samples.
Biosensors and Bioelectronics, 25, (5), 1166-1172, (2010)

Trinitrotoluene

Nie DX et al., Two-dimensional molecular imprinting approach for the electrochemical detection of trinitrotoluene.
Sensors and Actuators B: Chemical, 156, (1), 43-49, (2011)

Trinitrotoluene

Zhang QY et al., Adsorption of TNT using beaded molecularly-imprinted polymer.
Chinese Journal of Energetic Materials, 17, (2), 249-250, (2009)

2,4,6-Trinitrotoluene (TNT)

Trammell SA et al., Electrochemical detection of TNT with in-line pre-concentration using imprinted diethylbenzene-bridged periodic mesoporous organosilicas.
Sensors and Actuators B: Chemical, 155, (2), 737-744, (2011)

Tri-O-acetyladenosine (TOAA)

Longo L et al., RNA nucleoside recognition by phthalocyanine-based molecularly imprinted polymers.
Journal of Polymer Research, 17, (5), 683-687, (2010)

Triterpene

Claude B et al., Selective solid-phase extraction of a triterpene acid from a plant extract by molecularly imprinted polymer.
Talanta, 75, (2), 344-350, (2008)

Triterpene

Claude B et al., Synthesis of a molecularly imprinted polymer for the solid-phase extraction of betulin and betulinic acid from plane bark.
Phytochemical Analysis, 21, (2), 180-185, (2010)

Tropical disease

Teles FSRR, Biosensors and rapid diagnostic tests on the frontier between analytical and clinical chemistry for biomolecular diagnosis of dengue disease: A review.
Analytica Chimica Acta, 687, (1), 28-42, (2011)

True absorption

Ghasemzadeh N et al., Highly selective artificial gel antibodies for detection and quantification of biomarkers in clinical samples. I. Spectrophotometric approach to design the calibration curve for the quantification.
Journal of Separation Science, 31, (22), 3945-3953, (2008)

Tryptophan

da Silva MS et al., Clean synthesis of molecular recognition polymeric materials with chiral sensing capability using supercritical fluid technology. Application as HPLC stationary phases.
Biosensors and Bioelectronics, 25, (7), 1742-1747, (2010)

Tryptophan

Qin L et al., Molecularly imprinted polymer prepared with bonded β-cyclodextrin and acrylamide on functionalized silica gel for selective recognition of tryptophan in aqueous media.
Journal of Chromatography A, 1187, (1-2), 94-102, (2008)

Tryptophan enantiomers

Chen ZD et al., Separation of tryptophan enantiomers with molecularly imprinted polypyrrole electrode column.
Chinese Chemical Letters, 21, (3), 353-356, (2010)

T138S CALB

Juhl PB et al., Engineering of Candida antarctica lipase B for hydrolysis of bulky carboxylic acid esters.
Journal of Biotechnology, 150, (4), 474-480, (2010)

T-2 toxin

De Smet D et al., Synthesis and application of a T-2 toxin imprinted polymer.
Journal of Chromatography A, 1217, (17), 2879-2886, (2010)

T-2 toxin

Gupta G et al., Supersensitive detection of T-2 toxin by the in situ synthesized π-conjugated molecularly imprinted nanopatterns. An in situ investigation by surface plasmon resonance combined with electrochemistry.
Biosensors and Bioelectronics, 26, (5), 2534-2540, (2011)

T-2 toxin

Lattanzio VMT et al., Current analytical methods for trichothecene mycotoxins in cereals.
TrAC Trends in Analytical Chemistry, 28, (6), 758-768, (2009)

Tumor marker

Chen CY et al., Diagnostic role of biliary pancreatic elastase for cholangiocarcinoma in patients with cholestasis.
Clinica Chimica Acta, 390, (1-2), 82-89, (2008)

Tunable detection window

Choong CL et al., Dynamic modulation of detection window in conducting polymer based biosensors.
Biosensors and Bioelectronics, 25, (10), 2384-2388, (2010)

Tunable stationary phase

Qu P et al., Molecularly imprinted magnetic nanoparticles as tunable stationary phase located in microfluidic channel for enantioseparation.
Journal of Chromatography A, 1217, (39), 6115-6121, (2010)

Two-dimensional correlation spectroscopy

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)

Two-dimensional materials

Yan CL et al., Two-dimensional imprinting of protein molecules.
Progress In Chemistry, 20, (6), 969-974, (2008)

Two-dimensional sensor

James D et al., Design of two-dimensional biomimetic uranyl optrode and its application to the analysis of natural waters.
Talanta, 74, (5), 1420-1427, (2008)

two-site model

Hu LY et al., Molecular Imprinting by 4-Hydroxybenzoic Acid: A Two-Site Model.
Separation Science And Technology, 45, (16), 2337-2344, (2010)

Tyramine detection

Huang JD et al., A molecularly imprinted electrochemical sensor based on multiwalled carbon nanotube-gold nanoparticle composites and chitosan for the detection of tyramine.
Food Research International, 44, (1), 276-281, (2011)

Tyrosinase

Sergeyeva TA et al., A portable sensor system for phenols detection based on molecularly-imprinted polymers with catalytic properties.
Ukrainskii Biokhimicheskii Zhurnal, 81, (1), 41-51, (2009)

Tyrosinase

Sergeyeva TA et al., Catalytic molecularly imprinted polymer membranes: Development of the biomimetic sensor for phenols detection.
Analytica Chimica Acta, 659, (1-2), 274-279, (2010)

Tyrosine sensor

Saumya V et al., In situ copper oxide modified molecularly imprinted polypyrrole film based voltammetric sensor for selective recognition of tyrosine.
Talanta, 85, (2), 1056-1062, (2011)

top