Imprinted Polymer templates and targets Index from mipdatabase.com

A: B: C: D: E: F: G: H: I: J: K: L: M: N: O: P: Q: R: S: T: U: V: W: X: Y: Z:
go to papers go to Journals go to authors go to keywords switch to patents switch to inventors switch to theses and dissertations back to top

RSS feed
This file created: 09/07/2011

This index is currently under construction, more items will be added soon.

Aβ1-40

Urraca JL et al., Polymeric Complements to the Alzheimer’s Disease Biomarker β-Amyloid Isoforms Aβ1-40 and Aβ1-42 for Blood Serum Analysis under Denaturing Conditions.
Journal of the American Chemical Society, 133, (24), 9220-9223, (2011)

Aβ1-42

Aβ33-40

Aβ33-42

AA

Roy AK et al., Molecularly imprinted polyaniline film for ascorbic acid detection.
Journal of Molecular Recognition, 24, (4), 700-706, (2011)

ABO blood groups

Seifner A et al., Synthetic receptors for selectively detecting erythrocyte ABO subgroups.
Analytica Chimica Acta, 651, (2), 215-219, (2009)

ABO subgroups

Seifner A et al., Synthetic receptors for selectively detecting erythrocyte ABO subgroups.
Analytica Chimica Acta, 651, (2), 215-219, (2009)

acenaphthene

Lieberzeit PA et al., Polymers imprinted with PAH mixtures-comparing fluorescence and QCM sensors.
Analytical and Bioanalytical Chemistry, 392, (7-8), 1405-1410, (2008)

acenaphthene

Krupadam RJ et al., Fluorescence Spectrophotometer Analysis of Polycyclic Aromatic Hydrocarbons in Environmental Samples Based on Solid Phase Extraction Using Molecularly Imprinted Polymer.
Environmental Science & Technology, 43, (8), 2871-2877, (2009)

acephate

Wei CP et al., Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor.
Talanta, 83, (5), 1422-1427, (2011)

4-acetamido-2-ethoxybenzoic acid methyl ester

Khorrami AR et al., Synthesis and Evaluation of a Molecularly Imprinted Polymer for Solid Phase Extraction of Ethopabate from Chicken Tissue.
Separation Science And Technology, 45, (3), 404-412, (2010)

4-acetamidophenol

Rosengren-Holmberg JP et al., Synthesis and ligand recognition of paracetamol selective polymers: semi-covalent versus non-covalent molecular imprinting.
Organic & Biomolecular Chemistry, 7, (15), 3148-3155, (2009)

4-acetamidophenol

Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)

4-acetamidophenyl-(4-vinylphenyl) carbonate

acetaminophen

Liu Y et al., Rational Design and Study on Recognition Property of Paracetamol-Imprinted Polymer.
Applied Biochemistry and Biotechnology, 160, (2), 328-342, (2010)

acetanilide

Lu CY et al., Molecularly imprinted polymer with calix[4]arene derivative for the recognition of acetanilide.
Chinese Journal of Chemistry, 22, (3), 275-278, (2004)

acetazolamide

Khodadadian M et al., Computer-assisted design and synthesis of molecularly imprinted polymers for selective extraction of acetazolamide from human plasma prior to its voltammetric determination.
Talanta, 81, (4-5), 1446-1453, (2010)

acetochlor

Dong CK et al., Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations.
Analytica Chimica Acta, 647, (1), 117-124, (2009)

acetochlor

Hu XG et al., Novel liquid-liquid-solid microextraction method with molecularly imprinted polymer-coated stainless steel fiber for aqueous sample pretreatment.
Journal of Chromatography A, 1218, (25), 3935-3939, (2011)

acetominophen

Yang ML et al., Molecularly imprinted polymers with p-acetaminophenol and its positional isomers as templates.
Analytical Letters, 37, (10), 2043-2052, (2004)

acetominophen

Cervini P et al., Evaluation of the Analytical Potentialities of a Composite Electrode Modified with Molecularly Imprinted Polymers.
Analytical Letters, 42, (13), 1940-1957, (2009)

acetophenone

Kolarz BN et al., Catalytic activity of molecular imprinted vinylpyridine/acrylonitrile/divinylbenzene terpolymers with guanidyl ligands-Cu(II) inside the active centres.
Polimery, 53, (11-12), 848-853, (2008)

acetylsalicylic acid

Liu YM et al., Synthesis and Evaluation of Molecularly Imprinted Polymers Using Acetylsalicylic Acid as Template.
Journal of Instrumental Analysis, 26, (2), 165-169, (2007)

acetyl salicylic acid

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)

acidic pharmaceuticals

Zorita S et al., Selective determination of acidic pharmaceuticals in wastewater using molecularly imprinted solid-phase extraction.
Analytica Chimica Acta, 626, (2), 147-154, (2008)

acid NSAIDs

Siewing A, The Extraction of Acid NSAIDs from Muscle Tissue using Molecularly Imprinted Polymer SPE.
The Reporter, 29, (1), 18-19, (2011)

acifluorfen

Xu ZF et al., Combination of hydrophobic effect and electrostatic interaction in imprinting for achieving efficient recognition in aqueous media.
Carbohydrate Polymers, 79, (3), 642-647, (2010)

Ac-L-Trp

Yu C et al., Enantiomeric recognition by molecularly imprinted polymers using hydrophobic interactions.
Analytical Letters, 30, (12), 2123-2140, (1997)

Ac-L-Trp

Yoshikawa M et al., Chiral recognition of N-a-acetyltryptophans with molecularly imprinted polymeric membranes containing DVNE derivatives.
Sen’i Gakkaishi, 54, (2), 77-84, (1998)

acryloyloxyhexyl cholamide

Idziak I et al., Polymer-catalyzed aminolysis of covalently imprinted cholic acid derivative.
Tetrahedron Letters, 40, (52), 9167-9170, (1999)

ACZ

Muhammad T et al., Preparation of molecular imprinted polymer fluorescence sensing membrane and its application to the determination of amiodarone.
Chinese Journal of Analytical Chemistry, 35, (7), 1059-1062, (2007)

adenine

Li SJ et al., Modulated molecular recognition by a temperature-sensitive molecularly-imprinted polymer.
Journal of Polymer Science Part A: Polymer Chemistry, 47, (9), 2352-2360, (2009)

adenine

Pietrzyk A et al., Molecularly imprinted polymer (MIP) based piezoelectric microgravimetry chemosensor for selective determination of adenine.
Biosensors and Bioelectronics, 25, (11), 2522-2529, (2010)

adenine

Wybranska K et al., Adenine Molecularly Imprinted Polymer-Coated Submicrometer Silica Gel Particles.
Chemistry of Materials, 22, (18), 5392-5399, (2010)

adenosine

Yoshikawa M et al., Surface plasmon resonance studies on molecularly imprinted films.
Journal of Applied Polymer Science, 110, (5), 2826-2832, (2008)

adenosine

Wybranska K et al., Adenine Molecularly Imprinted Polymer-Coated Submicrometer Silica Gel Particles.
Chemistry of Materials, 22, (18), 5392-5399, (2010)

adenosine 3’,5’-cyclic monophosphate

Sadowska M et al., Molecularly Imprinted Thin Polymeric Film as a Fluorescent Sensor for Nucleotides.
Molecular Crystals And Liquid Crystals, 486, (1), 203-212, (2008)

adenosine 3’,5’-cyclic monophosphate

Wandelt B et al., Polymeric Sensory Systems Based on Molecular Imprinting for Identification and Separation of Molecules and Bigger Biological Objects.
Molecular Crystals And Liquid Crystals, 486, (1), 257-270, (2008)

adenosine-5’-monophosphate

Breton F et al., Selective adenosine-5’-monophosphate uptake by water-compatible molecularly imprinted polymer.
Analytica Chimica Acta, 616, (2), 222-229, (2008)

adenosine 5’-monophosphate

Breton F et al., Molecular imprinting of AMP by an ionic-noncovalent dual approach.
Journal of Separation Science, 32, (19), 3285-3291, (2009)

adenosine triphosphate

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)

adrenalin

Huang BY et al., Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography.
Journal of Chromatography A, 1218, (6), 849-855, (2011)

adrenalin

Sartori LR et al., Flow-based method for epinephrine determination using a solid reactor based on molecularly imprinted poly(FePP-MAA-EGDMA).
Materials Science and Engineering: C, 31, (2), 114-119, (2011)

adrenaline

Hsu CW et al., Electrochemical epinephrine sensor using artificial receptor synthesized by sol-gel process.
Sensors and Actuators B: Chemical, 134, (2), 680-686, (2008)

adrenaline

Las�kov� M et al., Molecularly imprinted polymer for solid-phase extraction of ephedrine and analogs from human plasma.
Journal of Separation Science, 32, (7), 1036-1042, (2009)

aflatoxin

Sergeyeva TA et al., Sensor system based on molecularly-imprinted polymer membranes for the selective recognition of aflatoxin B1.
Ukrainskii Biokhimicheskii Zhurnal, 80, (3), 84-93, (2008)

aflatoxin B1

Sergeyeva TA et al., Aflatoxin-selective molecularly-imprinted polymer membranes based on acrylate-polyurethane semi-interpenetrating polymer networks.
Ukrainskii Biokhimicheskii Zhurnal, 79, (5), 109-115, (2007)

aflatoxin B1

Sergeyeva TA et al., Sensor system based on molecularly-imprinted polymer membranes for the selective recognition of aflatoxin B1.
Ukrainskii Biokhimicheskii Zhurnal, 80, (3), 84-93, (2008)

Ag+

Huo HY et al., Adsorption of Ag+ by a surface molecular-imprinted biosorbent.
Chemical Engineering Journal, 150, (1), 139-144, (2009)

Ag+

Huo HY et al., Effect of trace Ag+ adsorption on degradation of organic dye wastes.
Biochemical Engineering Journal, 43, (1), 2-7, (2009)

Ag+

Chen EZ et al., Antimicrobial properties of silver nanoparticles synthesized by bioaffinity adsorption coupled with TiO2 photocatalysis.
Journal of Chemical Technology & Biotechnology, 86, (3), 421-427, (2011)

Ag(I)

Harkins DA et al., Preparation of site-selective ion-exchange resins.
Separation Science And Technology, 26, (3), 345-354, (1991)

Ag(I)

Shawky HA, Synthesis of ion-imprinting chitosan/PVA crosslinked membrane for selective removal of Ag(I).
Journal of Applied Polymer Science, 114, (5), 2608-2615, (2009)

Ag(I)

Wang XW et al., Enrichment and separation of silver from waste solutions by metal ion imprinted membrane.
Hydrometallurgy, 100, (1-2), 82-86, (2009)

β-agonists

Kronauer S et al., Class-Selective Extraction and Analysis of β-Receptor Agonists and Antagonists using Molecularly Imprinted Polymer SPE. The Reporter Europe,
29, 8-10, (2008)

β-agonists

Widstrand VP, The simultaneous class-selective extraction and analysis of beta-blockers and beta-agonists using molecularly imprinted polymer SPE.
American Laboratory, 40, (9), 6-7, (2008)

β2-agonists

Xu ZG et al., Investigation of ractopamine molecularly imprinted stir bar sorptive extraction and its application for trace analysis of β2-agonists in complex samples.
Journal of Chromatography A, 1217, (22), 3612-3618, (2010)

agroclavine

Suedee R et al., Recognition Properties and Competitive Assays of a Dual Dopamine/Serotonin Selective Molecularly Imprinted Polymer.
International Journal of Molecular Sciences, 9, (12), 2333-2356, (2008)

Al3+

Demircelik AH et al., Molecular Recognition-Based Detoxification of Aluminum in Human Plasma.
Journal of Biomaterials Science-Polymer Edition, 20, (9), 1235-1258, (2009)

Ala-Lys

Schirmer C et al., Synthesis and Evaluation of Molecularly Imprinted Polymers (MIP) with Affinity for the Polypeptide Nisin.
Food Analytical Methods, 2, (4), 257-263, (2009)

alanine

BelBruno JJ et al., Capacitive sensing of amino acids in molecularly imprinted nylon films.
Sensors and Actuators B: Chemical, 155, (2), 915-918, (2011)

alanine anilide

Hamase K et al., Selective masking of amino groups during fluorescence derivatization in the presence of a molecular imprint polymer.
Analytical Sciences, 16, (4), 417-419, (2000)

albendazole

Cacho C et al., Molecularly imprinted polymers: An analytical tool for the determination of benzimidazole compounds in water samples.
Talanta, 78, (3), 1029-1035, (2009)

albumin

Long Y et al., Molecular imprinted polymer with positively charged assistant recognition polymer chains for adsorption/enrichment of low content target protein.
Chinese Science Bulletin, 53, (17), 2617-2623, (2008)

albumin

Wang HF et al., m-Aminophenylboronic acid as a functional monomer for fabricating molecularly imprinted polymer for the recognition of bovine serum albumin.
Reactive and Functional Polymers, 68, (9), 1291-1296, (2008)

albumin

Zhao KY et al., Bovine serum albumin imprinted calcium phosphate/polyacrylate/alginate multi-hybrid polymer microspheres in inverse-phase suspension.
E-Polymers, Art. No. 100-(2008)

albumin

Hu CH et al., Albumin molecularly imprinted polymer prepared with a semi-rigid crosslinker in mixed organic/aqueous media.
Microchimica Acta, 165, (3), 399-405, (2009)

albumin

Hu CH et al., Albumin molecularly imprinted polymer with high template affinity -- Prepared by systematic optimization in mixed organic/aqueous media.
Microchemical Journal, 91, (1), 53-58, (2009)

albumin

Lee MH et al., Formation and Recognition Characteristics of Albumin-imprinted Poly(Ethylene-co-Vinyl-Alcohol) Membranes.
Journal of Nanoscience and Nanotechnology, 9, (6), 3469-3477, (2009)

Albumin

Lee MH et al., Synthesis of Magnetic Molecularly Imprinted Poly(ethylene-co-vinyl alcohol) Nanoparticles and Their Uses in the Extraction and Sensing of Target Molecules in Urine.
ACS Applied Materials & Interfaces, 2, (6), 1729-1736, (2010)

Alcian Blue 8GX

Liu ZH et al., Cation-Selective Microcontact Printing Based on Surface-Molecular-Imprinted Layer-by-Layer Films.
Advanced Materials, 22, (24), 2689-2693, (2010)

alfuzosin

Hugon-Chapuis F et al., Selective and automated sample pretreatment by molecularly imprinted polymer for the analysis of the basic drug alfuzosin from plasma.
Journal of Chromatography A, 1196-1197, (1-2), 73-80, (2008)

algae

Darder Ma et al., Algae-silica systems as functional hybrid materials.
Journal of Materials Chemistry, 20, (42), 9362-9369, (2010)

Al(III)

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)

Al(III)

Khajeh M et al., Imprinted Polymer Particles for Aluminum Uptake: Synthesis and Analytical Applications.
Journal of Macromolecular Science, Part A, 46, (5), 526-532, (2009)

allergen

Sontimuang C et al., Interdigitated capacitive biosensor based on molecularly imprinted polymer for rapid detection of Hev b1 latex allergen.
Analytical Biochemistry, 410, (2), 224-233, (2011)

alpha-blocker

alprenolol

Hu XG et al., Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of β-blockers in urine and plasma samples.
Journal of Chromatography A, 1216, (2), 190-197, (2009)

aluminium

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)

aluminium

Al-Kindy SMZ et al., Fluorimetric determination of aluminium using Sequential Injection Analysis (SIA): State of our art and future developments.
Instrumentation Science & Technology, 34, (6), 619-633, (2006)

aluminium(III)-morin chelate

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)

aluminum

Al-Kindy S et al., Fluorimetric monitoring of molecular imprinted polymer recognition events for aluminium.
Analytical Letters, 35, (11), 1763-1774, (2002)

aluminum ion

Khajeh M et al., Imprinted Polymer Particles for Aluminum Uptake: Synthesis and Analytical Applications.
Journal of Macromolecular Science, Part A, 46, (5), 526-532, (2009)

AM

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)

Amadori compound

Chuang SW et al., Electrochemical characterisation of a conductive polymer molecularly imprinted with an Amadori compound.
Biosensors and Bioelectronics, 24, (10), 3170-3173, (2009)

Amaranth

Luo XB et al., Removal of water-soluble acid dyes from water environment using a novel magnetic molecularly imprinted polymer.
Journal of Hazardous Materials, 187, (1-3), 274-282, (2011)

amentoflavone

Tian M et al., Preparation of Molecularly Imprinted Polymer for Extracting Flavones from Chamaecyparis Obtusa.
Analytical Letters, 44, (5), 737-746, (2011)

ametryn

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)

ametryn

Djozan D et al., Preparation of new solid phase micro extraction fiber on the basis of atrazine-molecular imprinted polymer: Application for GC and GC/MS screening of triazine herbicides in water, rice and onion.
Analytica Chimica Acta, 616, (2), 152-159, (2008)

ametryn

Djozan D et al., Preparation and binding study of solid-phase microextraction fiber on the basis of ametryn-imprinted polymer: Application to the selective extraction of persistent triazine herbicides in tap water, rice, maize and onion.
Journal of Chromatography A, 1216, (12), 2211-2219, (2009)

ametryn

Hu YL et al., Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system.
Talanta, 79, (3), 576-582, (2009)

ametryn

Koohpaei AR et al., Optimization of solid-phase extraction using developed modern sorbent for trace determination of ametryn in environmental matrices.
Journal of Hazardous Materials, 170, (2-3), 1247-1255, (2009)

ametryn

Djozan D et al., Evaluation of a new method for chemical coating of aluminum wire with molecularly imprinted polymer layer. Application for the fabrication of triazines selective solid-phase microextraction fiber.
Analytica Chimica Acta, 674, (1), 40-48, (2010)

ametryn

Wu SQ et al., Recognition characteristics of molecularly imprinted microspheres for triazine herbicides using hydrogen-bond array strategy and their analytical applications for corn and soil samples.
Journal of Chromatography A, 1218, (10), 1340-1346, (2011)

AMI

Freitas MB et al., Amitriptyline and Nortriptyline in Plasma: Solid-Phase Extraction in Molecularly Imprinted Polymers and Silica Octadecil for High Performance Liquid Chromatography Analysis.
Latin American Journal of Pharmacy, 28, (1), 70-79, (2009)

amino acids

Kong Y et al., Enantioselective recognition of amino acids based on molecularly imprinted polyaniline electrode column.
Electrochimica Acta, 56, (11), 4070-4074, (2011)

aminoantipyrine

Fan ZL et al., Investigation of Molecularly Imprinted Polymer Rod with Aminoantipyrine as Template by In-situ Polymerization Method and Their Separation Characteristics.
Chinese Journal of Chromatography, 21, (3), 199-201, (2003)

4-aminoazobenzene

Zhang YH et al., Adsorptive characterization of the 4-aminoazobenzene imprinted polymer and its application in detection of trace substance.
Analytical Lab, 29, (4), 103-106, (2010)

amino biotin

Izenberg NR et al., Astrobiological molecularly imprinted polymer sensors.
Planetary and Space Science, 57, (7), 846-853, (2009)

2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine

Frandsen H, Biomonitoring of urinary metabolites of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) following human consumption of cooked chicken.
Food and Chemical Toxicology, 46, (9), 3200-3205, (2008)

aminomethylphosphonic acid

Kittlaus S et al., New Approaches for Determination of Glyphosate and Aminomethylphosphonic Acid from Different Tea Samples-Prospects and Limits of Cleanup with Molecularly Imprinted Polymer and Titanium Dioxide.
Journal of AOAC International, 92, (3), 703-714, (2009)

4-aminophenol

Santos W et al., A catalytically active molecularly imprinted polymer that mimics peroxidase based on hemin: application to the determination of p-aminophenol.
Analytical and Bioanalytical Chemistry, 389, (6), 1919-1929, (2007)

4-aminophenol

Santos WJR et al., Synthesis, Characterization and Kinetics of Catalytically Active Molecularly Imprinted Polymers for the Selective Recognition of 4-Aminophenol.
Journal of the Brazilian Chemical Society, 20, (5), 820-825, (2009)

4-aminophenol

Neto JdRM et al., A hemin-based molecularly imprinted polymer (MIP) grafted onto a glassy carbon electrode as a selective sensor for 4-aminophenol amperometric.
Sensors and Actuators B: Chemical, 152, (2), 220-225, (2011)

4-aminopyridine

Lai JP et al., Study on recognition mechanism of molecularly imprinted microsphere synthesized from aqueous solution.
Acta Chimica Sinica, 60, (2), 322-327, (2002)

4-aminopyridine

Yan WY et al., Recognition mechanism of 4-aminopyridine molecularly imprinted polymer-based monolithic capillary column in electrochromatography.
Analytical Lab, 22, (2), 5-7, (2003)

2-aminopyridine

Cummins W et al., Thermal desorption characterisation of molecularly imprinted polymers. Part I: a novel study using direct-probe GC-MS analysis.
Analytical and Bioanalytical Chemistry, 391, (4), 1237-1244, (2008)

2-aminopyridine

Holland N et al., Thermal desorption characterisation of molecularly imprinted polymers. Part II: Use of direct probe GC-MS analysis to study crosslinking effects.
Analytical and Bioanalytical Chemistry, 391, (4), 1245-1253, (2008)

2-aminopyridine

Osmani Q et al., The use of FTIR and NMR spectroscopies to study prepolymerisation interactions in nitrogen heterocycles.
Analytical and Bioanalytical Chemistry, 391, (4), 1229-1236, (2008)

2-aminopyridine

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)

4-aminopyridine

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)

4-amino pyridine

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)

2-aminopyridine

Najafi M et al., Molecularly imprinted polymer-based potentiometric sensor for 2-aminopyridine as a potential impurity in piroxicam.
Drug Testing and Analysis, 3, (2), 132-137, (2011)

2-aminothiazoline-4-carboxylic acid

Jackson R et al., Molecularly imprinted polymer stir bar sorption extraction and electrospray ionization tandem mass spectrometry for determination of 2-aminothiazoline-4-carboxylic acid as a marker for cyanide exposure in forensic urine analysis.
Analytical Methods, 2, (5), 552-557, (2010)

2-aminothiazoline-4-carboxylic acid

Petrikovics I et al., Determining the biomarker cyanide metabolite 2-aminothiazoline-4-carboxylic acid in mice liver after cyanide exposure.
Toxicology Letters, 196, (Supplement 1), S295-S296, (2010)

Amiodarone

amitriptyline

amlodipine

Amut E et al., In situ polymerization preparation of chiral molecular imprinting polymers monolithic column for amlodipine and its recognition properties study.
Journal of Polymer Research, 17, (3), 401-409, (2010)

amobarbital

Lin QM et al., Synthesis and Characterization of Molecularly Imprinted Polymers for Recognition of Amobarbital.
Journal of Instrumental Analysis, 23, (3), 43-45, (2004)

amobarbital

Hoshina K et al., Molecularly imprinted polymers for simultaneous determination of antiepileptics in river water samples by liquid chromatography-tandem mass spectrometry.
Journal of Chromatography A, 1216, (25), 4957-4962, (2009)

AMOX

Guerreiro JRL et al., Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials.
European Food Research and Technology, 232, (1), 39-50, (2011)

amoxicillin

Beltran A et al., Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer.
Journal of Separation Science, 31, (15), 2868-2874, (2008)

amoxicillin

Beltran A et al., Molecularly imprinted solid-phase extraction of cephalexin from water-based matrices.
Journal of Separation Science, 32, (19), 3319-3326, (2009)

amoxicillin

Wan FW et al., Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin.
Analytical Letters, 43, (6), 1033-1045, (2010)

amoxicillin

Yin JF et al., Pseudo-template molecularly imprinted polymer for selective screening of trace β-lactam antibiotics in river and tap water.
Journal of Chromatography A, 1217, (33), 5420-5426, (2010)

amoxicillin

Zhang XP et al., Determination of β-lactam antibiotics in milk based on magnetic molecularly imprinted polymer extraction coupled with liquid chromatography-tandem mass spectrometry.
Journal of Chromatography B, 878, (32), 3421-3426, (2010)

amoxicillin

Guerreiro JRL et al., Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials.
European Food Research and Technology, 232, (1), 39-50, (2011)

AMP

Breton F et al., Selective adenosine-5’-monophosphate uptake by water-compatible molecularly imprinted polymer.
Analytica Chimica Acta, 616, (2), 222-229, (2008)

AMP

Breton F et al., Molecular imprinting of AMP by an ionic-noncovalent dual approach.
Journal of Separation Science, 32, (19), 3285-3291, (2009)

AMP

Gonz�lez-Mari�o I et al., Comparison of molecularly imprinted, mixed-mode and hydrophilic balance sorbents performance in the solid-phase extraction of amphetamine drugs from wastewater samples for liquid chromatography-tandem mass spectrometry determination.
Journal of Chromatography A, 1216, (48), 8435-8441, (2009)

AMP

Puoci F et al., New restricted access materials combined to molecularly imprinted polymers for selective recognition/release in water media.
European Polymer Journal, 45, (6), 1634-1640, (2009)

AMPA

amphetamine

Anon, MIP Technologies And Supelco Launch A New Selective SPE Product For The Extraction Of Amphetamine And Related Drugs. Medical News Today,
(2008)

amphetamine

Widstrand C et al., The Extraction of Amphetamine and Related Drugs using SupelMIP� Molecularly Imprinted Polymer SPE. The Reporter Europe,
31, 11-13, (2008)

amphetamine

Chang J et al., Application of molecularly imprinted solid-phase extraction for separating and assaying amphetamines in blood samples.
Chinese Journal of Forensic Medicine, 26, (1), 22-25, (2011)

amphetamines

AMPI

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)

ampicillin

L�bke C et al., Imprinted polymers prepared with stoichiometric template-monomer complexes: Efficient binding of ampicillin from aqueous solutions.
Macromolecules, 33, (14), 5098-5105, (2000)

ampicillin

Shi XZ et al., Water Compatible Molecularly Imprinted Polymer Microspheres for Extraction of Ampicillin in Foods.
Analytical Letters, 43, (5), 757-767, (2010)

ampicillin

AMX

Beltran A et al., Selective solid-phase extraction of amoxicillin and cephalexin from urine samples using a molecularly imprinted polymer.
Journal of Separation Science, 31, (15), 2868-2874, (2008)

AMX

Beltran A et al., Molecularly imprinted solid-phase extraction of cephalexin from water-based matrices.
Journal of Separation Science, 32, (19), 3319-3326, (2009)

α-amylase

Silvestri D et al., Poly(ethylene-co-vinyl alcohol) Membranes with Specific Adsorption Properties for Potential Clinical Application.
Separation Science And Technology, 42, (13), 2829-2847, (2007)

amylase

Lee MH et al., Optical recognition of salivary proteins by use of molecularly imprinted poly(ethylene-co-vinyl alcohol)/quantum dot composite nanoparticles.
Analytical and Bioanalytical Chemistry, 397, (4), 1457-1466, (2010)

β-amyloid isoforms

β-amyloid protein

Anabaena sp. PCC7120

Darder Ma et al., Algae-silica systems as functional hybrid materials.
Journal of Materials Chemistry, 20, (42), 9362-9369, (2010)

anatoxin B1

anatoxin B2

anatoxin G2

2-AnCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)

9-AnCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)

9-AnCOOH

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)

andrographolide

Yin XY et al., The Spectroscopy Analysis of Intermolecular Interaction Between the Template Molecule and Functional Monomer Before Polymerization.
Spectroscopy and Spectral Analysis, 30, (8), 2211-2214, (2010)

andrographolide

Proceeding, Yin XY et al, Preparation and recognition properties of andrographolide molecularly imprinted ploymer microspheres,
In: Advanced Materials Research, Zhang GJ, Xu J (Eds.), 777-782, (2010)

andrographolide

Yin XY et al., Development of andrographolide molecularly imprinted polymer for solid-phase extraction.
Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 79, (1), 191-196, (2011)

1,4-androstadiene-3, 17-dione

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)

δ(4) -androstene-3, 17-dione

Rachkov AE et al., Molecularly imprinted polymers as artificial steroid receptors.
Polymers for Advanced Technologies, 9, (8), 511-519, (1998)

angiotensin

Rachkov A et al., Molecularly imprinted polymers prepared in aqueous solution selective for [Sar(1),Ala(8)]angiotensin II.
Analytica Chimica Acta, 504, (1), 191-197, (2004)

angiotensin II

Lauten EH et al., Intelligent drug release using molecular imprinting methods. Recognitive systems for angiotensin II.
Journal of Drug Delivery Science and Technology, 19, (6), 391-399, (2009)

anhydrotetracycline

Mojica ER et al., Tetracycline speciation during molecular imprinting in xerogels results in class-selective binding.
Analyst, 136, (4), 749-755, (2011)

anion

Kamata K et al., Size-dependent photochemical anion recognition by ion-templated polyviologen film.
Electrochemistry, 67, (12), 1189-1191, (1999)

β-antagonists

Kronauer S et al., Class-Selective Extraction and Analysis of β-Receptor Agonists and Antagonists using Molecularly Imprinted Polymer SPE. The Reporter Europe,
29, 8-10, (2008)

2-anthracenecaboxylic acid

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)

9-anthracenecaboxylic acid

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)

Anthracene-9-carboxylic acid

Liu YT et al., Enhanced photocatalysis on TiO2 nanotube arrays modified with molecularly imprinted TiO2 thin film.
Journal of Hazardous Materials, 182, (1-3), 912-918, (2010)

anthrax protective antigen

Tai DF et al., Epitope-Cavities Generated by Molecularly Imprinted Films Measure the Coincident Response to Anthrax Protective Antigen and Its Segments.
Analytical Chemistry, 82, (6), 2290-2293, (2010)

9-anthrol

Bright FV et al., Dynamics Within Site Selectively Templated and Tagged Xerogel Sensor Platforms.
Applied Spectroscopy, 64, (10), 1073-1077, (2010)

antibody

Uzun L et al., Hepatitis B surface antibody purification with hepatitis B surface antibody imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-l-tyrosine methyl ester) particles.
Journal of Chromatography B, 877, (3), 181-188, (2009)

antibody replicas

Schirhagl R et al., Chemosensors for Viruses Based on Artificial Immunoglobulin Copies.
Advanced Materials, 22, (18), 2078-2081, (2010)

antiepileptics

anti-insulin antibodies

Schirhagl R et al., Comparing biomimetic and biological receptors for insulin sensing.
Chemical Communications, (46), 3128-3130, (2010)

anti-insulin IgG

Schirhagl R et al., Comparing biomimetic and biological receptors for insulin sensing.
Chemical Communications, (46), 3128-3130, (2010)

4AP

Lai JP et al., Study on recognition mechanism of molecularly imprinted microsphere synthesized from aqueous solution.
Acta Chimica Sinica, 60, (2), 322-327, (2002)

2-AP

Najafi M et al., Molecularly imprinted polymer-based potentiometric sensor for 2-aminopyridine as a potential impurity in piroxicam.
Drug Testing and Analysis, 3, (2), 132-137, (2011)

APAP

Cervini P et al., Evaluation of the Analytical Potentialities of a Composite Electrode Modified with Molecularly Imprinted Polymers.
Analytical Letters, 42, (13), 1940-1957, (2009)

4-APh

apigenin

Li LL et al., Preparation and spectral characterization of apigenin molecularly imprinted polymer.
Acta Pharmaceutica Sinica, 44, (8), 868-872, (2009)

apigenin

He M et al., Recognition property and mechanism of molecularly imprinted polymers of Apigenin.
Journal of Jiangsu University (Natural Science Edition), 31, (5), 596-600, (2010)

apigenin

He M et al., Preparation and imprinting efficiency evaluation of molecularly imprinted polymer of apigenin.
Ion Exchange and Adsorption, 26, (6), 514-523, (2010)

aptamer

Evtugyn G et al., Molecularly Imprinted Polymerized Methylene Green as a Platform for Electrochemical Sensing of Aptamer-Thrombin Interactions.
Electroanalysis, 21, (11), 1272-1277, (2009)

2-apy

Holland N et al., The influence of polymer morphology on the performance of molecularly imprinted polymers.
Polymer, 51, (7), 1578-1584, (2010)

Apy

Liu XY et al., Investigation of selective molecular interactions using two-dimensional Fourier transform IR spectroscopy.
Analytical and Bioanalytical Chemistry, 397, (1), 339-343, (2010)

Apy

Liu XY et al., Recognition ability of temperature responsive molecularly imprinted polymer hydrogels.
Soft Matter, 7, (5), 1986-1993, (2011)

Arg-Gly-Asp

Papaioannou E et al., Molecularly imprinted polymers for RGD selective recognition and separation.
Amino Acids, 36, (3), 563-569, (2009)

arginine

Lacasta S et al., Chiral Imprinting with Amino Acids of Ordered Mesoporous Silica Exhibiting Enantioselectivity after Calcination.
Chemistry of Materials, 23, (5), 1280-1287, (2011)

Armillarisin A

Su L et al., Synthesis and evaluation of Armillarisin A -imprinted polymer on silica surface.
Chemistry Bulletin, 72, (8), 749-753, (2009)

Arsenic

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water,
Beighley REII, Kilgore MW (Eds.), 356, (2011)

Arsenic

Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)

arsenic ion

Proceeding, Jahantigh N, Molecular Imprinted Polymer (MIP) for arsenic extraction from environmental water and biological samples,
Collery P, Maynard I, Theophanides T, Khassanova L, Collery T (Eds.), 247-251, (2008)

arsenic ion

Liu BJ et al., As(III) removal from aqueous solution using α-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)

artemisinin

Gong XY et al., Preparation of molecularly imprinted polymers for artemisinin based on the surfaces of silica gel.
Journal of Biotechnology, 153, (1-2), 8-14, (2011)

AS

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation And Purification Technology, 74, (1), 144-153, (2010)

AsCl3

ascorbic acid

�zcan L et al., Electrochemical preparation of a molecularly imprinted polypyrrole-modified pencil graphite electrode for determination of ascorbic acid.
Sensors, 8, (9), 5792-5805, (2008)

ascorbic acid

Prasad BB et al., Molecularly imprinted polymer-based solid-phase microextraction fiber coupled with molecularly imprinted polymer-based sensor for ultratrace analysis of ascorbic acid.
Journal of Chromatography A, 1198-1199, (1-2), 59-66, (2008)

ascorbic acid

Prasad BB et al., Ascorbic acid sensor based on molecularly imprinted polymer-modified hanging mercury drop electrode.
Materials Science and Engineering: C, 29, (4), 1082-1087, (2009)

ascorbic acid

Roy AK et al., Molecularly imprinted polyaniline film for ascorbic acid detection.
Journal of Molecular Recognition, 24, (4), 700-706, (2011)

As(III)

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water,
Beighley REII, Kilgore MW (Eds.), 356, (2011)

As(III)

Liu BJ et al., As(III) removal from aqueous solution using α-Fe2O3 impregnated chitosan beads with As(III) as imprinted ions.
Desalination, 272, (1-3), 286-292, (2011)

As(III)

Liu BJ et al., Removal of arsenic from Laminaria japonica Aresch juice using As(III)-imprinted chitosan resin.
European Food Research and Technology, 232, (5), 911-917, (2011)

ASP

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)

aspartic acid

Monier M et al., Preparation of cross-linked chitosan/glyoxal molecularly imprinted resin for efficient chiral resolution of aspartic acid isomers.
Biochemical Engineering Journal, 51, (3), 140-146, (2010)

aspirin

Liu YM et al., Synthesis and Evaluation of Molecularly Imprinted Polymers Using Acetylsalicylic Acid as Template.
Journal of Instrumental Analysis, 26, (2), 165-169, (2007)

aspirin

Kan XW et al., Magnetic molecularly imprinted polymer for aspirin recognition and controlled release.
Nanotechnology, 20, (16), Article No. 165601-(2009)

aspirin

Byun HS et al., Selective separation of aspirin using molecularly imprinted polymers.
Separation And Purification Technology, 74, (1), 144-153, (2010)

astaxanthin

Bi W et al., Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste.
Journal of Chromatography B, 878, (24), 2243-2248, (2010)

AS(V)

Proceeding, Kalita H et al, Novel Arsenic Ion-Imprinted Polymer: Simultaneous Removal As(III) and As(V) from Water,
Beighley REII, Kilgore MW (Eds.), 356, (2011)

ATC

Mojica ER et al., Tetracycline speciation during molecular imprinting in xerogels results in class-selective binding.
Analyst, 136, (4), 749-755, (2011)

ATCA

atenolol

He JF et al., Synthesis of receptor mimicking polymers and their adsorption behavior.
Journal of Instrumental Analysis, 24, (3), 6-9, (2005)

atenolol

Andreetta HA et al., Fluorescence Detection of Atenolol Using a Molecular Imprinted Polymer.
Analytical Letters, 41, (1), 36-45, (2008)

atenolol

Bompart M et al., Direct detection of analyte binding to single molecularly imprinted polymer particles by confocal Raman spectroscopy.
Biosensors and Bioelectronics, 25, (3), 568-571, (2009)

atenolol

Proceeding, Yu JY et al, Molecularly imprinted polymer microspheres prepared by precipitation polymerization for atenolol recognition,
In: Advanced Materials Research, Liu XH, Jiang ZY, Han JT (Eds.), 1192-1198, (2010)

atenolol

Zaidi SA et al., Open tubular capillary columns with basic templates made by the generalized preparation protocol in capillary electrochromatography chiral separation and template structural effects on chiral separation capability.
Journal of Chromatography A, 1218, (9), 1291-1299, (2011)

ATP

Matsui J et al., An approach to peptide-based ATP receptors by a combination of random selection, rational design, and molecular imprinting.
Biosensors and Bioelectronics, 25, (3), 563-567, (2009)

atrazine

Matsui J et al., Atrazine-selective polymer prepared by molecular imprinting technique.
Chemistry Letters, 24, (6), 489-489, (1995)

atrazine

Dauwe C et al., Influence of template basicity and hydrophobicity on the molecular recognition properties of molecularly imprinted polymers.
Journal of Chromatography A, 753, (2), 191-200, (1996)

atrazine

Matsui J et al., Design and preparation of molecularly imprinted atrazine-receptor polymers: Investigation of functional monomers and solvents.
Analytical Sciences, 14, (4), 699-702, (1998)

atrazine

Takeuchi T et al., Combinatorial molecular imprinting for formation of atrazine decomposing polymers.
Chemistry Letters, 30, (6), 530-531, (2001)

atrazine

Shoji R et al., Atrazine sensor based on molecularly imprinted polymer-modified gold electrode.
Analytical Chemistry, 75, (18), 4882-4886, (2003)

atrazine

Svenson J et al., The role of functional monomer-template complexation on the performance of atrazine molecularly imprinted polymers.
Analytical Letters, 38, (1), 57-69, (2005)

atrazine

D’Agostino G et al., Potentiometric sensor for atrazine based on a molecular imprinted membrane.
Biosensors and Bioelectronics, 22, (1), 145-152, (2006)

atrazine

Kubo A et al., Atrazine-imprinted microspheres prepared using a microfluidic device.
Chemistry Letters, 35, (6), 588-589, (2006)

atrazine

Amalric L et al., Molecularly imprinted polymer applied to the determination of the residual mass of atrazine and metabolites within an agricultural catchment (Brevilles, France).
Journal of Chromatography A, 1206, (2), 95-104, (2008)

atrazine

Koohpaei AR et al., Molecular Imprinted Solid Phase Extraction for Determination of Atrazine in Environmental Samples.
Iranian Journal of Environmental Health Science & Engineering, 5, (4), 283-296, (2008)

atrazine

Kubo I et al., Atrazine sensing chip based on molecularly imprinted polymer layer.
Electrochemistry, 76, (8), 541-544, (2008)

atrazine

Lara FJ et al., Evaluation of a molecularly imprinted polymer as in-line concentrator in capillary electrophoresis.
Electrophoresis, 29, (18), 3834-3841, (2008)

atrazine

Lieberzeit PA et al., Nanostructured Particles and Layers for Sensing Contaminants in Air and Water.
Nano, 3, (4), 205-208, (2008)

atrazine

Sergeyeva TA et al., Data on the structure and recognition properties of the template-selective binding sites in semi-IPN-based molecularly imprinted polymer membranes.
Materials Science and Engineering: C, 28, (8), 1472-1479, (2008)

atrazine

Wu Z et al., Label-Free Colorimetric Detection of Trace Atrazine in Aqueous Solution by Using Molecularly Imprinted Photonic Polymers.
Chemistry - A European Journal, 14, (36), 11358-11368, (2008)

atrazine

Hu YL et al., Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system.
Talanta, 79, (3), 576-582, (2009)

atrazine

Kueseng P et al., Molecularly imprinted polymer for analysis of trace atrazine herbicide in water.
Journal of Environmental Science and Health Part B-Pesticides Food Contaminants and Agricultural Wastes, 44, (8), 772-780, (2009)

atrazine

Le Noir M et al., Removal of endocrine-disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving-bed reactor.
Journal of Separation Science, 32, (9), 1471-1479, (2009)

Atrazine

Matsui J et al., Molecularly imprinted nanocomposites for highly sensitive SPR detection of a non-aqueous atrazine sample.
Analyst, 134, (1), 80-86, (2009)

atrazine

Mhaka B et al., Selective extraction of triazine herbicides from food samples based on a combination of a liquid membrane and molecularly imprinted polymers.
Journal of Chromatography A, 1216, (40), 6796-6801, (2009)

atrazine

Pardieu E et al., Molecularly imprinted conducting polymer based electrochemical sensor for detection of atrazine.
Analytica Chimica Acta, 649, (2), 236-245, (2009)

atrazine

Pesavento M et al., Molecularly Imprinted Polymer-Based Sensors for Amperometric Determination of Nonelectroactive Substances.
Electroanalysis, 21, (3-5), 604-611, (2009)

atrazine

Zhang Y et al., Microwave Heating in Preparation of Magnetic Molecularly Imprinted Polymer Beads for Trace Triazines Analysis in Complicated Samples.
Analytical Chemistry, 81, (3), 967-976, (2009)

atrazine

Boonjob W et al., Online Hyphenation of Multimodal Microsolid Phase Extraction Involving Renewable Molecularly Imprinted and Reversed-Phase Sorbents to Liquid Chromatography for Automatic Multiresidue Assays.
Analytical Chemistry, 82, (7), 3052-3060, (2010)

atrazine

Malitesta C et al., X-Ray Photoelectron Spectroscopy characterization of electrosynthesized poly(3-thiophene acetic acid) and its application in Molecularly Imprinted Polymers for atrazine.
Thin Solid Films, 518, (14), 3705-3709, (2010)

atrazine

See HH et al., Determination of triazine herbicides using membrane-protected carbon nanotubes solid phase membrane tip extraction prior to micro-liquid chromatography.
Journal of Chromatography A, 1217, (11), 1767-1772, (2010)

atrazine

Silva RGC et al., Molecularly imprinted silica as a selective SPE sorbent for triazine herbicides.
Journal of Separation Science, 33, (9), 1319-1324, (2010)

atrazine

Wang YH et al., Preparation and Application of Atrazine Molecularly Imprinted Solid Phase Extraction Pillar.
Chinese Journal of Analytical Chemistry, 38, (5), 678-682, (2010)

atrazine

Chimuka L et al., Selective extraction of triazine herbicides based on a combination of membrane assisted solvent extraction and molecularly imprinted solid phase extraction.
Journal of Chromatography A, 1218, (5), 647-653, (2011)

atrazine

Latif U et al., Dual and tetraelectrode QCMs using imprinted polymers as receptors for ions and neutral analytes.
Analytical and Bioanalytical Chemistry, 400, (8), 2507-2515, (2011)

atrazine

Liu RY et al., Core-shell nanostructured molecular imprinting fluorescent chemosensor for selective detection of atrazine herbicide.
Analyst, 136, (1), 184-190, (2011)

atrazine

Tan F et al., Evaluation of a novel microextraction technique for aqueous samples: Porous membrane envelope filled with multiwalled carbon nanotubes coated with molecularly imprinted polymer.
Journal of Separation Science, 34, (6), 707-715, (2011)

atrazine

Xu SF et al., Molecularly imprinted polymers by reversible addition-fragmentation chain transfer precipitation polymerization for preconcentration of atrazine in food matrices.
Talanta, 85, (1), 282-289, (2011)

atrazine

Xu SF et al., Molecularly imprinted core-shell nanoparticles for determination of trace atrazine by reversible addition-fragmentation chain transfer surface imprinting.
Journal of Materials Chemistry, 21, (12), 4346-4351, (2011)

Au(III)

Baba Y et al., A Quantitative Consideration for Template Effect of Palladium(II) Using N-[Pyridylmethyl] Chitosan.
Solvent Extraction and Ion Exchange, 29, (3), 509-517, (2011)

automotive engine oil

Proceeding, Lieberzeit PA et al, Acoustic chemosensors for real-life environments,
431-433, (2008)

automotive engine oil

Mujahid A et al., Imprinted sol-gel materials for monitoring degradation products in automotive oils by shear transverse wave.
Analytica Chimica Acta, 675, (1), 53-57, (2010)

auxin

Zhang Y et al., Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues.
Journal of Chromatography A, 1217, (47), 7337-7344, (2010)

auxins

Hu YL et al., Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.
Analytical and Bioanalytical Chemistry, 399, (10), 3367-3374, (2011)

avermectin

Tom LA et al., Development of a molecularly imprinted polymer for the analysis of avermectin.
Analytica Chimica Acta, 680, (1-2), 79-85, (2010)

avidin

Menaker A et al., Electrosynthesized Surface-Imprinted Conducting Polymer Microrods for Selective Protein Recognition.
Advanced Materials, 21, (22), 2271-2275, (2009)

avidin

Lautner G et al., Selective Artificial Receptors Based on Micropatterned Surface-Imprinted Polymers for Label-Free Detection of Proteins by SPR Imaging.
Advanced Functional Materials, 21, (3), 591-597, (2011)

AZA

Fe�s X et al., Syntheses of molecularly imprinted polymers: Molecular recognition of cyproheptadine using original print molecules and azatadine as dummy templates.
Analytica Chimica Acta, 631, (2), 237-244, (2009)

azatadine

AzoCO2H

Yang DH et al., Facile fabrication of molecularly imprinted cavities in spin-coated TiO2 nanofilms.
Chemistry Letters, 34, (12), 1686-1687, (2005)

AZT

Duy SV et al., Molecularly imprinted polymer for analysis of zidovudine and stavudine in human serum by liquid chromatography-mass spectrometry.
Journal of Chromatography B, 877, (11-12), 1101-1108, (2009)

top

Aβ1-40

Aβ1-42

Aβ33-40

Aβ33-42

AA

ABO blood groups

ABO subgroups

acenaphthene

acenaphthene

acephate

4-acetamido-2-ethoxybenzoic acid methyl ester

4-acetamidophenol

4-acetamidophenol

4-acetamidophenyl-(4-vinylphenyl) carbonate

acetaminophen

acetaminophen

acetanilide

acetazolamide

acetochlor

acetochlor

acetominophen

acetominophen

acetophenone

acetylsalicylic acid

acetyl salicylic acid

acidic pharmaceuticals

acid NSAIDs

acifluorfen

Ac-L-Trp

Ac-L-Trp

acryloyloxyhexyl cholamide

ACZ

AD

adenine

adenine

adenine

adenosine

adenosine

adenosine 3’,5’-cyclic monophosphate

adenosine 3’,5’-cyclic monophosphate

adenosine-5’-monophosphate

adenosine 5’-monophosphate

adenosine triphosphate

adrenalin

adrenalin

adrenaline

adrenaline

aflatoxin

aflatoxin B1

aflatoxin B1

Ag+

Ag+

Ag+

Ag(I)

Ag(I)

Ag(I)

β-agonists

β-agonists

β2-agonists

agroclavine

Al3+

Ala-Lys

alanine

alanine anilide

albendazole

albumin

albumin

albumin

albumin

albumin

albumin

Albumin

Alcian Blue 8GX

alfuzosin

algae

Al(III)

Al(III)

allergen

alpha-blocker

alprenolol